Challenger MT295 Tractor (2005)
Manufacturer:Challenger
Price:N/A
Series:MT200 Series
Model:MT295
Equipment Type: Compact Utility Tractors
Factory:Matsuyama, Japan
Full Specifications
CHALLENGER MT295 POWER
- Engine (gross)
- 44.2hp / 33.0kW
- Gear PTO (claimed)
- 37.0hp / 27.6kW
- Hydro PTO (claimed)
- 36hp / 26.8kW
ENGINE DETAIL
- Description
- Iseki diesel 4-cylinder liquid-cooled
- Displacement
- 134.1ci / 2.2L
- Bore/Stroke
- 3.43x3.64inches / 87x 92 mm
- Power (gross)
- 44.2hp / 33.0kW
- Rated RPM
- 2500
- Starter
- electric
- Starter volts
- 12
CHALLENGER MT295 ENGINE
- Description
- Iseki 2.2L 4-cyl diesel
- Fuel tank
- 12.7gal / 48.1L
TRANSMISSIONS OVERVIEW
- Description
- 16-speed power shuttle hydrostatic
TRANSMISSION 1
- Type
- power shuttle
- Gears
- 16 forward and reverse
- Description
- Four synchronized gears (1-4) in four ranges with power shuttle.
TRANSMISSION 2
- Type
- hydrostatic
- Gears
- infinite (4-range) forward and reverse
MECHANICAL
- Chassis
- 4x4 MFWD 4WD
- Differential lock
- mechanical rear
- Steering
- power
- Brakes
- wet disc
- Cab
- Two-post folding ROPS
- Transmissions
- 16-speed power shuttle/hydrostatic
HYDRAULICS
- Type
- open center
- Pressure
- 2275psi / 156.9bar
- Pump flow
- 7.4gpm / 28.0lpm
- Total flow
- 12.6gpm / 47.7lpm
- Steering flow
- 5.2gpm / 19.7lpm
TRACTOR HITCH
- Rear Type
- I
- Control
- position and draft control
- Rear lift (at ends)
- 3086lbs / 1399kg
- Rear lift (at 24
- 2600lbs / 1179kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Clutch
- wet disc
- Rear RPM
- 540 (1.375)
- Mid PTO
- independent, available only with hydrostatic transmission.
- Mid RPM
- 2000
CHALLENGER MT295 TIRES
- Standard tires (ag)
- Front: 9.5-16. Rear: 13.6-28
- Lawn/turf front
- 27x12LL-15
- Lawn/turf rear
- 570-648
- Industrial front
- 10-16.5
- Industrial rear
- 17.5-24
DIMENSIONS
- Wheelbase
- 76inches / 193cm
- Length
- 140.9inches / 357cm
- Width
- 71.5inches / 181cm
- Height (ROPS)
- 95.9inches / 243cm
- Gear Weight
- 4277lbs / 1940kg
- Hydro Weight
- 4331lbs / 1964kg
- Front tread
- 52.5inches / 133cm
- Rear tread
- 52 to 60inches / 132to 152 cm
DIMENSIONS & TIRES
- Wheelbase
- 76inches / 193cm
- Weight
- 4277 to 4331 pounds
- Front tire
- 9.5-16
- Rear tire
- 13.6-28
ATTACHMENT OVERVIEW
- Description
- Front-end loader/Backhoe
CHALLENGER ML40 LOADER
- Height (to pin)
- 99.75inches / 253cm
- Clearance, dumped bucket
- 80.5inches / 204cm
- Dump reach
- 37inches / 93cm
- Dump angle
- 43°
- Rollback angle
- 15°
- Lift to full height (at 500mm)
- 1600lbs / 725kg
CHALLENGER MH20 BACKHOE
- Backhoe type
- Challenger MH20 Backhoe
- Transport height
- 72.8inches / 184cm
- Bucket width
- 10inches / 25cm/12inches / 30cm/16inches / 40cm/24inches / 60cm/37inches / 93cm
- 2-Foot flat digging depth
- 96inches / 243cm
- Reach from pivot
- 112.2inches / 284cm
- Bucket Rotation
- 165
- Swing Arc
- 180
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Battery volts
- 12
About Challenger Tractor
The Challenger MT295 tractor is part of the MT200 Series. The MT295 is a Compact Utility Tractors type, that is used often in Agriculture Tractors. A engine powers the MT295 tractor. This configuration more usefulness in the actual world.
Compact Utility Tractors
