Full Specifications
OCED TRACTOR TEST 2204 2
Description
Diesel 16-speed 4WD June 1 - August 1, 2004 Link: OCED Tractor Test 2204 file PTO performance Drawbar performance Gear 1C used for power test Gear 3A used for pull test
Max power
94.4hp / 70.4kW
Fuel use
7.0gal/hour / 26.5l/hour
Power at rated engine speed
114.5hp / 85.4kW
Power at rated PTO speed
120.1hp / 89.6kW
Max pull
11,755lbs / 5332kg
CASEIH MXU135 POWER
Engine (gross)
135hp / 100.7kW
PTO (claimed)
115hp / 85.8kW
Drawbar (tested)
94.4hp / 70.4kW
PTO (tested)
127.4hp / 95.0kW
ENGINE DETAIL
Description
CNH turbocharged intercooled diesel 6-cylinder liquid-cooled
Displacement
410.6ci / 6.7L
Bore/Stroke
4.094x5.196inches / 104x 132mm
Power (gross)
135hp / 100.7kW
Fuel system
Bosch electronic direct injection with 8-hole injectors
Air cleaner
dual paper elements
Pre-heating
grid heater
Compression
17.0:1
Rated RPM
2200
Starter volts
12
CASEIH MXU135 ENGINE
Description
CNH 6.7L 6-cyl diesel
Fuel tank
67gal / 253.6L
TRANSMISSIONS OVERVIEW
Description
24-speed partial power shift 16-speed partial powershift
TRANSMISSION 1
Type
partial power shift
Gears
24 forward and reverse
Clutch
electro-hydraulic wet discs
Description
Four gears (1-4) in three ranges (I-II-III) with low-high power shift. Gears and ranges are synchronized
TRANSMISSION 2
Type
partial powershift
Gears
16 forward and reverse
Clutch
electro-hydraulic wet discs
Description
Four gears (1-4) in four ranges (A-D). Power shift between gears. Auto Shift feature automatically matches shifts within selected range to match load
MECHANICAL
Chassis
4x2 2WD/4x4 MFWD 4WD
Final drives
planetary inboard
Differential lock
electro-hydraulic rear standard front optional
Steering
power
Brakes
differential hydraulic wet disc
Cab
Cab standard.
Transmissions
24-speed partial power shift 16-speed partial powershift
HYDRAULICS
Type
pressure-flow compensated (PFC)
Pressure
3118psi / 215.0bar
Rear valves
2 to 4
Pump flow
26.5gpm / 100.3lpm
Total flow
37gpm / 140.0lpm
Steering flow
10.5gpm / 39.7lpm
TRACTOR HITCH
Rear Type
II/IIIN
Control
electronic draft control
Rear lift
12,185lbs / 5527kg
POWER TAKE-OFF (PTO)
Rear PTO
independent
Clutch
electro-hydraulic wet plates
Rear RPM
540/1000
Engine RPM
540@1969 / 1000@2120
CASEIH MXU135 TIRES
2WD Standard tires (ag)
Front: 10.00x16. Rear: 18.4R38
4WD Standard tires (ag)
Front: 14.9R28. Rear: 18.4R38
DIMENSIONS
2WD Wheelbase
104.4inches / 265cm
4WD Wheelbase
104.7inches / 265cm
CASEIH MXU135 WEIGHT
2WD Shipping
10,979lbs / 4980kg
4WD Shipping
11,331lbs / 5139kg
4WD Operating
12,020lbs / 5452kg
CASEIH MXU135 HEIGHT
Cab
114.1inches / 289cm 116.7inches / 296cm (suspended cab)
Exhaust
114.9inches / 291cm
DIMENSIONS & TIRES
2WD Wheelbase
104.4inches / 265cm
4WD Wheelbase
104.7inches / 265cm
Weight
10979 to 12020 pounds
Front tire
10.00x16
2WD Rear tire
18.4R38
CASEIH LX156 LOADER
Loader weight
1,500lbs / 680kg 1,700lbs / 771kg (mechanical self-leveling)
Height (to pin)
146inches / 370cm
Clearance, dumped bucket
109inches / 276cm
Dump reach
55inches / 139cm
Dump angle
55°
Reach at ground
103inches / 261cm
Rollback angle
40°
Breakout force (at 800mm)
4,800lbs / 2177kg 5,300lbs / 2404kg (PFC)
Lift to full height (at 800mm)
3,500lbs / 1587kg 3,800lbs / 1723kg (PFC)
Raise time to height
4.6 s
Bucket dump time
3.7 s
Lowering time
3.0 s
Rollback time
2.8 s
ELECTRICAL
Ground
negative
Charging system
alternator
Charging amps
120
Battery CCA
1300
Battery volts
12
The MXU135 model tractor belongs to the CaseIH MXU Maxxum Series. The MXU135 is a Utility Tractors type, that is used most often in Agriculture Tractors. A engine powers the MXU135 tractor. This setup is more practical in the real world.