AGCO Allis 9190 Tractor (1992)
Manufacturer:AGCO Allis
Price:90,200(USD)
Series:9100 Series
Model:9190
Equipment Type: Row-Crop Tractors
Factory:Coldwater, Ohio, USA
Full Specifications
NEBRASKA TRACTOR TEST 1635 2
- Description
- Diesel 18-speed 4WD October 24 - November 13, 1989 Link: Nebraska Tractor Test 1635 file PTO performance Drawbar performance Gear 3D used for power test Gear 2D used for pull test
- Power at rated engine speed
- 193.55hp / 144.3kW
- Fuel use
- 12.5gal/hour / 47.3l/hour
- Power at rated PTO speed
- 196.96hp / 146.9kW
- Max power
- 170.30hp / 127.0kW
- Max pull
- 18,970lbs / 8604kg
AGCO ALLIS 9190 POWER
- Drawbar (claimed)
- 173hp / 129.0kW
- PTO (claimed)
- 193hp / 143.9kW
- Drawbar (tested)
- 170.30hp / 127.0kW
- PTO (tested)
- 193.55hp / 144.3kW
ENGINE DETAIL
- Description
- Deutz BF6L513R turbocharged diesel 6-cylinder air-cooled
- Displacement
- 584ci / 9.6L
- Bore/Stroke
- 4.92x5.12inches / 125x 130 mm
- Compression
- 15.8:1
- Rated RPM
- 2300
- Starter volts
- 12
- Oil capacity
- 23.5qts / 22.2L
AGCO ALLIS 9190 ENGINE
- Description
- Deutz 9.6L 6-cyl diesel
- Fuel tank
- 90gal / 340.7L
TRANSMISSION
- Type
- three-speed power shift
- Gears
- 18 forward and 6 reverse
- Clutch
- 330mm dry disc
- Description
- Six forward gears, each with a three-speed power shift
SPEEDS
- Description
- With 20.8R38 rear tires
MECHANICAL
- Chassis
- 4x4 MFWD 4WD
- Final drives
- inboard planetary
- Differential lock
- electro-hydraulic rear
- Steering
- power
- Brakes
- hydraulic wet disc
- Cab
- Cab standard with air-conditioning
- Transmission
- 18-speed three-speed power shift
HYDRAULICS
- Type
- closed center
- Pressure
- 2500psi / 172.4bar
- Valves
- 2 or 3
- Pump flow
- 24gpm / 90.8lpm
TRACTOR HITCH
- Rear Type
- III/II
- Control
- position and draft control
- Rear lift (at ends)
- 9898lbs / 4489kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 1000 (1.75)
- Engine RPM
- 1000@2168
AGCO ALLIS 9190 TIRES
- Standard tires (ag)
- Front: 16.9R28. Rear: 20.8R38
DIMENSIONS
- Wheelbase
- 115inches / 292cm
- Length
- 200inches / 508cm
- Width
- 96inches / 243cm *Width over standard axle
- Height (cab)
- 121inches / 307cm
- Height (exhaust)
- 120inches / 304cm
- Weight
- 16600lbs / 7529kg
- Rear axle
- Bar: 3.875 by 115inches / 98by 2921 mm
- Front tread
- 61 to 87inches / 154to 220 cm
- Rear tread
- 62 to 102inches / 157to 259 cm
DIMENSIONS & TIRES
- Wheelbase
- 115inches / 292cm
- Weight
- 16600lbs / 7529kg
- Front tire
- 16.9R28
- Rear tire
- 20.8R38
9190 SERIAL NUMBERS
- 1989
- 1001
- 1990
- 1369
- 1991
- 2001
- 1992
- 23500
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 105
- Batteries
- 2
- Battery volts
- 12
About AGCO Allis Tractor
The AGCO Allis 9190 tractor is part of the 9100 Series. The 9190 is a kind of Row-Crop Tractors and that is often used for Agriculture Tractors purposes. The 9190 tractor is powered by a engine. This setup offers a broader usability in the actual world.
