John Deere 3025E Tractor
Manufacturer:John Deere
Price:18,879(USD)
Series:3E Series
Model:3025E
Equipment Type: Compact Utility Tractors
Factory:Augusta, Georgia, USA
Full Specifications
KEY SPECS
- Engine power (gross)
- 18.2 kW/24.7 hp
- Power take-off (PTO) power
- 14.4 kW/19.4 hp
- Steering hydraulics
- 15 L/min/4 gpm
- Implement hydraulics
- 20.2 L/min/5.3 gpm
- Hitch type
- Category 1
- Lift capacity, 24-in. behind link arms
- 615.1 kg/1356 lb
- Standard transmission; forward/reverse
- Hydrostatic transmission (HST)
- Cruise control
- Optional
- Approximate shipping weight (open-station; cab)
- 1007.9 kg/2222 lb
- Wheelbase
- 159.5 cm/62.8 in.
ENGINE
- Family
- EYDXL1.64NDA/FYDXL1.64NDA/GYDXL1.64NDA
- Manufacturer
- Yanmar
- Engine model
- 3TNV88F-EPJT2
- Engine power (gross)
- 18.2 kW/24.7 hp
- Power take-off (PTO) power
- 14.4 kW/19.4 hp
- Rated engine speed
- 2400 rpm
- Type
- Diesel
- Injection pump type
- Direct injection
- Aspiration
- Natural
- Emissions compliance
- Final Tier 4
- Cylinders/displacement
- 3 / 1.64 L/3 / 100.2 cu in.
- Number of cylinders
- Three
- Cylinder liners
- Cast-in-block
- Bore and stroke
- 88 x 90 mm/3.46 x 3.54 in.
- Compression ratio
- 19.1:1
- Lubrication
- Pressurized
- Cooling system
- Water pump
- Air cleaner
- Dual element
- Engine torque at rated speed
- 72.4 Nm/53.4 lb-ft
- Fuel tank capacity
- 28.5 L/7.5 U.S. gal.
ELECTRICAL
- Battery size
- 500 CCA
- Alternator (12-V)
- 55 amp
- Starter size
- 1.4 kW/1.9 hp
FUEL SYSTEM
- Type
- Direct injection
TRANSMISSION
- Standard transmission; forward/reverse
- Hydrostatic transmission (HST)
- Left-hand reverser
- No
- Final drive
- Bull Gear
- Brakes
- Wet disc
- Steering
- Power steering
- Axle capacity
- Front/798 kg/1760 lb/Rear/1197 kg/2640 lb/
- Creeper
- No
- Cruise control
- Optional
- Differential lock
- Yes
HYDRAULICS
- Type
- Open center
- Pump rated output
- Steering/15 L/min/4 gpm/Implement/20.2 L/min/5.3 gpm/35.2 L/min/9.3 gpm
- Pump type
- Dual gear
- Maximum operating pressure
- 172.4 bar/2500 psi
- Draft control sensing
- Position control
- Remote control valves available
- Up to two (optional)
3-POINT HITCH
- Type
- Category 1
- Lift capacity, 24-in. behind link arms
- 615.1 kg/1356 lb
POWER TAKE-OFF (PTO)
- Standard
- Rear - 540 rpm
- Control
- Independent
- Clutch
- Wet disk
- Brake (for mid and rear PTO)
- Wet disk
FLUID CAPACITIES
- Crankcase with filter
- 4.5 L/4.8 qt
- Transmission and hydraulic system
- 22 L/23.2 qt
FINAL DRIVE
- Type
- Bull Gear
OPERATOR STATION
- Rollover protective structure
- Type/Foldable/ASABE S478
- Platform - flat/straddle
- Semi-flat
- Gear shift location - console/floor
- Left-hand side
DIMENSIONS
- Wheelbase
- 159.5 cm/62.8 in.
- Front axle clearance
- 36.3 cm/14.3 in.
- Turning radius without brakes
- 2.9 m/9.4 ft
- Approximate shipping weight (open-station; cab)
- 1007.9 kg/2222 lb
TIRES
- Front
- Farm - 7-14/Turf - 27x8.5-15/R4 - 25x8.5-14/R4 - 27x8.5-15
- Rear
- Farm - 11.2-24/Turf - 41x14-20/R4 - 15-19.5/R4 - 43x16-20
About John Deere Tractor
The 3025E model tractor is part of John Deere's 9R line of tractors. The 3025E is a type of Compact Utility Tractors and that is often used for Agriculture Tractors purposes. The 3025E tractor features a 19.4 horsepower engine. This arrangement is more practical in the real world.
