Challenger MT535 Tractor (2003)
Manufacturer:Challenger
Price:N/A
Series:MT500 Series
Model:MT535
Equipment Type: Row-Crop Tractors
Factory:Beauvais, France
Full Specifications
OCED TRACTOR TEST 1861 2
- Description
- Diesel 32-speed 4WD December 1997 - September 1999, Link: OCED Tractor Test 1861 file PTO performance Drawbar performance Gear 2LA used for power test. Gear 3TC used for pull test
- Max power
- 98.8hp / 73.7kW
- Fuel use
- 6.0gal/hour / 22.7l/hour
- Power at rated engine speed
- 100.2hp / 74.7kW
- Power at rated PTO speed
- 103.5hp / 77.2kW
- Max pull
- 9,690lbs / 4395kg
CHALLENGER MT535 POWER
- PTO (claimed)
- 100hp / 74.6kW
- Drawbar (tested)
- 98.8hp / 73.7kW
- PTO (tested)
- 103.9hp / 77.5kW
ENGINE DETAIL
- Description
- Caterpillar 3056 turbocharged diesel 6-cylinder liquid-cooled vertical
- Displacement
- 365ci / 6.0L
- Bore/Stroke
- 3.937x5.00inches / 100x 127 mm
- Air cleaner
- dual paper elements
- Compression
- 16.0:1
- Rated RPM
- 2200
- Starter volts
- 12
CHALLENGER MT535 ENGINE
- Description
- Caterpillar 6.0L 6-cyl diesel
- Cab Fuel tank
- 59.4gal / 224.8L
- ROPS Fuel tank
- 42.3gal / 160.1L
TRANSMISSION
- Transmission
- AutoPower IV
- Type
- partial power shift
- Gears
- 32 forward and reverse
- Clutch
- hydraulic wet disc
- Description
- Four synchronized gears (1-4) in two synchronized ranges (low/high) with a four-speed (A-D) power shift on the left-hand power shuttle lever.
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD
- Steering
- power
- Brakes
- hydraulic wet disc
- Cab
- Cab optional with air-conditioning.
- Transmission
- 32-speed partial power shift
HYDRAULICS
- Type
- closed center pressure flow compensated (PFC)
- Pressure
- 2900psi / 200.0bar
- Valves
- 2 to 4
- Total flow
- 28gpm / 106.0lpm
TRACTOR HITCH
- Rear Type
- II
- Rear lift (at 24
- 7000lbs / 3175kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540/1000
CHALLENGER MT535 TIRES
- Ag front
- 11.00-16 (2WD)/14.9R28 (4WD)
- Ag rear
- 18.4R38
DIMENSIONS
- Wheelbase
- 108.3inches / 275cm
- Length
- 179inches / 454cm
- Width
- 88inches / 223cm *Minimum width
- Height (cab)
- 109inches / 276cm
CHALLENGER MT535 WEIGHT
- 2WD ROPS Shipping
- 9634lbs / 4369kg
- 4WD ROPS Shipping
- 10212lbs / 4632kg
- 2WD Cab Shipping
- 10185lbs / 4619kg
- 4WD Cab Shipping
- 10763lbs / 4882kg
- Operating
- 9,600lbs / 4354kg (2WD)/10,540lbs / 4780kg (4WD)
DIMENSIONS & TIRES
- Wheelbase
- 108.3inches / 275cm
- Weight
- 9600 to 10763 pounds
- Front tire
- 11.00-16
- Rear tire
- 18.4R38
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
About Challenger Tractor
The MT535 model tractor belongs to the Challenger MT500 Series. The MT535 is classified as a Row-Crop Tractors and that is often used for Agriculture Tractors production. The MT535 tractor is operated by a engine. This setup more efficiency in the actual world.
