Full Specifications
JOHN DEERE 3320 POWER
Engine
32.5hp / 24.2kW
PTO (claimed)
25hp / 18.6kW
ENGINE DETAIL
Description
Yanmar 3TNV88 diesel 3-cylinder liquid-cooled
Displacement
100.2ci / 1.6L
Bore/Stroke
3.46x3.54inches / 88x 90mm
Power
32.5hp / 24.2kW
Fuel system
direct injection
Compression
18.5:1
Rated RPM
2600
Torque
73.9lb-ft / 100.2Nm
Torque RPM
1560
Starter volts
12
Oil capacity
5.1qts / 4.8L
ROPS Coolant capacity
5.6qts / 5.3L
Cab Coolant capacity
7.4qts / 7.0L
JOHN DEERE 3320 ENGINE
Description
Yanmar 1.6L 3-cyl diesel
TRANSMISSIONS OVERVIEW
Description
12-speed partially synchronized with power shuttle hydrostatic
TRANSMISSION 1
Transmission
Power Reverser
Type
partially synchronized with power shuttle
Gears
12 forward and reverse
Clutch
112.5mm wet disc
Description
Standard transmission, not available with cab. Four speeds with three ranges and reverser lever. Speed changes are synchronized with clutch pedal. Tractor must be stopped, and clutch used, to shift range. Left-hand reverser may be used without clutching
SPEEDS 1
Description
With 11.2-24 rear tires
TRANSMISSION 2
Transmission
Sauer-Danfoss eHydro
Type
hydrostatic
Gears
infinite (3-range) forward and reverse
Description
Controlled by two foot pedals and range shift lever. Tractor must be stopped before shifting ranges. Cruise control standard. SpeedMatch allows maximum speed to be limited. MotionMatch allows acceleration rate to be set. LoadMatch allows engine RPMs to be set, tractor will adjust speed to maintain RPMs
SPEEDS 2
Description
With 11.2-24 rear tires
TRANSMISSION 3
Transmission
eHydro AutoHST
Type
hydrostatic
Gears
infinite (3-range) forward and reverse
Description
AutoHST provides an automobile-style control to the eHydro transmission. A single foot pedal controls engine RPMs and transmission speed, with a column-mounted shifter to select forward, neutral, or reverse
MECHANICAL
Chassis
4x4 MFWD 4WD
Steering
power
Brakes
wet disc
Cab
Two-post foldable ROPS. Cab optional
Transmissions
12-speed partially synchronized with power shuttle hydrostatic
CAPACITY
ROPS Fuel
13.5gal / 51.1L
Cab Fuel
11.8gal / 44.7L
Hydraulic system
6.8gal / 25.7L 6.3gal / 23.8L (with gear transmission)
HYDRAULICS
Type
open center
Capacity
6.8gal / 25.7L 6.3gal / 23.8L (with gear transmission)
Valves
5
Pump flow
8.6gpm / 32.6lpm
Total flow
13.9gpm / 52.6lpm
TRACTOR HITCH
Rear Type
I
Rear lift (at ends)
2,530lbs / 1147kg
POWER TAKE-OFF (PTO)
Rear PTO
independent
Rear RPM
540
Mid PTO
optional
Mid RPM
2100
JOHN DEERE 3320 TIRES
Ag front
7-14
Ag rear
11.2-24
Lawn/turf front
25x10.5LL-15
Lawn/turf rear
41x18LL-16.1
Industrial front
27x8.5-15
Industrial rear
43x16-20
DIMENSIONS
Wheelbase
68inches / 172cm
Length
120.2inches / 305cm
Width
52.4inches / 133cm *Minimum
ROPS Weight
2900lbs / 1315kg
Cab Weight
3570lbs / 1619kg
Rear tread
40.6/45.3/48.9/53.1/56.6inches / 103/115/124/134 / 143cm
JOHN DEERE 3320 HEIGHT
Hood
57inches / 144cm
ROPS
93.3inches / 236cm
Cab
89.4inches / 227cm
DIMENSIONS & TIRES
Wheelbase
68inches / 172cm
Weight
2900 to 3570 pounds
Front tire
7-14
Rear tire
11.2-24
ATTACHMENT OVERVIEW
Description
60
60
Type
mid-mount John Deere 3-blade
Cutting width
60inches / 152cm
JOHN DEERE 300X LOADER
Height (to pin)
90inches / 228cm
Clearance, dumped bucket
68.6inches / 174cm
Dump reach
30.4inches / 77cm
Dump angle
40°
Reach at ground
54.4inches / 138cm
Rollback at ground
21°
Rollback, raised
103°
Breakout force (at pin)
2855lbs / 1295kg
Breakout force (at 500mm)
2032lbs / 921kg
Lift to full height (at pin)
1360lbs / 616kg
Lift to full height (at 500mm)
999lbs / 453kg
Lift to 1.5m (at pin)
1700lbs / 771kg
Lift to 1.5m (at 500mm)
1312lbs / 595kg
Bucket width
61inches / 154cm
Attachment style
Deere quick-attach
Raise time to height
2.8 s
Bucket dump time
4.1 s
Lowering time
1.7 s
Rollback time
1.7 s
JOHN DEERE 300CX LOADER
Height (to pin)
102inches / 259cm
Clearance, dumped bucket
79.6inches / 202cm
Dump reach
22inches / 55cm
Dump angle
41.1°
Reach at ground
58.6inches / 148cm
Rollback at ground
31°
Rollback, raised
119°
Breakout force (at pin)
3327lbs / 1509kg
Breakout force (at 500mm)
2416lbs / 1095kg
Lift to full height (at pin)
1598lbs / 724kg
Lift to full height (at 500mm)
1122lbs / 508kg
Lift to 1.5m (at pin)
2125lbs / 963kg
Lift to 1.5m (at 500mm)
1649lbs / 747kg
Bucket width
61inches / 154cm
Attachment style
Deere quick-attach skid steer (optional)
Raise time to height
3.6 s
Bucket dump time
4.2 s
Lowering time
2.1 s
Rollback time
1.8 s
JOHN DEERE 47 BACKHOE
Backhoe type
John Deere 47 Backhoe
Weight
1047lbs / 474kg
2-Foot flat digging depth
90inches / 228cm
Reach from pivot
114inches / 289cm
Loading height
70inches / 177cm
Bucket Rotation
180
Swing Arc
180
Bucket force
2840lbs / 1288kg
Dipperstick force
2005lbs / 909kg
3320 SERIAL NUMBERS
2005
100001 (gear)
2006
240001 (gear)
2007
340001 (gear)
2008
427001 (gear)
2009
504001 (gear)
2010
604001 (gear)
2011
710001 (gear)
2012
810001 (gear)
2013
910001 (gear)
ELECTRICAL
Ground
negative
ROPS Charging amps
40
Cab Charging amps
75
Battery CCA
500
Battery volts
12
The 3320 model tractor belongs to the John Deere 3000 Twenty Series. The 3320 is a Compact Utility Tractors and is majorly used for Agriculture Tractors production. The 3320 tractor is powered by a engine. This configuration more usability in the real world.