John Deere 8100 Tractor (1999)
Manufacturer:John Deere
Price:N/A
Series:8000 / 8000T Series
Model:8100
Equipment Type: Row-Crop Tractors
Factory:Waterloo, Iowa, USA
Full Specifications
NEBRASKA TRACTOR TEST 1688 2
- Description
- 16-speed 4WD April 19 - May 15, 1995 Link: Nebraska Tractor Test 1688 file PTO performance Drawbar performance Gear 8 used for power test Gear 3 used for pull test
- Max power
- 141.81hp / 105.7kW
- Fuel use
- 9.1gal/hour / 34.4l/hour
- Power at rated engine speed
- 160.40hp / 119.6kW
- Max pull
- 21,586lbs / 9791kg
JOHN DEERE 8100 POWER
- PTO (claimed)
- 160hp / 119.3kW
- Drawbar (tested)
- 141.81hp / 105.7kW
- PTO (tested)
- 179.15hp / 133.6kW
ENGINE DETAIL
- Description
- John Deere turbocharged diesel 6-cylinder liquid-cooled
- Displacement
- 466ci / 7.6L
- Bore/Stroke
- 4.5625x4.75inches / 116x 121mm
- Air cleaner
- dual paper elements with aspirator
- Compression
- 15.1:1
- Rated RPM
- 2200
- Firing order
- 1-5-3-6-2-4
- Starter volts
- 12
- Oil capacity
- 22.7qts / 21.5L
- Coolant capacity
- 28.8qts / 27.3L
JOHN DEERE 8100 ENGINE
- Description
- John Deere 7.6L 6-cyl diesel
TRANSMISSION
- Transmission
- John Deere PowerShift
- Type
- full power shift
- Gears
- 16 forward and 4 reverse
- Clutch
- hydraulic wet disc
- Oil capacity
- 148qts / 140.1L
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD
- Final drives
- inboard planetary
- Differential lock
- electro-hydraulic
- Steering
- hydrostatic power
- Brakes
- differential hydraulic wet disc
- Cab
- CommandView Cab standard. Row-Trak guidance optional
- Transmission
- 16-speed full power shift
CAPACITY
- Fuel
- 135gal / 511.0L
- Hydraulic system
- 37gal / 140.0L
- Front hubs
- 3.2qts / 3.0L (each)
- Front diff.
- 11.5qts / 10.9L
HYDRAULICS
- Type
- closed center pressure-flow compensated (PFC)
- Capacity
- 37gal / 140.0L
- Pressure
- 2900psi / 200.0bar
- Valves
- 3 to 5
- SCV flow
- 30gpm / 113.6lpm
TRACTOR HITCH
- Rear Type
- 3/3N
- Control
- electro-hydraulic draft sensing
- Rear lift
- 10,400lbs / 4717kg 14,165lbs / 6425kg (optional)
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 1000 (1.75) / 540/1000 (1.375 optional)
JOHN DEERE 8100 TIRES
- 2WD Standard tires (ag)
- Front: 11.00-24. Rear: 18.4R46 Front: 14.9R34. Rear: 18.4R46
DIMENSIONS
- 2WD Wheelbase
- 122.8inches / 311cm
- 4WD Wheelbase
- 116.1inches / 294cm
- Length
- 206.5inches / 524cm
- Height
- 120.2inches / 305cm
- 4WD Ground clearance
- 23.2inches / 58cm
- 2WD Ground clearance
- 31.5inches / 80cm
- Rear axle
- Optional large axle: 4.331 by 118.5inches / 110by 3009mm
- 2WD Front tread
- 60 to 84inches / 152to 213cm
- 4WD Front tread
- 60 to 88inches / 152to 223cm
JOHN DEERE 8100 WEIGHT
- 2WD Shipping
- 16435lbs / 7454kg
- 4WD Shipping
- 17876lbs / 8108kg
- Operating
- 18,914lbs / 8579kg
DIMENSIONS & TIRES
- 2WD Wheelbase
- 122.8inches / 311cm
- 4WD Wheelbase
- 116.1inches / 294cm
- Weight
- 16435 to 18914 pounds
- Front tire
- 11.00-24
- 2WD Rear tire
- 18.4R46
8100 SERIAL NUMBERS
- Location
- Serial number plate on the rear of the tractor, above the PTO shaft
- 1995
- 1001
- 1996
- 4001
- 1997
- 10001
- 1998
- 20001
- 1999
- 24001
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 140
- Batteries
- 2
- Battery CCA
- 925
- Battery volts
- 12
About John Deere Tractor
The John Deere 8100 tractor is part of the 8000 / 8000T Series of tractors. The 8100 is classified as a Row-Crop Tractors and is majorly used for Agriculture Tractors activities. The 8100 tractor is equipped by a engine. This setup improves usability in the real world.
