CaseIH 4994 Tractor (1987)
Manufacturer:CaseIH
Price:130,000(USD)
Series:4WD 94 Series
Model:4994
Equipment Type: Four-wheel Drive 4WD Tractors
Factory:Racine, Wisconsin, USA
Full Specifications
NEBRASKA TRACTOR TEST 1530 2
- Description
- Diesel 12-speed 4WD June 9 - 27, 1984 Link: Nebraska Tractor Test 1530 file PTO performance Drawbar performance Gear 6 used for power test Gear 2 used for pull test
- Power at rated engine speed
- 344hp / 256.5kW
- Fuel use
- 20.1gal/hour / 76.1l/hour
- Max power
- 294.24hp / 219.4kW
- Max pull
- 34,519lbs / 15657kg
CASEIH 4994 POWER
- Engine
- 400hp / 298.3kW
- PTO (claimed)
- 344hp / 256.5kW
- Drawbar (tested)
- 294.24hp / 219.4kW
- PTO (tested)
- 344hp / 256.5kW
ENGINE DETAIL
- Description
- Saab-Scania turbocharged diesel 8-cylinder liquid-cooled
- Displacement
- 866ci / 14.2L
- Bore/Stroke
- 5.00x5.51inches / 127x 140mm
- Power
- 400hp / 298.3kW
- Air cleaner
- dual paper elements
- Compression
- 15.5:1
- Rated RPM
- 2100
- Torque
- 1140lb-ft / 1545.8Nm
- Torque RPM
- 1300
- Firing order
- 1-5-4-2-6-3-7-8
- Starter volts
- 12
- Coolant capacity
- 88qts / 83.3L
- Intake valve clearance
- 0.018inches / 0.457mm
- Exhaust valve clearance
- 0.031inches / 0.787mm
ENGINE OIL
- Oil capacity
- 27qts / 25.6L
CASEIH 4994 ENGINE
- Description
- Saab-Scania 14.2L 8-cyl diesel
TRANSMISSION
- Type
- full power shift
- Gears
- 12 forward and 2 reverse
- Clutch
- hydraulic wet disc
- Oil capacity
- 63qts / 59.6L 59qts / 55.8L (without PTO) Case Powergard PTF
- Description
- Electronically-controlled Case power shift transmission operated with single control lever and inching pedal. The inching pedal must be depressed to move from park/neutral into first gear. Tractor must be moving in first gear before higher gears can be selected. Gear changes made by pushing control lever into upshift or downshift position. Control lever can be held in upshift/downshift position for multiple gear changes
SPEEDS
- Description
- With 20.5-32 tires
MECHANICAL
- Chassis
- 4x4 4WD
- Steering
- hydraulic, front, rear or four-wheel crab steering
- Brakes
- hydraulic dual caliper disc
- Cab
- Silent Guardian cab standard
- Transmission
- 12-speed full power shift
CAPACITY
- Fuel
- 300gal / 1135.5L
- Hydraulic system
- 26.5gal / 100.3L
- Front hubs
- 13.5qts / 12.8L (each)
- Front diff.
- 17qts / 16.1L
- Rear hubs
- 13.5qts / 12.8L (each)
- Rear diff.
- 22.5qts / 21.3L
HYDRAULICS
- Type
- closed center
- Capacity
- 26.5gal / 100.3L
- Pressure
- 2000psi / 137.9bar
- Valves
- 4
- Total flow
- 35gpm / 132.5lpm
- Steering flow
- 20gpm / 75.7lpm
- Steering press.
- 2000psi / 137.9bar
POWER TAKE-OFF (PTO)
- Rear PTO
- independent (optional)
- Rear RPM
- 1000
- Engine RPM
- 1000@2100
CASEIH 4994 TIRES
- Ag front
- 20.8-38
- Ag rear
- 20.8-38/20.8-42/23.1-34/30.5-32
DIMENSIONS
- Wheelbase
- 124.8inches / 316cm
- Length
- 261.8inches / 664cm
- Width
- 117inches / 297cm (minimum) 156inches / 396cm (duals)
- Height (exhaust)
- 138.5inches / 351cm
- Clearance (drawbar)
- 14.5inches / 36cm
CASEIH 4994 WEIGHT
- Shipping
- 26,500lbs / 12020kg
- Operating
- 31,315lbs / 14204kg
- Ballasted
- 39,930lbs / 18112kg
- Max capacity
- 40,000lbs / 18144kg
DIMENSIONS & TIRES
- Wheelbase
- 124.8inches / 316cm
- Weight
- 26500 to 31315 pounds
- Front tire
- 24.5-32
- Rear tire
- 24.5-32
4994 SERIAL NUMBERS
- Location
- Data plates located at forward-right corner in top of the tractor cab
- 1984
- 8865000 (JI Case)
- 1985
- 8866200
- 1986
- 8866971
- 1987
- 8867559
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 105
- Batteries
- 2
- Battery volts
- 12
- Battery AH
- 300
- Battery Group
- 30H
About CaseIH Tractor
The CaseIH 4994 tractor is part of the company's 4WD 94 Series. The 4994 is a type of Four-wheel Drive 4WD Tractors and that is primarily used for Agriculture Tractors production. A engine powers the 4994 tractor. This setup improves usability in the real world scenario.
