AGCO RT135 Tractor (2005)

Manufacturer:AGCO

Price:N/A

Series:RT Series

Model:RT135

Equipment Type: Row-Crop Tractors

Factory:Beauvais, France

Full Specifications

OCED TRACTOR TEST 1842 2

Description: Diesel CVT 4WD October 7 - 26, 2004 Link: OCED Tractor Test 1842 file PTO performance Drawbar performance Pull at 9 KPH Pull at 4 KPH
Max power: 108.36hp / 80.8kW
Fuel use: 9.5gal/hour / 36.0l/hour
Power at rated engine speed: 137.72hp / 102.7kW
Power at rated PTO speed: 142.03hp / 105.9kW
Max pull: 17,663lbs / 8011kg

AGCO RT135 POWER

PTO (claimed): 135hp / 100.7kW
Drawbar (tested): 108.36hp / 80.8kW
PTO (tested): 143.94hp / 107.3kW

ENGINE DETAIL

Description: Cummins/turbocharged diesel 6-cylinder liquid-cooled
Displacement: 408ci / 6.7L
Bore/Stroke: 4.094x5.179inches / 104x 132 mm
Emissions: Tier II
Air cleaner: dual paper elements
Pre-heating: grid heater
Compression: 17.5:1
Rated RPM: 2200
Torque: 531 lb-ft /720.0 Nm
Torque RPM: 1149
Starter volts: 12

AGCO RT135 ENGINE

Description: Cummins 6.7L 6-cyl diesel
Fuel tank: 100gal / 378.5L

TRANSMISSIONS OVERVIEW

Description: continuously variable transmission/32-speed partial power shift

TRANSMISSION 1

Transmission: PowerMaxx CVT
Type: continuously variable transmission
Gears: infinite (2-range) forward and reverse

TRANSMISSION 2

Transmission: QuadraShift
Type: partial power shift
Gears: 32 forward and reverse
Description: Four power shift gears in four ranges.

MECHANICAL

Chassis: 4x2 2WD/4x4 MFWD 4WD
Differential lock: electro-hydraulic front and rear
Steering: power
Brakes: hydraulic wet disc
Cab: Cab standard with optional automatic climate control.
Transmissions: continuously variable transmission/32-speed partial power shift

HYDRAULICS

Type: closed center pressure flow compensating (PFC)
Pressure: 2900psi / 200.0bar
Valves: 4 or 5
SCV flow: 29gpm / 109.8lpm

TRACTOR HITCH

Rear Type: II/IIIN
Control: electronic lower-link
Rear lift (at 24: 14,500lbs / 6577kg/12,500lbs / 5670kg (CVT)

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 540/1000
Front PTO: optional

DIMENSIONS

Wheelbase: 113.8inches / 289cm
Clearance (drawbar): 14inches / 35cm
Front tread: 61.2 to 89.2inches / 155to 226 cm
Rear tread: 60.5 to 120inches / 153to 304 cm

AGCO RT135 WEIGHT

Shipping: 14,440lbs / 6549kg (4WD Cab)/15,057lbs / 6829kg (4WD CVT Cab)
Operating: 15,525lbs / 7042kg (4WD CVT Cab)
Ballasted: 18,575lbs / 8425kg

DIMENSIONS & TIRES

Wheelbase: 113.8inches / 289cm
Weight: 14440 to 15525 pounds

AGCO FL600 LOADER

Height (to pin): 178inches / 452cm
Clearance, dumped bucket: 139inches / 353cm
Dump reach: 27inches / 68cm
Dump angle: 48°
Reach at ground: 103inches / 261cm
Rollback angle: 38°
Breakout force (bucket): 6952lbs / 3153kg
Lift to full height (at pin): 7641lbs / 3465kg
Bucket width: 96inches / 243cm
Raise time to height: 6.1 s
Bucket dump time: 2.7 s
Lowering time: 4.4 s
Rollback time: 2.2 s

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 120
Batteries: 2
Battery volts: 12

About AGCO Tractor

The AGCO RT135 type tractor is part of the RT Series of tractors. The RT135 is a kind of Row-Crop Tractors and that is often used for Agriculture Tractors activities. A engine runs the RT135 tractor. This setup offers a better usability in the actual world.