John Deere 2630 Tractor (1975)
Manufacturer:John Deere
Price:11,000(USD)
Series:Generation II Series
Model:2630
Equipment Type: Utility Tractors
Factory:Dubuque, Iowa, USA
Full Specifications
NEBRASKA TRACTOR TEST 1157 2
- Description
- Diesel 16-speed 2WD April 16 - 25, 1974 Link: Nebraska Tractor Test 1157 file PTO performance Drawbar performance Gear 5-Hi used for power test Gear 5-Hi used for pull test
- Power at rated engine speed
- 70.37hp / 52.5kW
- Fuel use
- 4.3gal/hour / 16.3l/hour
- Power at rated PTO speed
- 69.02hp / 51.5kW
- Max power
- 57.88hp / 43.2kW
- Max pull
- 6,470lbs / 2934kg
JOHN DEERE 2630 POWER
- Drawbar (tested)
- 57.88hp / 43.2kW
- PTO (tested)
- 70.37hp / 52.5kW
ENGINE DETAIL
- Description
- John Deere diesel 4-cylinder liquid-cooled
- Displacement
- 276ci / 4.5L
- Bore/Stroke
- 4.19x5.00inches / 106x 127mm
- Rated RPM
- 2500
- Firing order
- 1-3-4-2
- Starter volts
- 12
- Coolant capacity
- 12qts / 11.4L
JOHN DEERE 2630 ENGINE
- Description
- John Deere 4.5L 4-cyl diesel
TRANSMISSIONS OVERVIEW
- Description
- 8-speed 16-speed partial power shift 8-speed power shuttle
TRANSMISSION 1
- Gears
- 8 forward and 4 reverse
TRANSMISSION 2
- Transmission
- Hi-Lo
- Type
- partial power shift
- Gears
- 16 forward and 8 reverse
- Clutch
- dry disc
- Description
- Four gears (1-4) in two ranges (I-II) plus reverse. High-low (rabbit/turtle) power shift
TRANSMISSION 3
- Transmission
- Direction Reverser
- Type
- power shuttle
- Gears
- 8 forward and reverse
- Description
- Four gears (1-4) in two ranges (I-II) with dashboard shuttle lever
MECHANICAL
- Chassis
- 4x2 2WD
- Steering
- mechanical with power assist
- Brakes
- differential hydraulic wet disc
- Cab
- Open operator station
- Transmissions
- 8-speed 16-speed partial power shift 8-speed power shuttle
CAPACITY
- Fuel
- 19.5gal / 73.8L
- Hydraulic system
- 10gal / 37.9L
HYDRAULICS
- Type
- closed center
- Capacity
- 10gal / 37.9L
- Pressure
- 2250psi / 155.1bar
- Valves
- 1
- Pump flow
- 6gpm / 22.7lpm (transmission) 8.5gpm / 32.2lpm (remotes) 18.5gpm / 70.0lpm (optional)
- Total flow
- 14.5gpm / 54.9lpm 24.5gpm / 92.7lpm
TRACTOR HITCH
- Rear Type
- II
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540/540/1000 (optional)
- Front PTO
- optional
- Front RPM
- 1000
JOHN DEERE 2630 TIRES
- Ag front
- 6.00-16
- Ag rear
- 16.9-28
DIMENSIONS
- Wheelbase
- 85.75inches / 217cm
- Operating weight
- 5,800lbs / 2630kg
- Ballasted weight
- 8,430lbs / 3823kg
DIMENSIONS & TIRES
- Wheelbase
- 85.75inches / 217cm
- Weight
- 5,800lbs / 2630kg
- Front tire
- 6.00-16
- Rear tire
- 16.9-28
2630 SERIAL NUMBERS
- Location
- Serial number plate on the right side of the Deere 2630 frame, above the front axle
- 1974
- 188604
- 1975
- 213360
ELECTRICAL
- Ground
- negative
- Battery volts
- 12
About John Deere Tractor
The John Deere 2630 tractor is part of the Generation II Series of tractors. The 2630 is a Utility Tractors type, which is used most often in Agriculture Tractors. The 2630 tractor has a engine. This arrangement is more practical in the actual world.
