John Deere 4066R Tractor 

Manufacturer:John Deere

Price:N/A

Series:4 Series

Model:4066R

Equipment Type: Compact Utility Tractors

Factory:

Full Specifications

KEY SPECS

Engine power (gross)
48.5kW / 65.9hp / PS at 2600rpm / SAE J1995 rated power
Power take-off (PTO) power
PRT - 40.4kW / 54.2hp / eHST - 38.7kW / 52hp / Per SAE J1995
Steering hydraulics
23.5L/min / 6.2gpm
Implement hydraulics
42.3L/min / 11.2gpm
Hitch type
Category 1
Lift capacity, 24-in. behind link arms
1135kg / 2500lb
Standard transmission; forward/reverse
eHydro Transmission (eHST)
Cruise control
Standard
Approximate shipping weight (open-station; cab)
Open operator station (OOS) - 1710 kg/3770 lb/Cab - 2120 kg/4675 lb
Wheelbase
185.5cm / 73in

ENGINE

Family
EYDXL2.09HDA/FYDXL2.09HDA/GYDXL2.09HDA
Manufacturer
Yanmar
Engine model
4TNV86CHT-MJT
Engine power (gross)
48.5kW / 65.9hp / PS at 2600rpm / SAE J1995 rated power
Power take-off (PTO) power
PRT - 40.4kW / 54.2hp / eHST - 38.7kW / 51.9hp / Per SAE J1995
Rated engine speed
2600 rpm
Type
Diesel
Injection pump type
High pressure common rail direct injection
Aspiration
Turbocharged and charge air cooled
Emissions compliance
Final Tier 4
Cylinders/displacement
4 / 2.091L / 4 / 127.6cu in.
Number of cylinders
Four
Cylinder liners
Cast-in-block
Bore and stroke
86 x 90mm / 3.4 x 3.54 in
Compression ratio
19.1:1
Lubrication
Pressurized
Cooling system
Liquid
Air cleaner
Dual element with electronic restriction indicator
Engine torque at rated speed
178Nm / 131.3lb-ft
Fuel tank capacity
Rollover protective structure (ROPS) - 56.9 L/15 U.S. gal./Cab - 52.2 L/13.8 U.S. gal.

ELECTRICAL

Battery size
770 CCA
Alternator (12-V)
75 amp
Starter size
2kW / 2.68hp

FUEL SYSTEM

Type
High pressure common rail direct injection

TRANSMISSION

Standard transmission; forward/reverse
eHydro transmission (eHST)
Optional transmission; forward/reverse
12/12 PowrReverser transmission (PRT)
Left-hand reverser
PRT only
Transmission gear ranges
PRT - 12F/12R eHydro - Infinitely-variable 3 range
Final drive
Planetary
Brakes
Multi-plate wet disc
Steering
Hydrostatic power steering
Clutch, wet/dry
Wet
Clutch disk diameter wet clutch
129mm / 5.08in
Axle capacity
Front 1600kg / 3528lb / Rear / 2400kg / 5292lb
Creeper
SpeedMatch standard
Cruise control
Standard
Differential lock
Yes

HYDRAULICS

Type
Open center
Pump rated output
Steering 23.5L min 6.2 gpm Implement 42.3 L min 11.2 gpm 65.8 L min 17.4 gpm
Pump type
Single gear
Draft control sensing
Position control
Remote control valves available
Up to six rear remotes

3-POINT HITCH

Type
Category 1
Lift capacity, 24-in. behind link arms
1135kg / 2500lb

POWER TAKE-OFF (PTO)

Standard
Independent 540 rpm at 2600 rpm
Optional
540E rpm
Control
Independent
Clutch
Wet disc

FLUID CAPACITIES

Crankcase with filter
5.3L / 1.4qt
Transmission and hydraulic system
47.3L / 12.5gal

FINAL DRIVE

Type
Planetary
Differential lock
Yes

OPERATOR STATION

Rollover protective structure
Type / Foldable / Yes
Platform - flat/straddle
Flat
Gear shift location - console/floor
PRT - Left-hand side

CAB

Compliance
OSHA, SAE, ASAE
Visibility
360 degree (angle)
Air conditioning, temperature differential
14.4°C / 58°F
Doors
Two
Noise rating
78 dBA
Seat equipment
Air suspension with swivel

DIMENSIONS

Wheelbase
185.5cm / 73in
Front axle clearance
35.1cm / 13.8in
Turning radius with brakes
2.8m / 9.19ft
Turning radius without brakes
3m / 9.84ft
Approximate shipping weight (open-station; cab)
Open operator station (OOS) - 1710 kg/3770 lb/Cab - 2120 kg/4675 lb

TIRES

Front
Farm - 8-16 / Turf - 27x10.5-15 or 27x12LL-15 / Industrial - 10-16.5
Rear
Farm - 13.6-28 / Turf - 44x18-20 or 22.5LL-16.1/Industrial - 16.9Lx24
Front tread range
148.1cm / 58.3in
Rear tread spacing
137.2cm / 54in

About John Deere Tractor

The 4066R model tractor belongs to the John Deere 4 Series. The 4066R is a Compact Utility Tractors type, which is used most often in Agriculture Tractors. The engine of the 4066R tractor produces. This arrangement more effectiveness in the actual world.

Also See