Standard: Four SCVs/Optional: Three to six ISO couplers: 12.7 mm/1/2 in./Five ISO couplers (SCV 1: 19-mm [3/4-in.] couplers, SCV 2-5: 12.7-mm [1/2-in.] coupler)
Number of front selective control valves (SCVs)
One with front hitch
SCV control
Electronic
REAR HITCH
Hitch category (SAE designation)
Standard: Category 3/3N with Quik-Coupler/Optional: Category 3/3N with hook ends
Maximum lift capacity behind lift points
Standard (Category 3): 5443 kg/12,000 lb/Optional (Category 3N): 6894 kg/15,200 lb/Standard (Category 3 with hook ends): 5443 kg/Optional (Category 3 with hook ends): 6894 kg/15,000 lb
Sensing type
Electrohydraulic
DRAWBAR
Drawbar category
Standard: Category 3/Optional: Category 3 with heavy-duty support/Category 4
Independent/Standard: 44.45 mm (1.75 in.) 20-spline, 1,000 rpm/Optional: 44.45 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm/44.45 mm (1.75 in.) 20-spline, 1000 rpm with 35-mm (1.375-in.) 540E/1000/1000E rpm gearcase/44.45 mm (1.75 in.) 20-spline, 1000 rpm with 35-mm (1.375-in.) 540/540E/1000 rpm gearcase
Engine rpm (at rated PTO speeds)
540/1000 PTO rpm at 1950 engine rpm/540E/1000E PTO rpm at 1750 engine rpm
PTO actuation
Electric switch with adjustable modulation
FRONT HITCH
Category
Category 3N, ground engaging
Electric power
Seven-pin connector
Standard lift capacity
5,200 kg/11,464 lb
Front power take-off (PTO)
Available: 35 mm (1.375 in.) 21 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)/Available through Parts: 44.45 mm (1.75 in.), 20 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)
PTO speed
1,000 PTO rpm at 1940 engine rpm
REAR AXLE
Type
Standard: Rack-and-pinion or flange axles/Optional: Diameter: 100 x 3010 mm/3.94 x 118.5 in./Diameter: 100 x 2808 mm/3.94 x 110.5 in./Diameter: 100 x 2550 mm/3.94 x 100.4 in./Flanged axle: 335 mm/13.2 in.
Final drive type
Inboard planetary three pinion
Rear differential lock
Full-locking electrohydraulic
FRONT AXLE
Type
Standard: 1300 Series MFWD: tread range 1524 to 2235 mm/60 to 88 in./Optional: TLS: Tread range 1524 to 2235 mm/TLS with front brakes available with 40 km/h/24.9 mph/TLS with front brakes standard with 50 km/h/31 mph
Front axle differential lock
1300 Series MFWD: Limited slip/TLS: Limited slip/TLS with front brakes: Full-locking electrohydraulic (actuated at same time as rear diff lock)
TIRES
Front
RCI Group 42/43
Rear
RCI Group 47/48
Turning radius with brakes
380/85R34 group 42 tires at 152.4-cm (60-in.) spacing 1300: 7 m/23 ft/600/70R30 group 43 tires at 188.2-cm (74.1-in.) spacing TLS: 6.7 m/22 ft
STEERING
Type
Standard: Hydraulic power-steering with electric pump back-up/Optional: ActiveCommand Steering 2 (ACS2) w/ electronic back-up pump
ELECTRICAL SYSTEM
Alternator size
Standard: 210 amp/Optional: 250 amp
Battery options
12 V
Working lights
Standard: 18 halogen/Available: 18 LED or 22 LED
Type of bulb in headlight (Halogen, Zenon, LED)
Standard: 65-W halogen/Available: LED
Total cold cranking amps
With two 925 CCA group 31 batteries: 1850 CCA
OPERATOR STATION
Seat
Degree of seat swivel, left hand/Optional: 25 degree/Degree of seat swivel, right hand/40 degree/Standard: air suspension/Optional: ActiveSeat II
Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume
3.24 m3/114 cu ft
Cab glass area
6.56 m2/70.61 sq ft
DIMENSIONS
Wheelbase
2925 mm/115.2 in.
Overall length
5520 mm/217 in.
Drawbar clearance
Group 47 rear tires: 360 mm/14.2 in./Group 48 rear tires: 415 mm/16.3 in.
WEIGHT
Base machine weight
e23, TLS, 18.4R46: 10,000 kg/22,000 lb
Maximum ballast level
SAE PTO hp: 65.8 kg/145 lb
CAPACITIES
Crankcase oil volume
26 L/6.9 U.S. gal.
Fuel tank
e23: 463 L/122 U.S. gal./IVT: 513 L/135 U.S. gal.
Diesel exhaust fluid (DEF) tank
26.2 L/6.9 U.S. gal.
Cooling system
39.5 L/10.4 U.S. gal.
Transmission-hydraulic system
160 L/42.3 U.S. gal.
SERVICEABILITY
Interval for engine oil change
500 hours
Interval for hydraulic/transmission oil change
1,500 hours
Interval for engine coolant change
6,000 hours
LOADERS
Loader
700M
Lift capacity at full height
2417 kg/5304 lb
Maximum lift height
4741 mm/186 in.
PRECISION AG
Guidance
Integrated AutoTrac
Telematic
JDLink
Remote diagnostics
ServiceADVISOR Remote: available with JDLink hardware and activations/Remote Display Access: available with JDLink hardware and activations
MISCELLANEOUS
Country of manufacture
USA
ADDITIONAL INFORMATION
Date collected
10-Jul-2020
About John Deere Tractor
The 7R 230 type tractor is part of the John Deere 7R Series. The 7R 230 is a Row-Crop Tractors and is majorly used for Agriculture Tractors activities. The 7R 230 tractor features a 30 horsepower engine. This setup increases real-world efficiency.