Challenger MT295B Tractor (2008)
Manufacturer:Challenger
Price:25,000(USD)
Series:MT200B Series
Model:MT295B
Equipment Type: Compact Utility Tractors
Factory:Matsuyama, Japan
Full Specifications
CHALLENGER MT295B POWER
- Engine (gross)
- 52.1hp / 38.9kW
- Engine (net)
- 50hp / 37.3kW
- PTO (claimed)
- 41hp / 30.6kW
ENGINE DETAIL
- Description
- Iseki E4DD diesel 4-cylinder liquid-cooled
- Displacement
- 180.3ci / 3.0L
- Bore/Stroke
- 3.82x3.94inches / 97x 100 mm
- Power (gross)
- 52.1hp / 38.9kW
- Fuel system
- indirect injection
- Air cleaner
- dual-stage dry
- Pre-heating
- glow plugs
- Compression
- 21.5:1
- Rated RPM
- 2600
- Idle RPM
- 975-2750
- Starter volts
- 12
- Oil capacity
- 8.5qts / 8.0L
- Coolant capacity
- 8 qts /7.6 L
CHALLENGER MT295B ENGINE
- Description
- Iseki 3.0L 4-cyl diesel
TRANSMISSIONS OVERVIEW
- Description
- 8-speed/12-speed partially synchronized/12-speed partial power shift
TRANSMISSION 1
- Transmission
- SynchroShuttle
- Gears
- 8 forward and reverse
- Clutch
- dry
- Oil capacity
- 40.2qts / 38.0L
- Description
- Four non-synchronized gears in two non-synchronized ranges, with synchronized shuttle shift.
SPEEDS 1
- Description
- With 16.9x24 R1 rear tires
TRANSMISSION 2
- Transmission
- PowerShuttle
- Type
- partially synchronized
- Gears
- 12 forward and reverse
- Clutch
- dry main, wet shuttle
- Oil capacity
- 40.2qts / 38.0L
- Description
- Three ranges with four gears each. Transmission can be shifted from forward to reverse on the go, without the clutch. In-range gear changes can be made on the go with the clutch.
SPEEDS 2
- Description
- With 16.9-24 R1 rear tires
TRANSMISSION 3
- Transmission
- AutoPower IV
- Type
- partial power shift
- Gears
- 12 forward and reverse
- Clutch
- mechanical wet disc
- Oil capacity
- 40.2qts / 38.0L
- Description
- Four push-button power shift gears in three non-synchronized ranges. Power shuttle shifting with left-hand console lever. Only available on the MT295B with a cab.
SPEEDS 3
- Description
- With 16.9-24 R1 rear tires
MECHANICAL
- Chassis
- 4x4 MFWD 4WD
- Final drives
- spur gear
- Differential lock
- mechanical rear
- Steering
- power
- Brakes
- wet disc
- Cab
- Two-post foldable ROPS. Cab optional with air-conditioning.
- Transmissions
- 8-speed/12-speed partially synchronized/12-speed partial power shift
CAPACITY
- Fuel
- 13.2gal / 50.0L
- Hydraulic system
- 10gal / 37.9L
HYDRAULICS
- Type
- open center
- Capacity
- 10gal / 37.9L
- Pressure
- 2276psi / 156.9bar
- Rear valves
- 2
- Mid valves
- 2
- Pump flow
- 11.4gpm / 43.1lpm
- Total flow
- 16.2gpm / 61.3lpm (sync shuttle)/17.3gpm / 65.5lpm (power shuttle/AutoPower)
- Steering flow
- 4.8gpm / 18.2lpm (sync shuttle)/5.9gpm / 22.3lpm (power shuttle/AutoPower)
- Steering press.
- 2276psi / 156.9bar
TRACTOR HITCH
- Rear Type
- I
- Control
- position and response control/optional top-link draft control
- Rear lift (at ends)
- 3483lbs / 1579kg
- Rear lift (at 24
- 3086lbs / 1399kg
- Rear Arms
- telescopic link ends
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Clutch
- electro-hydraulic wet disc
- Rear RPM
- 540
CHALLENGER MT295B TIRES
- Ag front
- 9.5-16
- Ag rear
- 16.9-24
- Lawn/turf front
- 27x10.50-15
- Lawn/turf rear
- 44x18.00-20
- Industrial front
- 10-16.5
- Industrial rear
- 17.5L-24
DIMENSIONS
- Wheelbase
- 76inches / 193cm
- Length
- 132.7inches / 337cm
- Width
- 65.4inches / 166cm *Minimum width
- Height (ROPS)
- 89.1inches / 226cm
- Ground clearance
- 13.2inches / 33cm
- Front axle
- Flange: 55.7 inch length /1414 mm
- Rear axle
- Flange: 48.8 inch length /1239 mm
CHALLENGER MT295B WEIGHT
- ROPS Shipping
- 3726lbs / 1690kg
- Max capacity
- 8378lbs / 3800kg
- Max front axle
- 4630lbs / 2100kg
- Max rear axle
- 4630lbs / 2100kg
DIMENSIONS & TIRES
- Wheelbase
- 76inches / 193cm
- Weight
- 3726lbs / 1690kg
- Front tire
- 9.5-16
- Rear tire
- 16.9-24
ATTACHMENT OVERVIEW
- Description
- Front-end loader/Backhoe
CHALLENGER ML40B LOADER
- Height (to pin)
- 114.5inches / 290cm
- Clearance, dumped bucket
- 84inches / 213cm
- Dump reach
- 22inches / 55cm
- Dump angle
- 47°
- Reach at ground
- 75inches / 190cm
- Rollback angle
- 30°
- Breakout force (at pin)
- 3252lbs / 1475kg
- Lift to full height (at pin)
- 2500lbs / 1134kg
- Lift to full height (at 500mm)
- 1921lbs / 871kg
- Lift to 1.5m (at 500mm)
- 2249lbs / 1020kg
- Bucket width
- 72inches / 182cm
- Raise time to height
- 4.5 s
- Bucket dump time
- 1.1 s
- Lowering time
- 2.9 s
- Rollback time
- 3.3 s
CHALLENGER MH30B BACKHOE
- Backhoe type
- Challenger MH30B Backhoe
- Transport height
- 81.5inches / 207cm
- Bucket width
- 10inches / 25cm/12inches / 30cm/16inches / 40cm/24inches / 60cm/37inches / 93cm
- Digging depth
- 100inches / 254cm
- Reach from pivot
- 127inches / 322cm
- Bucket Rotation
- 165
- Swing Arc
- 180
- Bucket force
- 4160lbs / 1886kg
- Dipperstick force
- 2600lbs / 1179kg
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 40
- Battery CCA
- 710
- Battery volts
- 12
About Challenger Tractor
The MT295B tractor is part of the Challenger's MT200B Series. The MT295B is a Compact Utility Tractors and that is often used for Agriculture Tractors activities. The engine of the MT295B tractors is impressive. This setup improves usability in the real world.
