Full Specifications
OCED TRACTOR TEST 2010 2
Description
Diesel 16-speed 4WD November 15 - 29, 2011 Link: OCED Tractor Test 2010 file PTO performance Drawbar performance Gear 5 used for power test. Gear 2 used for pull test.
Max power
411.08hp / 306.5kW
Fuel use
24.9gal/hour / 94.2l/hour
Power at rated engine speed
456.09hp / 340.1kW
Power at rated PTO speed
488.61hp / 364.4kW
Max pull
46670lbs / 21169kg
CASEIH STEIGER 500 POWER
Engine
500hp / 372.9kW
Drawbar (tested)
411.08hp / 306.5kW
PTO (tested)
508.03hp / 378.8kW
ENGINE DETAIL
Description
Iveco wastegate turbocharged aftercooled diesel 6-cylinder 24-valve liquid-cooled
Displacement
787ci / 12.9L
Bore/Stroke
5.315x5.906inches / 135x 150 mm
Emissions
Interim Tier 4
Emission control
selective catalytic reduction (SCR)
Power
500hp / 372.9kW
Maximum Power
550hp / 410.1kW
Rated RPM
2100
Starter type
electric
CASEIH STEIGER 500 ENGINE
Description
Iveco 12.9L 6-cyl diesel
Fuel tank
310gal / 1173.4L
Exhaust fluid (DEF)
62gal / 234.7L
TRANSMISSION
Type
full power shift
Gears
16 forward and 2 reverse
Clutch
electro-hydraulic wet discs
MECHANICAL
Chassis
4x4 articulated 4WD
Cab
Surveyor cab standard.
Transmission
16-speed full power shift
HYDRAULICS
Type
pressure flow compensating (PFC)
Rear valves
4 to 8
Pump flow
35gpm / 132.5lpm
Total flow
42gpm / 159.0lpm/56gpm / 212.0lpm (High Flow)/113gpm / 427.7lpm (Twin Flow)
TRACTOR HITCH
Rear Type
4N
Rear lift
19,620lbs / 8899kg
POWER TAKE-OFF (PTO)
Rear PTO
independent
Rear RPM
1000 (1-3/4)
DIMENSIONS
Wheelbase
154inches / 391cm
Weight
39,492lbs / 17913kg (dual 710/70R42)
Ballasted weight
56,000lbs / 25401kg
Rear axle
4.5 by 120inches / 114by 3048 mm
DIMENSIONS & TIRES
Wheelbase
154inches / 391cm
Weight
39,492lbs / 17913kg
STEIGER 500 SERIAL NUMBERS
Location
Serial number plate on the front left tractor fender, near the steps.
ELECTRICAL
Ground
negative
Charging system
alternator
Charging amps
200
Batteries
2
Battery CCA
1000
Battery volts
12