John Deere 8960 Tractor (1993)
Manufacturer:John Deere
Price:142,000(USD)
Series:8060 Series
Model:8960
Equipment Type: Four-wheel Drive 4WD Tractors
Factory:Waterloo, Iowa, USA
Full Specifications
OCED TRACTOR TEST 1625 2
- Description
- Diesel Powrsync 4WD May 1 - June 1, 1989 Link: OCED Tractor Test 1625 file PTO performance Drawbar performance
- Max power
- 308.26hp / 229.9kW
- Fuel use
- 19.2gal/hour / 72.7l/hour
- Power at rated engine speed
- 333.40hp / 248.6kW
- Max pull
- 34,462lbs / 15631kg
OCED TRACTOR TEST 1632 2
- Description
- Diesel Power Shift 4WD September 1 - October 1, 1989 Link: OCED Tractor Test 1632 file PTO performance Drawbar performance Gear 6 used for power test Gear 1 used for pull test
- Max power
- 302.04hp / 225.2kW
- Fuel use
- 19.5gal/hour / 73.8l/hour
- Power at rated engine speed
- 332.25hp / 247.8kW
- Max pull
- 34,913lbs / 15836kg
JOHN DEERE 8960 POWER
- Engine
- 370hp / 275.9kW
- PTO (claimed)
- 332hp / 247.6kW
- Drawbar (tested)
- 308.26hp / 229.9kW
- PTO (tested)
- 337.42hp / 251.6kW
ENGINE DETAIL
- Description
- Cummins turbocharged diesel 6-cylinder liquid-cooled
- Displacement
- 855ci / 14.0L
- Bore/Stroke
- 5.50x6.00inches / 140x 152mm
- Power
- 370hp / 275.9kW
- Air cleaner
- dual paper elements with aspirator
- Compression
- 14.0:1
- Rated RPM
- 1900
- Starter volts
- 12
- Coolant capacity
- 72qts / 68.1L
JOHN DEERE 8960 ENGINE
- Description
- Cummins 14.0L 6-cyl diesel
TRANSMISSIONS OVERVIEW
- Description
- 12-speed partially synchronized 24-speed partial power shift 12-speed full power shift
TRANSMISSION 1
- Transmission
- John Deere Syncro
- Type
- partially synchronized
- Gears
- 12 forward and 3 reverse
- Clutch
- hydraulic wet disc
- Description
- Three speeds (1-3) in four ranges (A-D). Synchronized shifting between speeds
TRANSMISSION 2
- Transmission
- John Deere PowrSync
- Type
- partial power shift
- Gears
- 24 forward and 6 reverse
- Clutch
- hydraulic wet disc
- Description
- Six speeds (1-6) in four ranges (A-D). Power shift between speeds 1-2, 3-4, and 5-6. Synchronized shifting between other gears and ranges
TRANSMISSION 3
- Transmission
- John Deere Power Shift
- Type
- full power shift
- Gears
- 12 forward and 2 reverse
- Clutch
- hydraulic wet disc
MECHANICAL
- Chassis
- 4x4 articulated 4WD
- Steering
- articulated power
- Brakes
- hydraulic wet disc
- Cab
- Sound-Gard Cab standard
- Transmissions
- 12-speed partially synchronized 24-speed partial power shift 12-speed full power shift
CAPACITY
- Fuel
- 220gal / 832.7L
- Hydraulic system
- 47gal / 177.9L
HYDRAULICS
- Type
- closed-center pressure compensated
- Capacity
- 47gal / 177.9L
- Valves
- 3
- Pump flow
- 39.6gpm / 149.9lpm
- SCV flow
- 33.3gpm / 126.0lpm
TRACTOR HITCH
- Rear Type
- IV
- Rear lift
- 13966lbs / 6334kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 1000
JOHN DEERE 8960 TIRES
- Ag front
- 20.8R-38
- Ag rear
- 20.8R-38
DIMENSIONS
- Wheelbase
- 134inches / 340cm
- Length
- 268.9inches / 683cm
- Operating weight
- 35115lbs / 15928kg *Weight with 20.8R42 duals
DIMENSIONS & TIRES
- Wheelbase
- 134inches / 340cm
- Weight
- 35115lbs / 15928kg
- Front tire
- 20.8R-38
- Rear tire
- 20.8R-38
8960 SERIAL NUMBERS
- Location
- Data plate behind left-side step
- 1989
- 1001
- 1990
- 1501
- 1991
- 2501
- 1992
- 2937
- 1993
- 4449
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 120
- Batteries
- 3
- Battery CCA
- 925
- Battery volts
- 12
About John Deere Tractor
The 8960 model tractor is member of John Deere's 9R line of tractors. The 8960 is a Four-wheel Drive 4WD Tractors and which is mostly used for Agriculture Tractors purposes. The engine of the 8960 tractors is impressive. This setup offers a increased usability in the actual world.
