John Deere 2032R Tractor
Manufacturer:John Deere
Price:23,910(USD)
Series:2 Series
Model:2032R
Equipment Type: Compact Tractors
Factory:None
Full Specifications
KEY SPECS
- Engine power (gross)
- At SAE J1995 rated power: 22.9 kW/31.2 hp
- Power take-off (PTO) power
- 18 kW/24.2 hp
- Steering hydraulics
- 15 L/min/4 gpm
- Implement hydraulics
- 20.2 L/min/5.3 gpm
- Hitch type
- Category 1
- Lift capacity, 24-in. behind link arms
- 615 kg/1356 lb
- Standard transmission; forward/reverse
- Hydrostatic transmission (HST)
- Cruise control
- Standard
- Approximate shipping weight (open-station; cab)
- Open station: 1306 kg/2879 lb/Cab: Not applicable
- Wheelbase
- 1723 mm/67.8 in.
ENGINE
- Manufacturer
- Yanmar®
- Engine model
- 3TNV88C-NJT2
- Engine power (gross)
- At SAE J1995 rated power: 22.9 kW/31.2 hp
- Power take-off (PTO) power
- 18 kW/24.2 hp
- Rated engine speed
- 2500 rpm
- Type
- Direct Injection
- Injection pump type
- Direct Injection
- Aspiration
- Natural
- Emissions compliance
- Final Tier 4
- Cylinders/displacement
- Three cylinders: 1.642 L/100.2 cu in.
- Number of cylinders
- Three
- Cylinder liners
- Cast-in-block
- Bore and stroke
- 88x90 mm/3.46x3.54 in.
- Compression ratio
- 19.1:1
- Lubrication
- Pressurized
- Cooling system
- Water pump
- Air cleaner
- Dual element
- Engine torque at rated speed
- 87.5 Nm/64.5 lb-ft
- Fuel tank capacity
- 32 L/8.5 U.S. gal.
ELECTRICAL
- Battery size
- 500 CCA
- Alternator (12-V)
- 85 amp
- Starter size
- 1.4 kW/1.9 hp
FUEL SYSTEM
- Type
- Direct Injection
TRANSMISSION
- Standard transmission; forward/reverse
- Hydrostatic transmission (HST)
- Final drive
- Spur gear
- Brakes
- Wet disc
- Steering
- Power steering
- Axle capacity
- Front/880 kg/1940 lb/Rear/1800 kg/3968 lb/
- Creeper
- No
- Cruise control
- Standard
- Differential lock
- Yes
HYDRAULICS
- Type
- Open center
- Pump rated output
- Steering/15 L/min/4 gpm/Implement/20.2 L/min/5.3 gpm/35.2 L/min/9.3 gpm
- Pump type
- Dual gear
- Maximum operating pressure
- 172 bar/2495 psi
- Draft control sensing
- Position control
- Remote control valves available
- Up to three
3-POINT HITCH
- Type
- Category 1
- Lift capacity, 24-in. behind link arms
- 615 kg/1356 lb
POWER TAKE-OFF (PTO)
- Standard
- Rear: 543 rpm/Mid: 1998 rpm
- Control
- Independent
- Clutch
- Wet disc
- Brake (for mid and rear PTO)
- Wet disc
FLUID CAPACITIES
- Crankcase with filter
- 4.5 L/4.8 qt
FINAL DRIVE
- Type
- Spur Gear
- Differential lock
- Yes
OPERATOR STATION
- Rollover protective structure
- Type/Foldable/ASABE S478
- Platform - flat/straddle
- Semi-flat
DIMENSIONS
- Wheelbase
- 1723 mm/67.8 in.
- Turning radius with brakes
- 2.46 m/8.07 ft
- Approximate shipping weight (open-station; cab)
- Open station: 1306 kg/2879 lb/Cab: Not applicable
TIRES
- Front
- R1 Ag 7.00-12/R3 Turf 23x8.50-14/R4 Industrial 23x8.50-14/R3 Turf Radial 200/60 R15
- Rear
- R1 Ag 12.4-16/R3 Turf 14-17.5/R4 Industrial 14-17.5/R3 Turf Radial 300/70 R20
MISCELLANEOUS
- Toolbox
- Yes
- Tilt steering wheel
- Yes
- 12-V Outlet
- Yes
About John Deere Tractor
The John Deere 2032R tractor is part of the 9R tractor series. The 2032R is a Compact Tractors type, which is used mostly in Agriculture Tractors. The 24.2 horsepower engine of the 2032R tractors is impressive. This setup is more practical in the real world.
