Challenger MT265B Tractor (2008)

Manufacturer:Challenger

Price:N/A

Series:MT200B Series

Model:MT265B

Equipment Type: Compact Utility Tractors

Factory:Matsuyama, Japan

Full Specifications

CHALLENGER MT265B POWER

Engine (gross): 33.0hp / 24.6kW
Engine (net): 32hp / 23.9kW
Gear PTO (claimed): 26.0hp / 19.4kW
Hydro PTO (claimed): 24.5hp / 18.3kW

ENGINE DETAIL

Description: Iseki E3CD-VB40 diesel 3-cylinder liquid-cooled
Displacement: 91.4ci / 1.5L
Bore/Stroke: 3.43x3.30inches / 87x 84 mm
Power (gross): 33.0hp / 24.6kW
Fuel system: indirect injection
Air cleaner: dual-stage dry
Pre-heating: glow plugs
Compression: 21.7:1
Rated RPM: 2600
Idle RPM: 980-2860
Starter volts: 12
Oil capacity: 5 qts /4.7 L
Coolant capacity: 7.1qts / 6.7L

CHALLENGER MT265B ENGINE

Description: Iseki 1.5L 3-cyl diesel
Fuel tank: 10.6gal / 40.1L

TRANSMISSIONS OVERVIEW

Description: hydrostatic 8-speed 12-speed partially synchronized with power shuttle

TRANSMISSION 1

Type: hydrostatic
Gears: infinite (3-range) forward and reverse
Oil capacity: 32.8qts / 31.0L

SPEEDS 1

Description: With 12.4-24 R1 rear tires

TRANSMISSION 2

Transmission: SynchroShuttle
Gears: 8 forward and reverse
Clutch: mechanical dry disc
Oil capacity: 32.8qts / 31.0L
Description: Four non-synchronized gears in two non-synchronized ranges, with synchronized shuttle shift.

SPEEDS 2

Description: With 12.4-24 R1 rear tires

TRANSMISSION 3

Transmission: PowerShuttle
Type: partially synchronized with power shuttle
Gears: 12 forward and reverse
Clutch: dry main, wet shuttle
Oil capacity: 32.8qts / 31.0L
Description: Three ranges with four gears each. Transmission can be shifted from forward to reverse on the go, without the clutch. In-range gear changes can be made on the go with the clutch.

SPEEDS 3

Description: With 12.4-24 R1 rear tires

MECHANICAL

Chassis: 4x4 MFWD 4WD
Final drives: spur gear
Differential lock: mechanical rear
Steering: power
Brakes: wet disc
Cab: Two-post foldable ROPS
Transmissions: hydrostatic 8-speed 12-speed partially synchronized with power shuttle

HYDRAULICS

Type: open center
Pressure: 2276psi / 156.9bar
Rear valves: 2
Mid valves: 2
Pump flow: 8.3gpm / 31.4lpm
Total flow: 12.7gpm / 48.1lpm (sync shuttle)/13.7gpm / 51.9lpm (power shuttle/hydro)
Steering flow: 4.4gpm / 16.7lpm (sync shuttle)/5.4gpm / 20.4lpm (power shuttle/hydro)
Steering press.: 2276psi / 156.9bar

TRACTOR HITCH

Rear Type: I
Control: position and response control/optional top-link draft control
Rear lift (at ends): 2800lbs / 1270kg
Rear lift (at 24: 2535lbs / 1149kg
Rear Arms: fixed link ends ((sync shuttle)/telescopic link ends (power shuttle/hydro)

POWER TAKE-OFF (PTO)

Rear PTO: independent
Clutch: electro-hydraulic wet disc
Rear RPM: 540 (1.375)
Mid PTO: independent
Mid RPM: 2000 (1.00)

CHALLENGER MT265B TIRES

Ag front: 8-16
Ag rear: 12.4-24/13.6-24
Lawn/turf front: 27x8.50-15
Lawn/turf rear: 41x14.00-20
Industrial front: 10-16.5
Industrial rear: 14.9-24

DIMENSIONS

Wheelbase: 69.7inches / 177cm
Length: 121inches / 307cm
Width: 62.2inches / 157cm *Minimum width
Height (ROPS): 87.4inches / 221cm
Ground clearance: 14.1inches / 35cm
Front tread: 45inches / 114cm
Rear tread: 46.5 to 58.9inches / 118to 149 cm

CHALLENGER MT265B WEIGHT

: 3136lbs / 1422kg
Max capacity: 6614lbs / 3000kg
Max front axle: 3968lbs / 1799kg
Max rear axle: 6968lbs / 3160kg

DIMENSIONS & TIRES

Wheelbase: 69.7inches / 177cm
Weight: 3136lbs / 1422kg
Front tire: 8-16
Rear tire: 12.4-24

ATTACHMENT OVERVIEW

Description: Front-end loader/Backhoe

CHALLENGER ML30B LOADER

Height (to pin): 102inches / 259cm
Clearance, dumped bucket: 80inches / 203cm
Dump reach: 15inches / 38cm
Dump angle: 47°
Reach at ground: 58inches / 147cm
Rollback angle: 30°
Breakout force (at pin): 2720lbs / 1233kg
Lift to full height (at pin): 1632lbs / 740kg
Lift to full height (at 500mm): 1112lbs / 504kg
Lift to 1.5m (at 500mm): 1485lbs / 673kg
Bucket width: 66inches / 167cm
Raise time to height: 3.5 s
Bucket dump time: 3.1 s
Lowering time: 2.1 s
Rollback time: 1.9 s

CHALLENGER MH20B BACKHOE

Backhoe type: Challenger MH20B Backhoe
Transport height: 75inches / 190cm
Bucket width: 10inches / 25cm/12inches / 30cm/16inches / 40cm/24inches / 60cm/37inches / 93cm
Digging depth: 90inches / 228cm
Reach from pivot: 112inches / 284cm
Bucket Rotation: 165
Swing Arc: 180
Bucket force: 3250lbs / 1474kg
Dipperstick force: 1900lbs / 861kg

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 40
Battery CCA: 630
Battery volts: 12

About Challenger Tractor

The MT265B model tractor is one of Challenger's 9R line of tractors. The MT265B is classified as a Compact Utility Tractors and is majorly used for Agriculture Tractors production. The MT265B tractor has a engine. This setting improves usability in the real world situation.