AGCO DT160 Tractor (2004)
Manufacturer:AGCO
Price:N/A
Series:DT Series
Model:DT160
Equipment Type: Row-Crop Tractors
Factory:Beauvais, France
Full Specifications
OCED TRACTOR TEST 1781
- Description
- Diesel 18-speed 4WD/September 7 - 27, 2000/Link: OCED Tractor Test 1781 file/PTO performance/Drawbar performance/Gear 10 used for power test./Gear 3 used for pull test.
- Power at rated engine speed
- 164.38 hp/122.6 kW
- Fuel use
- 10.4 gal/hour/39.4 l/hour
- Power at rated PTO speed
- 168.30 hp/125.5 kW
- Max power
- 142.58 hp/106.3 kW
- Max pull
- 20,868 lbs/9465 kg
AGCO DT160 POWER
- PTO (claimed)
- 160 hp/119.3 kW
- Drawbar (tested)
- 142.58 hp/106.3 kW
- PTO (tested)
- 164.38 hp/122.6 kW
ENGINE DETAIL
- Description
- Cummins C8.3L/turbocharged diesel/6-cylinder/liquid-cooled
- Displacement
- 505 ci/8.3 L
- Bore/Stroke
- 4.488x5.315 inches/114 x 135 mm
- Air cleaner
- two paper elements
- Compression
- 17.3:1
- Rated RPM
- 2200
- Torque
- 538 lb-ft/729.5 Nm
- Torque RPM
- 1251
- Starter volts
- 12
AGCO DT160 ENGINE
- Description
- Cummins 8.3L 6-cyl diesel
- Fuel tank
- 120 gal/454.2 L
TRANSMISSION
- Type
- full power shift
- Gears
- 18 forward and 6 reverse
- Clutch
- electro-hydraulic wet disc
MECHANICAL
- Chassis
- 4x4 MFWD 4WD
- Steering
- power
- Brakes
- hydraulic wet disc
- Cab
- Cab standard.
- Transmission
- 18-speed full power shift
HYDRAULICS
- Type
- closed center pressure flow compensated (PFC)
- Pressure
- 2900 psi/200.0 bar
- Valves
- 4
- Pump flow
- 29 gpm/109.8 lpm/39 gpm/147.6 lpm
TRACTOR HITCH
- Rear Type
- 3/3N
- Rear lift (at 24"/610mm)
- 16,000 lbs/7257 kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540/1000
DIMENSIONS
- Wheelbase
- 121 inches/307 cm
- Length
- 203 inches/515 cm
- Width
- 98.2 inches/249 cm
- Height
- 121 inches/307 cm
- Shiping weight
- 18,500 lbs/8391 kg
DIMENSIONS & TIRES
- Wheelbase
- 121 inches/307 cm
- Weight
- 18,500 lbs/8391 kg
AGCO FL600 LOADER
- Height (to pin)
- 181 inches/459 cm
- Clearance, dumped bucket
- 152 inches/386 cm
- Dump reach
- 26 inches/66 cm
- Dump angle
- 47°
- Reach at ground
- 103 inches/261 cm
- Rollback angle
- 38°
- Breakout force (bucket)
- 6952 lbs/3153 kg
- Lift to full height (at pin)
- 7641 lbs/3465 kg
- Bucket width
- 96 inches/243 cm
- Raise time to height
- 6.1 s
- Bucket dump time
- 2.7 s
- Lowering time
- 4.4 s
- Rollback time
- 2.2 s
DT160 SERIAL NUMBERS
- 2002
- L001001
- 2003
- M001001
- 2004
- N001001
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Battery volts
- 12
About AGCO Tractor
The DT160 model tractor is part of AGCO's 9R line of tractors. The DT160 is classified as a Row-Crop Tractors and that is mostly used for Agriculture Tractors production. The DT160 tractor has a 164.38 horsepower engine. This setup provides real-world effectiveness.
