AGCO Allis 9630 Tractor (1995)
Manufacturer:AGCO Allis
Price:72,000(USD)
Series:9600 Series
Model:9630
Equipment Type: Row-Crop Tractors
Factory:
Full Specifications
OCED TRACTOR TEST 1674 2
- Description
- Diesel 18-speed 4WD April 8 - May 5, 1994 Link: OCED Tractor Test 1674 file PTO performance Drawbar performance Gear 7 used for power test Gear 3 used for pull test
- Max power
- 120.01hp / 89.5kW
- Fuel use
- 8.7gal/hour / 32.9l/hour
- Power at rated engine speed
- 135.76hp / 101.2kW
- Power at rated PTO speed
- 143.81hp / 107.2kW
- Max pull
- 19367lbs / 8784kg
AGCO ALLIS 9630 POWER
- PTO (claimed)
- 135hp / 100.7kW
- Drawbar (tested)
- 120.01hp / 89.5kW
- PTO (tested)
- 144.71hp / 107.9kW
ENGINE DETAIL
- Description
- Deutz BF6L913C turbocharged intercooled diesel 6-cylinder air-cooled
- Displacement
- 374ci / 6.1L
- Bore/Stroke
- 4.02x4.92inches / 102x 125mm
- Compression
- 15.5:1
- Rated RPM
- 2400
- Starter volts
- 12
- Oil capacity
- 17qts / 16.1L
AGCO ALLIS 9630 ENGINE
- Description
- Deutz 6.1L 6-cyl diesel
- Fuel tank
- 67gal / 253.6L
TRANSMISSION
- Type
- full power shift
- Gears
- 18 forward and 9 reverse
- Clutch
- hydraulic wet disc
MECHANICAL
- Chassis
- 4x2 2WD / 4x4 MFWD 4WD
- Final drives
- inboard planetary
- Differential lock
- electro-hydraulic
- Steering
- power
- Brakes
- hydraulic wet disc
- Cab
- Cab standard
- Transmission
- 18-speed full power shift
HYDRAULICS
- Type
- closed center pressure-compensating
- Pressure
- 2250psi / 155.1bar
- Valves
- 3
- Pump flow
- 24gpm / 90.8lpm *Advertised Flow during testing was 22.6 GPM
TRACTOR HITCH
- Rear Type
- III/II
- Control
- lower-link draft sensing
- Rear lift
- 7212lbs / 3271kg *During testing, actual lift was 5913 pounds 8544lbs / 3875kg *Claimed lift with optional assist cylinder. During testing, actual lift was 6962 pounds.
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Clutch
- hydraulic wet disc
- Rear RPM
- 540/1000
AGCO ALLIS 9630 TIRES
- 2WD Standard tires (ag)
- Front: 11.00-16. Rear: 18.4R38
- 4WD Standard tires (ag)
- Front: 14.9R28. Rear: 18.4R38
DIMENSIONS
- 2WD Wheelbase
- 124inches / 314cm
- 4WD Wheelbase
- 116.5inches / 295cm
- 2WD Length
- 187.5inches / 476cm
- 4WD Length
- 196.5inches / 499cm
- Width
- 96inches / 243cm
- Height (cab)
- 119.7inches / 304cm
- 2WD Clearance (front axle)
- 23inches / 58cm
- 4WD Clearance (front axle)
- 22.5inches / 57cm
- Clearance (drawbar)
- 15.5inches / 39cm
- Rear axle
- 3.875 by 115inches / 98by 2921mm
AGCO ALLIS 9630 WEIGHT
- 2WD Shipping
- 14800lbs / 6713kg
- 4WD Shipping
- 16100lbs / 7302kg
- 4WD Operating
- 17028lbs / 7723kg
DIMENSIONS & TIRES
- 2WD Wheelbase
- 124inches / 314cm
- 4WD Wheelbase
- 116.5inches / 295cm
- Weight
- 14800 to 17028 pounds
- Front tire
- 11.00-16
- 2WD Rear tire
- 18.4R38
9630 SERIAL NUMBERS
- Location
- Console, right side
- 1994
- 921001
- 1995
- 921501
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 105
- Batteries
- 2
- Battery CCA
- 580
- Battery volts
- 12
About AGCO Allis Tractor
The 9630 tractor is part of the AGCO Allis's 9600 Series. The 9630 is classified as a Row-Crop Tractors and that is primarily used for Agriculture Tractors production. The 9630 tractor is equipped by a engine. This setup is more practical in the real world.
