Ford 2910 Tractor (1989)
Manufacturer:Ford
Price:16,000(USD)
Series:10 Utility Series
Model:2910
Equipment Type: Utility Tractors
Factory:
Full Specifications
NEBRASKA TRACTOR TEST 1491 2
- Description
- Diesel 8x2 2WD September 14 - 28, 1983 Link: Nebraska Tractor Test 1491 file PTO performance Drawbar performance Gear 5 used for power test. Gear 2 used for pull test
- Power at rated engine speed
- 36.62hp / 27.3kW
- Fuel use
- 2.2gal/hour / 8.3l/hour
- Power at rated PTO speed
- 35.09hp / 26.2kW
- Max power
- 29.09hp / 21.7kW
- Max pull
- 4,237lbs / 1921kg
NEBRASKA TRACTOR TEST 1492 2
- Description
- Diesel 8x4 synchro 2WD September 14 - 26, 1983 Link: Nebraska Tractor Test 1492 file PTO performance
- Power at rated engine speed
- 36.40hp / 27.1kW
- Fuel use
- 2.2gal/hour / 8.3l/hour
- Power at rated PTO speed
- 34.75hp / 25.9kW
FORD 2910 POWER
- Engine (gross)
- 44hp / 32.8kW
- Engine
- 40.5hp / 30.2kW
- PTO (claimed)
- 36hp / 26.8kW
- Drawbar (tested)
- 29.09hp / 21.7kW
- PTO (tested)
- 36.62hp / 27.3kW
ENGINE DETAIL
- Description
- Ford diesel 3-cylinder liquid-cooled
- Displacement
- 175ci / 2.9L
- Bore/Stroke
- 4.2x4.2inches / 107x 107 mm
- Power
- 40.5hp / 30.2kW
- Power (gross)
- 44hp / 32.8kW
- Air cleaner
- dry
- Compression
- 17.3:1
- Rated RPM
- 2000
- Torque
- 118 lb-ft /160.0 Nm
- Torque RPM
- 1400
- Starter volts
- 12
- Oil capacity
- 7 qts /6.6 L
- Coolant capacity
- 11qts / 10.4L
FORD 2910 ENGINE
- Description
- Ford 2.9L 3-cyl diesel
TRANSMISSIONS OVERVIEW
- Description
- 8-speed 8-speed synchromesh 6-speed mechanical shuttle
TRANSMISSION 1
- Transmission
- Dual Range
- Gears
- 8 forward and 2 reverse
- Clutch
- 330mm dry disc
- Oil capacity
- 12.7qts / 12.0L
SPEEDS 1
- Description
- With 13.6x28 rear tires
TRANSMISSION 2
- Type
- synchromesh
- Gears
- 8 forward and 4 reverse
- Oil capacity
- 9.9qts / 9.4L
SPEEDS 2
- Description
- With 12.4x28 rear tires
TRANSMISSION 3
- Type
- mechanical shuttle
- Gears
- 6 forward and 4 reverse
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD
- Final drives
- inboard planetary
- Differential lock
- mechanical rear
- Steering
- power assist
- Brakes
- differential wet disc
- Cab
- Two-post fixed ROPS. Cab optional.
- Transmissions
- 8-speed/8-speed synchromesh/6-speed mechanical shuttle
CAPACITY
- Fuel
- 13gal / 49.2L
- Hydraulic system
- 12.1gal / 45.8L
HYDRAULICS
- Type
- open center
- Capacity
- 12.1gal / 45.8L
- Pressure
- 2500psi / 172.4bar
- Pump flow
- 7.7gpm / 29.1lpm/12.8gpm / 48.4lpm
- Steering flow
- 3.6gpm / 13.6lpm
TRACTOR HITCH
- Rear Type
- I
- Control
- position and top-link draft control
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540
- Engine RPM
- 540@1800
FORD 2910 TIRES
- Ag front
- 6.00-16 (2WD)
- Ag rear
- 16.9-24/13.6-28
DIMENSIONS
- 2WD Wheelbase
- 77.5inches / 196cm
- 4WD Wheelbase
- 84.1inches / 213cm
- Length
- 127.2inches / 323cm
- Width
- 68.4inches / 173cm
- 2WD Clearance (front axle)
- 21.5inches / 54cm
- 4WD Clearance (front axle)
- 13.1inches / 33cm
- Clearance (rear axle)
- 20.5inches / 52cm
- 2WD Front tread
- 52 to 80inches / 132to 203 cm
- 4WD Front tread
- 56 to 72inches / 142to 182 cm
- Rear tread
- 56 to 80inches / 142to 203 cm
FORD 2910 WEIGHT
- 2WD Operating
- 4413lbs / 2001kg
- 4WD Operating
- 4948lbs / 2244kg
- Ballasted
- 6000lbs / 2721kg
FORD 2910 HEIGHT
- Steering wheel
- 58.8inches / 149cm
- Hood
- 52.7inches / 133cm
- ROPS
- 93.7inches / 237cm
- Exhaust
- 81.2inches / 206cm
DIMENSIONS & TIRES
- 2WD Wheelbase
- 77.5inches / 196cm
- 4WD Wheelbase
- 84.1inches / 213cm
- Weight
- 4413 to 4948 pounds
- Front tire
- 5.50-16
- Rear tire
- 12.4-28
FORD 776A LOADER
- Loader weight
- 1035lbs / 469kg
- Height (to pin)
- 124inches / 314cm
- Clearance, dumped bucket
- 102inches / 259cm
- Dump reach
- 26inches / 66cm
- Dump angle
- 40°
- Reach at ground
- 75inches / 190cm
- Rollback angle
- 6°
- Breakout force (lift)
- 3750lbs / 1701kg
- Lift to full height (at pin)
- 2500lbs / 1134kg
- Bucket width
- 48inches / 121cm/60inches / 152cm/72inches / 182cm
FORD 776B LOADER
- Loader weight
- 1260lbs / 571kg
- Height (to pin)
- 124inches / 314cm
- Clearance, dumped bucket
- 102inches / 259cm
- Dump reach
- 26inches / 66cm
- Dump angle
- 40°
- Reach at ground
- 75.2inches / 191cm
- Rollback angle
- 6°
- Breakout force (lift)
- 3750lbs / 1701kg
- Lift to full height (at pin)
- 2500lbs / 1134kg
- Bucket width
- 48inches / 121cm/60inches / 152cm/72inches / 182cm
2910 SERIAL NUMBERS
- Location
- Identification plate inside the engine compartment
- 1983
- C694500
- 1984
- C707400
- 1985
- C732600
- 1986
- BA74292
- 1987
- BB05681
- 1988
- BB31777
- 1989
- BB84620
- 1990
- BC26239
- 1991
- BC68791
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Mk I Charging amps
- 32
- Mk II Charging amps
- 51
- Battery volts
- 12
- Battery AH
- 128
About Ford Tractor
The 2910 model tractor belongs to the Ford 10 Utility Series. The 2910 is a Utility Tractors type, that is used mostly in the Agriculture Tractors. The 2910 tractor features a engine. This arrangement more usage in the actual world.
