John Deere 3038E Tractor (2020)

Manufacturer:John Deere

Price:23,800(USD)

Series:3 Series

Model:3038E

Equipment Type: Compact Tractors

Factory: Augusta, Georgia, USA

Full Specifications

KEY SPECS

Power take-off (PTO) power: 22.4 kW30 hp
Steering hydraulics: 15 L/min4 gpm
Implement hydraulics: 20.2 L/min5.3 gpm
Hitch type: Category 1
Lift capacity, 24-in. behind link arms: 615 kg1356 lb
Standard transmission; forward/reverse: Hydrostatic transmission (HST)
Cruise control: Optional
Approximate shipping weight (open-station; ca: Open operator station (OOS): 1210 kg2668 lbCab: Not applicable
Wheelbase: 1593 mm62.7 in.
Engine power (gross): 27.4 kW/36.7 hp
Power take-off (PTO) power: 22.4 kW/30 hp
Steering hydraulics: 15 L/min/4 gpm
Implement hydraulics: 20.2 L/min/5.3 gpm
Lift capacity, 24-in. behind link arms: 615 kg/1356 lb
Approximate shipping weight (open-station; cab): Open operator station (OOS): 1210 kg/2668 lb/Cab: Not applicable
Wheelbase: 1593 mm/62.7 in.

ENGINE

Family: FYDXL1.57TDAEYDXL1.57TDAGYDXL1.57TDA
Manufacturer: Yanmar
Engine model: 3TNV86CT-NJT2
Engine power (gross): 27.4 kW36.7 hp
Power take-off (PTO) power: 22.4 kW30 hp
Rated engine speed: 2500 rpm
Type: Diesel
Injection pump type: High pressure common rail direct injection
Aspiration: Turbocharged
Emissions compliance: Final Tier 4
Cylinders/displacement: 3 / 1.57 L3 / 95.7 cu in.
Number of cylinders: Three
Cylinder liners: Cast-in-block
Bore and stroke: 86 x 90 m3.4 x 3.54 in.
Compression ratio: 19.1:1
Lubrication: Pressurized
Cooling system: Water Pump
Air cleaner: Dual element
Engine torque at rated speed: 104.7 Nm77.2 lb-ft
Fuel tank capacity: 28.5 L7.5 gal.
Family: FYDXL1.57TDA/EYDXL1.57TDA/GYDXL1.57TDA
Engine power (gross): 27.4 kW/36.7 hp
Power take-off (PTO) power: 22.4 kW/30 hp
Cylinders/displacement: 3 / 1.57 L/3 / 95.7 cu in.
Bore and stroke: 86 x 90 m/3.4 x 3.54 in.
Engine torque at rated speed: 104.7 Nm/77.2 lb-ft
Fuel tank capacity: 28.5 L/7.5 gal.

ELECTRICAL

Battery size: 500 CCA
Alternator (12-V): 55 amp
Starter size: 1.4 kW1.9 hp
Starter size: 1.4 kW/1.9 hp

FUEL SYSTEM

Type: High pressure common rail direct injection
Fuel consumption
Fuel consumption: /

TRANSMISSION

Standard transmission; forward/reverse: Hydrostatic transmission (HST)
Optional transmission; forward/reverse
Left-hand reverser: No
Transmission gear ranges
Final drive: Spur gear
Brakes: Wet disk
Steering: Power steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacity: Front880 kg1940 lbRear1200 kg2645 lb
Creeper: No
Cruise control: Optional
Differential lock: Yes
Drawbar maximum vertical load
Axle capacity: Front/880 kg/1940 lb/Rear/1200 kg/2645 lb/

HYDRAULICS

Type: Open center
Pump rated output: Steering15 L/min4 gpmImplement20.2 L/min5.3 gpm35.2 L/min9.3 gpm
Pump type: Dual gear
Maximum operating pressure: 172 bar2495 psi
Draft control sensing: Position control
Remote control valves available: Up to two (optional)
Pump rated output: Steering/15 L/min/4 gpm/Implement/20.2 L/min/5.3 gpm/35.2 L/min/9.3 gpm
Maximum operating pressure: 172 bar/2495 psi

3-POINT HITCH

Type: Category 1
Lift capacity, 24-in. behind link arms: 615 kg1356 lb
Lift capacity, 24-in. behind link arms: 615 kg/1356 lb

POWER TAKE-OFF (PTO)

Standard: Rear - 540 rpm
Optional
Control: Independent
Clutch: Wet disk
Brake (for mid and rear PTO): Wet disk
Engagement method

FLUID CAPACITIES

Crankcase with filter: 4.5 L4.8 qt
Transmission and hydraulic system: 20.8 L22 qt
Crankcase with filter: 4.5 L/4.8 qt
Transmission and hydraulic system: 20.8 L/22 qt

FINAL DRIVE

Type: Spur gear
Differential lock: Yes

OPERATOR STATION

Rollover protective structure: TypeFoldable
Platform - flat/straddle: Straddle
Gear shift location - console/floor: Left-hand side
Rollover protective structure: Type/Foldable/

DIMENSIONS


Height
Wheelbase: 1593 mm62.7 in.
Front axle clearance: Minimum: 299 mm11.8 in.Maximum: 333 mm13.1 in.
Turning radius with brakes
Turning radius without brakes: 2.9 m9.4 ft
Limited slip differential
Approximate shipping weight (open-station; ca: OOS: 1210 kg2668 lbCab: Not applicable
Wheelbase: 1593 mm/62.7 in.
Front axle clearance: Minimum: 299 mm/11.8 in./Maximum: 333 mm/13.1 in.
Turning radius without brakes: 2.9 m/9.4 ft
Approximate shipping weight (open-station; cab): OOS: 1210 kg/2668 lb/Cab: Not applicable

TIRES

Front: R1 Bar: 7-14R3 Turf: 27x8.5-15R4 Industrial: 25x8.5-14R4 Industrial: 27x8.5
Rear: R1 Bar: 11.2-24R3 Turf: 41x14-20R4 Industrial: 15-19.5R4 Industrial: 43x16-
Front tread range
Rear tread spacing
Front: R1 Bar: 7-14/R3 Turf: 27x8.5-15/R4 Industrial: 25x8.5-14/R4 Industrial: 27x8.5-15
Rear: R1 Bar: 11.2-24/R3 Turf: 41x14-20/R4 Industrial: 15-19.5/R4 Industrial: 43x16-20

About John Deere Tractor

The John Deere 3038E tractor is part of the 3 Series of tractors. The 3038E is a Compact Tractors and is majorly used for Agriculture Tractors operations. The 30 horsepower engine of the 3038E tractors is impressive. This arrangement improves usability in the real world situation.