John Deere 2640 Tractor (1982)
Manufacturer:John Deere
Price:N/A
Series:2040 Series
Model:2640
Equipment Type: Utility Tractors
Factory:Dubuque, Iowa, USA
Full Specifications
NEBRASKA TRACTOR TEST 1157 2
- Description
- Diesel 16-speed 2WD April 16 - 25, 1974 Link: Nebraska Tractor Test 1157 file PTO performance Drawbar performance Gear 5-Hi used for power test Gear 5-Hi used for pull test
- Power at rated engine speed
- 70.37hp / 52.5kW
- Fuel use
- 4.3gal/hour / 16.3l/hour
- Power at rated PTO speed
- 69.02hp / 51.5kW
- Max power
- 57.88hp / 43.2kW
- Max pull
- 6,470lbs / 2934kg
JOHN DEERE 2640 POWER
- PTO (claimed)
- 70hp / 52.2kW
- Drawbar (tested)
- 57.88hp / 43.2kW
- PTO (tested)
- 70.37hp / 52.5kW
ENGINE DETAIL
- Description
- John Deere diesel 4-cylinder liquid-cooled
- Displacement
- 276ci / 4.5L
- Bore/Stroke
- 4.19x5.00inches / 106x 127mm
- Compression
- 16.7:1
- Rated RPM
- 2500
- Firing order
- 1-3-4-2
- Starter volts
- 12
- Coolant capacity
- 12qts / 11.4L
JOHN DEERE 2640 ENGINE
- Description
- John Deere 4.5L 4-cyl diesel
TRANSMISSIONS OVERVIEW
- Description
- 8-speed collar shift 16-speed two-speed power shift 8-speed power shuttle
TRANSMISSION 1
- Type
- collar shift
- Gears
- 8 forward and 4 reverse
- Description
- Four gears (1-4) in two ranges (I and II) plus reverse (R) range
SPEEDS 1
- Description
- With 16.9-28 rear tires
TRANSMISSION 2
- Transmission
- Hi-Lo
- Type
- two-speed power shift
- Gears
- 16 forward and 8 reverse
- Clutch
- dry disc
SPEEDS 2
- Description
- With 16.9-28 rear tires
TRANSMISSION 3
- Transmission
- Direction Reverser
- Type
- power shuttle
- Gears
- 8 forward and reverse
- Description
- Four gears (1-4) in two ranges (I and II) with a left-hand hydraulic shuttle leve
MECHANICAL
- Chassis
- 4x2 2WD
- Final drives
- planetary
- Differential lock
- mechanical rear
- Steering
- mechanical with power assist
- Brakes
- differential hydraulic wet disc
- Cab
- Open operator station
- Transmissions
- 8-speed collar shift 16-speed two-speed power shift 8-speed power shuttle
CAPACITY
- Fuel
- 19.5gal / 73.8L
- Hydraulic system
- 10gal / 37.9L
HYDRAULICS
- Type
- closed center
- Capacity
- 10gal / 37.9L
- Pressure
- 2250psi / 155.1bar
- Pump flow
- 9gpm / 34.1lpm 15gpm / 56.8lpm
TRACTOR HITCH
- Rear Type
- II/I
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540/540/1000
JOHN DEERE 2640 TIRES
- Ag front
- 6.00-16
- Ag rear
- 16.9-28
DIMENSIONS
- Wheelbase
- 85.75inches / 217cm *Straight axle
- Length
- 139.5inches / 354cm
- Width
- 69.5inches / 176cm
- Height (hood)
- 61.3inches / 155cm
- Height (exhaust)
- 101.7inches / 258cm
- Operating weight
- 5800lbs / 2630kg
- Ballasted weight
- 8430lbs / 3823kg
- Clearance (front axle)
- 25.6inches / 65cm
- Front tread
- 49 to 79inches / 124to 200cm (swept axle)
- Rear tread
- 52 to 97inches / 132to 246cm (rack-and-pinion)
DIMENSIONS & TIRES
- Wheelbase
- 85.75inches / 217cm *Straight axle
- Weight
- 5800lbs / 2630kg
- Front tire
- 6.00-16
- Rear tire
- 16.9-28
2640 SERIAL NUMBERS
- Location
- Serial number plate on the right side of the 2640 frame above the front axle
- 1976
- 235313
- 1977
- 258106
- 1978
- 280789
- 1979
- 305505
- 1980
- 341000
- 1981
- 362175
- 1982
- 376744
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Battery volts
- 12
About John Deere Tractor
The 2640 model tractor belongs to the 2040 Series of tractors from John Deere. The 2640 is a Utility Tractors type, which is used most often in Agriculture Tractors. A engine powers the 2640 tractor. This configuration gives better real-world usability.
Utility Tractors
