Challenger MT297 Tractor (2004)

Manufacturer:Challenger

Price:25,500(USD)

Series:MT200 Series

Model:MT297

Equipment Type: Compact Utility Tractors

Factory:Iseki

Full Specifications

CHALLENGER MT297 POWER

Engine (gross): 55.3hp / 41.2kW
PTO (claimed): 45.6hp / 34.0kW

ENGINE DETAIL

Description: Iseki diesel 4-cylinder liquid-cooled
Displacement: 173ci / 2.8L
Power (gross): 55.3hp / 41.2kW
Rated RPM: 2500
Starter: electric
Starter volts: 12

CHALLENGER MT297 ENGINE

Description: Iseki 2.8L 4-cyl diesel
Fuel tank: 12.7gal / 48.1L

TRANSMISSIONS OVERVIEW

Description: 12-speed mechanical shuttle 16-speed power shuttle

TRANSMISSION 1

Type: mechanical shuttle
Gears: 12 forward and reverse
Clutch: dry disc

TRANSMISSION 2

Type: power shuttle
Gears: 16 forward and reverse
Clutch: dry disc (gears)/wet disc (shuttle)
Description: Four synchronized gears (1-4) in four ranges with power shuttle

MECHANICAL

Chassis: 4x4 MFWD 4WD
Differential lock: mechanical rear
Steering: power
Brakes: wet disc
Cab: Two-post folding ROPS.
Transmissions: 12-speed mechanical shuttle 16-speed power shuttle

HYDRAULICS

Type: open center
Pressure: 2600psi / 179.3bar
Pump flow: 11.4gpm / 43.1lpm
Total flow: 17.3gpm / 65.5lpm
Steering flow: 5.9gpm / 22.3lpm

TRACTOR HITCH

Rear Type: I
Control: position control draft control*Draft control standard with power shuttle, not available with mechanical shuttle
Rear lift (at ends): 3086lbs / 1399kg
Rear lift (at 24: 2600lbs / 1179kg

POWER TAKE-OFF (PTO)

Rear PTO: independent
Clutch: wet disc
Rear RPM: 540

CHALLENGER MT297 TIRES

Standard tires (ag): Front: 9.5-16. Rear: 13.6-28
Lawn/turf front: 27x12LL-15
Lawn/turf rear: 570-648
Industrial front: 10-16.5
Industrial rear: 17.5-24

DIMENSIONS

Wheelbase: 73.9inches / 187cm
Length: 137inches / 347cm
Width: 71.5inches / 181cm
Height (ROPS): 95.5inches / 242cm
Weight: 3878lbs / 1759kg
Front tread: 52.5inches / 133cm
Rear tread: 52 to 60inches / 132to 152cm

DIMENSIONS & TIRES

Wheelbase: 73.9inches / 187cm
Weight: 3878lbs / 1759kg
Front tire: 9.5-16
Rear tire: 13.6-28

ATTACHMENT OVERVIEW

Description: Front-end loader Backhoe

CHALLENGER ML40 LOADER

Height (to pin): 99.75inches / 253cm
Clearance, dumped bucket: 80.5inches / 204cm
Dump reach: 37inches / 93cm
Dump angle: 43°
Rollback angle: 15°
Lift to full height (at 500mm): 1600lbs / 725kg

CHALLENGER MH20 BACKHOE

Backhoe type: Challenger MH20 Backhoe
Transport height: 72.8inches / 184cm
Bucket width: 10inches / 25cm 12inches / 30cm 16inches / 40cm 24inches / 60cm 37inches / 93cm
2-Foot flat digging depth: 96inches / 243cm
Reach from pivot: 112.2inches / 284cm
Bucket Rotation: 165
Swing Arc: 180

ELECTRICAL

Ground: negative
Charging system: alternator
Battery volts: 12

About Challenger Tractor

The MT297 tractor is part of the Challenger's MT200 Series. The MT297 is a type of Compact Utility Tractors and that is primarily used for Agriculture Tractors activities. The MT297 tractor is powered by a engine. This setup offers a enhanced usability in the actual world.