International Harvester 3288 Tractor (1985)
Manufacturer:International Harvester
Price:40,000(USD)
Series:30 Series
Model:3288
Equipment Type: Row-Crop Tractors
Factory:Rock Island, Illinois, USA
Full Specifications
NEBRASKA TRACTOR TEST 1438 2
- Description
- Diesel 16-speed 2WD June 4 - 11, 1982 Link: Nebraska Tractor Test 1438 file PTO performance Drawbar performance
- Power at rated engine speed
- 90.46hp / 67.5kW
- Fuel use
- 6.1gal/hour / 23.1l/hour
- Power at rated PTO speed
- 88.33hp / 65.9kW
- Max power
- 79.71hp / 59.4kW
- Max pull
- 11486lbs / 5210kg
INTERNATIONAL HARVESTER 3288 POWER
- Drawbar (claimed)
- 80.7hp / 60.2kW
- PTO (claimed)
- 90hp / 67.1kW
- Drawbar (tested)
- 79.71hp / 59.4kW
- PTO (tested)
- 90.46hp / 67.5kW
ENGINE DETAIL
- Description
- International Harvester D358 diesel 6-cylinder liquid-cooled
- Displacement
- 358ci / 5.9L
- Bore/Stroke
- 3.875x5.060inches / 98x 129mm
- Air cleaner
- dual dry element
- Compression
- 14.8:1
- Rated RPM
- 2400
- Idle RPM
- 900-2400
- Starter volts
- 12
- Coolant capacity
- 24qts / 22.7L
ENGINE OIL
- Oil capacity
- 11qts / 10.4L
INTERNATIONAL HARVESTER 3288 ENGINE
- Description
- International Harvester 5.9L 6-cyl diesel
TRANSMISSION
- Type
- partial power shift
- Gears
- 16 forward and 8 reverse
- Clutch
- cerametallic disc
- Oil capacity
- 90qts / 85.2L
- Description
- Left lever selects gear, right lever selects high, low, or reverse range. Tractor may be shifted on the move without the clutch between gear pairs (1-2, 3-4, etc). Synchronized shifting, using the clutch, between gear pairs (2 to 3, 4 to 5, etc). The transmission is four-gear with the powershift provided by an electric solenoid actuated Torque Amplifier
SPEEDS
- Description
- With 18.4-34R1 rear tires
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD
- Steering
- power
- Brakes
- hydraulic wet disc
- Cab
- Cab standard with heat and A/C. Optional burgundy or western finish interiors
- Transmission
- 16-speed partial power shift
CAPACITY
- Fuel
- 50gal / 189.3L
- Hydraulic system
- 22.5gal / 85.2L
HYDRAULICS
- Type
- open center
- Capacity
- 22.5gal / 85.2L
- Valves
- 2 or 3
- Pump flow
- 15gpm / 56.8lpm
- Total flow
- 27gpm / 102.2lpm
- Steering flow
- 12gpm / 45.4lpm
TRACTOR HITCH
- Rear Type
- II
- Control
- draft sensing
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540/1000
- Engine RPM
- 540@2100 / 1000@2100
INTERNATIONAL HARVESTER 3288 TIRES
- Ag front
- 9.5L-15
- Ag rear
- 18.4-34
DIMENSIONS
- Wheelbase
- 105inches / 266cm
- Length
- 184inches / 467cm
- Width
- 102inches / 259cm *Width at minimum tread
- Height (cab)
- 112inches / 284cm
- Shipping weight
- 11100lbs / 5034kg
- Operating weight
- 11,760lbs / 5334kg
- Ground clearance
- 13inches / 33cm
- Rear axle
- 3.25 by 118inches / 82by 2997mm
DIMENSIONS & TIRES
- Wheelbase
- 105inches / 266cm
- Weight
- 11100 to 11760 pounds
- Front tire
- 9.5L-15
- Rear tire
- 18.4-34
3288 SERIAL NUMBERS
- Location
- Serial number plate on the right side of the tractor frame, ahead of the rear axle
- 1981
- 501
- 1982
- 1063
- 1983
- 1286
- 1984
- 1464
- 1985
- 1651
ELECTRICAL
- Ground
- negative
- Battery volts
- 12
About International Harvester Tractor
The 3288 model tractor belongs to the 30 Series of tractors from International Harvester. The 3288 is a Row-Crop Tractors type, that is used often in Agriculture Tractors. A engine powers the 3288 tractor. This setup provides real-world usage.
Row-Crop Tractors
