Allis Chalmers 6060 Tractor (1984)
Manufacturer:Allis Chalmers
Price:21,460(USD)
Series:6000 Series
Model:6060
Equipment Type: Row-Crop Tractors
Factory:West Allis, Wisconsin, USA
Full Specifications
NEBRASKA TRACTOR TEST 1397 2
- Description
- Diesel 8-speed 2WD June 9 - 22, 1981 Link: Nebraska Tractor Test 1397 file PTO performance Drawbar performance Gear 1-H used for power test Gear 2-L used for pull test
- Power at rated engine speed
- 63.83hp / 47.6kW
- Fuel use
- 3.8gal/hour / 14.4l/hour
- Power at rated PTO speed
- 64.90hp / 48.4kW
- Max power
- 50.87hp / 37.9kW
- Max pull
- 6,846lbs / 3105kg
ALLIS CHALMERS 6060 POWER
- Drawbar (tested)
- 50.87hp / 37.9kW
- PTO (tested)
- 63.83hp / 47.6kW
ENGINE DETAIL
- Description
- Allis Chalmers 433T turbocharged diesel 4-cylinder liquid-cooled
- Displacement
- 200ci / 3.3L
- Bore/Stroke
- 3.876x4.250inches / 98x 108 mm
- Air cleaner
- paper element with pre-cleander
- Compression
- 14.1:1
- Rated RPM
- 2300
- Starter volts
- 12
- Oil capacity
- 10qts / 9.5L
- Coolant capacity
- 17qts / 16.1L
ALLIS CHALMERS 6060 ENGINE
- Description
- Allis Chalmers 3.3L 4-cyl diesel
TRANSMISSION
- Type
- partially synchronized
- Gears
- 8 forward and 2 reverse
- Oil capacity
- 12qts / 11.4L
- Description
- Two ranges with four gears in each range. Synchronized shifting between top two gears (3-4 and 7-8) in each range.
SPEEDS
- Description
- With 15.5-38 rear tires
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD (optional)
- Steering
- hydrostatic power
- Brakes
- differential hydraulic wet disc
- Cab
- Four-post ROPS canopy. Cab and air-conditioning optional.
- Transmission
- 8-speed partially synchronized
CAPACITY
- Fuel
- 32gal / 121.1L
- Rear diff.
- 37qts / 35.0L
HYDRAULICS
- Type
- open center
- Valves
- 2
- Pump flow
- 11.4gpm / 43.1lpm
- Total flow
- 19gpm / 71.9lpm
TRACTOR HITCH
- Rear Type
- II
- Rear lift (at 24
- 3,500lbs / 1587kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540
ALLIS CHALMERS 6060 TIRES
- Ag front
- 7.50-16 (2WD)/11.2-24 (4WD)
- Ag rear
- 16.9-28 (2WD)/18.4-28 (4WD)
DIMENSIONS
- Wheelbase
- 93inches / 236cm (2WD)/91.9inches / 233cm (4WD)
- Length
- 146.5inches / 372cm
- Width
- 68.5inches / 173cm
- Ground clearance
- 18.1inches / 45cm (4WD front axle)/20.4inches / 51cm (2WD front axle)/26.7inches / 67cm (rear axle)
ALLIS CHALMERS 6060 WEIGHT
- Shipping
- 6,100lbs / 2766kg (2WD ROPS)
- Operating
- 6,465lbs / 2932kg (2WD ROPS)
- Ballasted
- 8,945lbs / 4057kg
ALLIS CHALMERS 6060 HEIGHT
- Hood
- 69.4inches / 176cm
- ROPS
- 107.7inches / 273cm
- Cab
- 103.2inches / 262cm
- Exhaust
- 110.2inches / 279cm
DIMENSIONS & TIRES
- Wheelbase
- 93inches / 236cm (2WD)/91.9inches / 233cm (4WD)
- Weight
- 6100 to 6465 pounds
- Front tire
- 7.50-16
- Rear tire
- 16.9-28
6060 SERIAL NUMBERS
- Location
- Right side of engine adapter flange
- 1980
- 1001
- 1981
- 1297
- 1982
- 2463
- 1983
- 3894
- 1984
- 4572
- Final
- 5027
ELECTRICAL
- Charging system
- alternator
- Charging amps
- 72
- Batteries
- 1/2 (optional)
- Battery volts
- 12
About Allis Chalmers Tractor
The Allis Chalmers 6060 tractor is part of the 6000 Series. The 6060 is a type of Row-Crop Tractors and which is mostly used for Agriculture Tractors activities. A engine runs the 6060 tractor. This setup offers a better usability in the actual world.
