Challenger MT285 Tractor (2005)
Manufacturer:Challenger
Price:N/A
Series:MT200 Series
Model:MT285
Equipment Type: Compact Utility Tractors
Factory:Matsuyama, Japan
Full Specifications
CHALLENGER MT285 POWER
- Engine (gross)
- 40.1hp / 29.9kW
- Gear PTO (claimed)
- 32.4hp / 24.2kW
- Hydro PTO (claimed)
- 31.7hp / 23.6kW
ENGINE DETAIL
- Description
- Iseki turbocharged diesel 3-cylinder liquid-cooled
- Displacement
- 91.4ci / 1.5L
- Bore/Stroke
- 3.43x3.30inches / 87x 84 mm
- Power (gross)
- 40.1hp / 29.9kW
- Rated RPM
- 2600
- Starter
- electric
- Starter volts
- 12
CHALLENGER MT285 ENGINE
- Description
- Iseki 1.5L 3-cyl diesel
- Fuel tank
- 7.9gal / 29.9L
TRANSMISSIONS OVERVIEW
- Description
- 16-speed power shuttle hydrostatic
TRANSMISSION 1
- Type
- power shuttle
- Gears
- 16 forward and reverse
- Description
- Four synchronized gears (1-4) in four ranges with power shuttle.
TRANSMISSION 2
- Type
- hydrostatic
- Gears
- infinite (3-range) forward and reverse
MECHANICAL
- Chassis
- 4x4 MFWD 4WD
- Differential lock
- mechanical rear
- Steering
- power
- Brakes
- wet disc
- Cab
- Two-post folding ROPS
- Transmissions
- 16-speed power shuttle/hydrostatic
HYDRAULICS
- Type
- open center
- Pressure
- 2130psi / 146.9bar
- Pump flow
- 7.7gpm / 29.1lpm
- Total flow
- 12.2gpm / 46.2lpm (gear)/9.6gpm / 36.3lpm (hydro)
- Steering flow
- 4.5gpm / 17.0lpm
TRACTOR HITCH
- Rear Type
- I
- Control
- position control/draft control
- Rear lift (at ends)
- 2,755lbs / 1249kg (gear)/2,866lbs / 1300kg (hydro)
- Rear lift (at 24
- 2,100lbs / 952kg (gear)/1,940lbs / 879kg (hydro)
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Clutch
- wet disc
- Rear RPM
- 540 (1.375)
- Mid PTO
- independent
- Mid RPM
- 2000
CHALLENGER MT285 TIRES
- Standard tires (ag)
- Front: 8-16. Rear: 13.6-24
- Lawn/turf front
- 305R343
- Lawn/turf rear
- 610R470
- Industrial front
- 10-16.5
- Industrial rear
- 14.9-24
DIMENSIONS
- Wheelbase
- 68.5inches / 173cm
- Length
- 121.5inches / 308cm
- Width
- 60.6inches / 153cm
- Height (ROPS)
- 93.2inches / 236cm
- Weight
- 3,174lbs / 1439kg
- Front tread
- 44inches / 111cm
- Rear tread
- 45 to 56.8inches / 114to 144 cm
DIMENSIONS & TIRES
- Wheelbase
- 68.5inches / 173cm
- Weight
- 3,174lbs / 1439kg
- Front tire
- 8-16
- Rear tire
- 13.6-24
ATTACHMENT OVERVIEW
- Description
- 72
72
- Type
- mid-mount Challenger MG716/3-blade
- Cutting width
- 72inches / 182cm
BLADE
- Type
- front-mount Challenger MDZ66
- Width
- 66inches / 167cm
63
- Type
- front-mount Challenger MSB63
- Clearing width
- 63inches / 160cm
CHALLENGER ML30 LOADER
- Height (to pin)
- 98inches / 248cm
- Clearance, dumped bucket
- 80inches / 203cm
- Dump reach
- 22.5inches / 57cm
- Dump angle
- 30°
- Rollback angle
- 16°
- Lift to full height (at 500mm)
- 1050lbs / 476kg
CHALLENGER MH20 BACKHOE
- Backhoe type
- Challenger MH20 Backhoe
- Transport height
- 72.8inches / 184cm
- Bucket width
- 10inches / 25cm/12inches / 30cm/16inches / 40cm/24inches / 60cm/37inches / 93cm
- 2-Foot flat digging depth
- 96inches / 243cm
- Reach from pivot
- 112.2inches / 284cm
- Bucket Rotation
- 165
- Swing Arc
- 180
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Battery volts
- 12
About Challenger Tractor
The MT285 tractor is part of the Challenger's MT200 Series. The MT285 is a Compact Utility Tractors type, that is used most often in Agriculture Tractors. A engine runs the MT285 tractor. This setup more applicability in the real world.
Compact Utility Tractors
