John Deere 4560 Tractor (1994)

Manufacturer:John Deere

Price:75,000(USD)

Series:4060 Series

Model:4560

Equipment Type: Row-Crop Tractors

Factory:Waterloo, Iowa, USA

Full Specifications

OCED TRACTOR TEST 1620 2

Description: Diesel Powershift 4WD April 1 - May 1, 1989 Link: OCED Tractor Test 1620 file PTO performance Drawbar performance Gear 12 used for power test Gear 3 used for pull test
Max power: 131.40hp / 98.0kW
Fuel use: 8.9gal/hour / 33.7l/hour
Power at rated engine speed: 156.89hp / 117.0kW
Max pull: 20,923lbs / 9490kg

OCED TRACTOR TEST 1629 2

Description: Diesel Quad-Range 2WD September 1 - October 1, 1989 Link: OCED Tractor Test 1629 file PTO performance Drawbar performance
Max power: 139.99hp / 104.4kW
Fuel use: 9.0gal/hour / 34.1l/hour
Power at rated engine speed: 156.83hp / 116.9kW
Max pull: 17,784lbs / 8066kg

JOHN DEERE 4560 POWER

PTO (claimed): 155hp / 115.6kW
Drawbar (tested): 139.99hp / 104.4kW
PTO (tested): 162.53hp / 121.2kW

ENGINE DETAIL

Description: John Deere turbocharged diesel 6-cylinder liquid-cooled inline valve-in-head
Displacement: 466ci / 7.6L
Bore/Stroke: 4.5625x4.75inches / 116x 121mm
Air cleaner: dual dry element
Compression: 15.5:1
Rated RPM: 2200
Firing order: 1-5-3-6-2-4
Starter volts: 12
Oil capacity: 22qts / 20.8L
Coolant capacity: 32qts / 30.3L

JOHN DEERE 4560 ENGINE

Description: John Deere 7.6L 6-cyl diesel

TRANSMISSIONS OVERVIEW

Description: 16-speed partial power shift 15-speed full power shift

TRANSMISSION 1

Transmission: John Deere Quad Range
Type: partial power shift
Gears: 16 forward and 6 reverse
Clutch: Perma-Clutch hydraulic wet disc
Description: Four gears (1-4) in four ranges (A-D) with high-low power shift

TRANSMISSION 2

Transmission: John Deere Power Shift
Type: full power shift
Gears: 15 forward and 4 reverse

MECHANICAL

Chassis: 4x2 2WD/4x4 MFWD 4WD
Final drives: inboard planetary
Steering: power
Brakes: differential hydraulic wet disc
Cab: Sound-Gard cab standard
Transmissions: 16-speed partial power shift 15-speed full power shift

CAPACITY

Fuel: 102gal / 386.1L
Hydraulic system: 19.8gal / 74.9L

HYDRAULICS

Type: closed center
Capacity: 19.8gal / 74.9L
Pressure: 2530psi / 174.4bar
Rear valves: 3 or 4
Pump flow: 35.3gpm / 133.6lpm (Quad-Range)/32.8gpm / 124.1lpm (Power Shift)

TRACTOR HITCH

Rear Type: 3/3N
Control: electrohydraulic draft sensing
Rear lift: 8,283lbs / 3757kg 10,041lbs / 4554kg

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 1000

JOHN DEERE 4560 TIRES

Ag front: 11.00-16
Ag rear: 20.8-38

DIMENSIONS

2WD Wheelbase: 118.5inches / 300cm
4WD Wheelbase: 117.1inches / 297cm
Width: 118.5inches / 300cm
Height: 118.8inches / 301cm
Shipping weight: 18,603lbs / 8438kg
Front axle: Caster/Action MFWD
Rear axle: Rack-and-pinion
Rear tread: 60 to 134inches / 152to 340cm

DIMENSIONS & TIRES

2WD Wheelbase: 118.5inches / 300cm
4WD Wheelbase: 117.1inches / 297cm
Weight: 18,603lbs / 8438kg
Front tire: 11.00-16
Rear tire: 20.8-38

JOHN DEERE 840 LOADER

Clearance, dumped bucket: 149inches / 378cm
Dump angle: 60°
Rollback angle: 40°
Lift to full height (at pin): 4,966lbs / 2252kg
Bucket width: 96.5inches / 245cm

4560 SERIAL NUMBERS

Location: Rear of transmission
1992: 1001
1993: 3221
1994: 4501

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 120
Batteries: 2
Battery CCA: 925
Battery volts: 12

About John Deere Tractor

The John Deere 4560 tractor is part of the 4060 Series of tractors. The 4560 is classified as a Row-Crop Tractors and that is often used for Agriculture Tractors applications. The engine of the 4560 tractor generates. This setup improves usability in the real world scenario.