John Deere 5075M Tractor (2008-2022)
Manufacturer:John Deere
Price:38,512(USD)
Series:5M Series
Model:5075M
Equipment Type: Utility Tractors
Factory:Augusta, Georgia, USA
Full Specifications
KEY SPECS
- Engine description
- John Deere PowerTech 3029
- Engine displacement
- 3 cylinder: 2.9 L/179 cu in.
- Rated engine power
- At 2200 rpm per ISO 97/68/EC: 55.1 kW/73.8 hp
- Rated PTO power (hp SAE)
- At 2100 rpm per SAE: 43 kW/57.7 PTO hp
- Transmission type
- Standard: 16F/16R PowrReverser/Optional: 12F/4R SyncShuttle Plus/32F/16R PowrReverser Plus
- Hydraulic pump rated output
- Standard: 94 L/min/24.7 gpm
- Rear hitch category (SAE designation)
- Category 2; convertible to 1
ENGINE SPECIFICATIONS
- Description
- John Deere PowerTech 3029
- Engine family
- EJDXL03.0208
- Aspiration
- Turbocharged and Air-to-Air Aftercooled
- Cylinders liners
- Wet sleeved
- Emission level
- Final Tier 4
- Displacement
- 3 cylinder: 2.9 L/179 cu in.
ENGINE PERFORMANCE
- Rated power
- At 2200 rpm per ISO 97/68/EC: 55.1 kW/73.8 hp
- Rated PTO power (hp SAE)
- At 2100 rpm per SAE: 43 kW/57.7 PTO hp
- PTO torque rise
- At 1400 rpm: 27.2 percent
TRANSMISSION
- Type
- Standard: 16F/16R PowrReverser/Optional: 12F/4R SyncShuttle Plus/32F/16R PowrReverser Plus
- Reverser
- Left hand, mechanical
- Clutch; wet/dry
- Wet
- Creeper
- 32F/16R PowrReverser
HYDRAULIC SYSTEM
- Type
- Open Center
- Pump rated output
- Standard: 94 L/min/24.7 gpm
- Available flow at a single rear SCV
- 70 L/min/18.4 gpm
- Number of rear selective control valves (SCVs)
- 2/up to 3 total
- Number of mid selective control valves (SCVs)
- 2/up to 3 total
- Joystick SCV control
- Standard
REAR HITCH
- Hitch draft control load sense type
- Mechanical or electrohydraulic
- Remote control valves available
- Standard: 2/Optional: 3
- Hitch category (SAE designation)
- Category 2; convertible to 1
- Maximum lift capacity behind lift points
- Standard: 2578 kg/5685 lb/Optional: 2993 kg/5954 lb
- Sensing type
- Lower link
- Rear axle differential lock
- Electrohydraulic
REAR POWER TAKE-OFF (PTO)
- Type
- Standard: Independent 540/540 Economy/Optional: 540/540E/1000
- Engine rpm (at rated PTO speeds)
- 540 at 2100 rpm/540E at 1645 rpm
- PTO actuation
- Electrohydraulic
FRONT HITCH
- Category
- Cat 2
- Standard lift capacity
- 1931 kg/4257 lb
REAR AXLE
- Final drive type
- Inboard planetary
- Differential controls
- Electrohydraulic
- Axle type
- Flanged
- Brakes, type and control
- Hydraulic wet disc
TIRES
- Front
- 2WD: 11LL-15 8PR F2 Firestone/MFWD: 320/85R24 (12.4R24) R1W Radial Firestone
- Rear
- 2WD: 460/85R30 (18.4R30) R1W Firestone/MFWD: 460/85R30 (18.4R30) R1W Firestone
- Wheel tread range
- 2WD: front: 1520-2020 mm/59.8-79.5 in./rear: 1349-2055 mm/53.1-80.9 in./MFWD: front: 1299-1997 mm/51.1-78.6 in.
- Turning radius with brakes
- 2WD: 3.67 m/12.04 ft/MFWD: 3.85 m/12.6 ft
- Turning radius without brakes
- 2WD: 3.85 m/12.6 ft/MFWD: 4.0 m/13.1 ft
OPERATOR STATION
- Rollover protective structure, OOS
- Rigid - foldable - telescopic/Foldable, 2-post/Platform - flat/straddle/Flat/Gearshift location - console/floor/Floor/
- Seat
- Standard: Mech suspension/Optional: air ride
- Instructional seat
- Optional
- Radio
- opt
- dB(A) rating
- 78 dBA
DIMENSIONS
- Wheelbase
- 2WD and MFWD: 2350 mm/92.5 in.
- Approximate shipping weight, Open;Cab
- 2WD: Open: 3700 kg/8140 lb/Cab: 3900 kg/8580 lb/MFWD: Open: 3975 kg/8765 lb/Cab: 4175 kg/9185 lb
CAPACITIES
- Fuel tank
- Standard: Open: 111.9 L/29.6 U.S. gal./Cab: 139.1 L/36.7 U.S. gal./Optional: open: 141.2 L/37.3 U.S. gal./Cab: 170.3 L/45 U.S. gal.
MISCELLANEOUS
- Country of manufacture
- Augusta, GA
ADDITIONAL INFORMATION
- Date collected
- 8/10/2017
About John Deere Tractor
The John Deere 5075M tractor is part of the 9R tractor series. The 5075M is a Utility Tractors and that is primarily used for Agriculture Tractors purposes. A 58 horsepower engine powers the 5075M tractor. This configuration gives better real-world usability.
