John DeereRow-Crop Tractors 8R Series 8R 280 Full Specifications

KEY SPECS

Engine description: John Deere PowerTech PVS 9.0 L (B20 diesel compatible)
Engine displacement: 9 L/549 cu in.
Rated engine power: ECE-R120: 206 kW/280 hp
Maximum engine power: ECE-R120: 227 kW/308 hp
Rated PTO power (hp SAE): 170 kW/228 hp
Transmission type: Standard: e23 PowerShift with Efficiency Manager 40K, 40 km/h (24.9 mph)/Optional: 16-speed PowerShift 40 km/h (24.9 mph)/e23 PowerShift with Efficiency Manager 50K, 50 km/h (31 mph)/John Deere AutoPowr IVT 40K, 0.05-42 km/h (0.03-26 mph)/John Deere AutoPowr IVT 50K, 0.05-50 km/h (0.03-31 mph)
Hydraulic pump rated output: Standard: 85-cc pump: 227.1 L/min/60 gpm/Optional: 85-cc plus 35-cc dual pump: 318 L/min/84 gpm
Rear hitch category (SAE designation): Standard: Category 3/3N standard lift at 610 mm (24 in.) behind hitchpoint: 6350/14,000 lb/Optional: Category 3/3N at 610 mm (24 in.) behind hitchpoint: 8391 kg/18,500 lb/Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 9072 kg/20,000 lb
Base machine weight: MFWD/PowerShift: 11,700 kg/25,800 lb/ILS/e23: 12,700 kg/28,000 lb

ENGINE SPECIFICATIONS

Description: John Deere PowerTech PVS 9.0 L (B20 diesel compatible)
Engine type: Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head
Engine family: MJDXL09.0333
Rated speed: 2100 rpm
Aspiration: Single, variable geometry turbo; air-to-air aftercooling and cooled exhaust gas recirculation
Cylinders liners: Wet-sleeve
Emission level: Final Tier 4
After treatment type: Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Displacement: 9 L/549 cu in.

ENGINE PERFORMANCE

Rated power: ECE-R120: 206 kW/280 hp
Rated PTO power (hp SAE): 170 kW/228 hp
Power boost: 10 percent
Maximum engine power: ECE-R120: 227 kW/308 hp
Engine peak torque: At 1600 rpm: 1311 Nm/966 lb-ft
PTO torque rise: 40 percent

TRANSMISSION

Type: Standard: e23 PowerShift with Efficiency Manager 40K, 40 km/h/24.9 mph/Optional: 16-speed PowerShift 40 km/h/e23 PowerShift with Efficiency Manager 50K, 50 km/h/31 mph/John Deere AutoPowr IVT 40K, 0.05-42 km/h (0.03-26 mph)/John Deere AutoPowr IVT 50K, 0.05-50 km/h (0.03-31 mph)

HYDRAULIC SYSTEM

Type: Closed-center, pressure/flow compensated system with load sensing
Pump rated output: Standard: 85-cc pump: 227.1 L/min/60 gpm/Optional: 85-cc plus 35-cc dual pump: 318 L/min/84 gpm
Available flow at a single rear SCV: 1.3-cm (1/2-in.) couplers: 132 L/min/35 gpm/1.9-cm (3/4-in.) coupler: 159 L/min/42 gpm
Available flow at front SCVs: 96 L/min/25 gpm
Number of rear selective control valves (SCVs): Standard: 1.3-cm (1/2-in.) ISO couplers: 4/Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available/1.9-cm (3/4-in.) ISO coupler: 1
SCV control: Electronic

REAR HITCH

Hitch category (SAE designation): Standard: Category 3/3N standard lift at 610 mm (24 in.) behind hitchpoint: 6350 kg/14,000 lb/Optional: Category 3/3N at 610 mm (24 in.) behind hitchpoint: 8391 kg/18,500 lb/Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 9072 kg/20,000 lb
Maximum lift capacity behind lift points: Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg/26,729 lb
Sensing type: Electrohydraulic
Rear axle differential lock: Electrohydraulic

DRAWBAR

Drawbar category: Standard: Category 3/Optional: Category 4/Category 4 with heavy-duty support
Maximum vertical load: Dependent on drawbar position: 1837 to 2700 kg/4050 to 6000 lb/Optional: 2,245 kg/4,950 lb/4,990 kg/11,000 lb

REAR POWER TAKE-OFF (PTO)

Type: Independent/Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm/Optional: 44 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm/44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm
Engine rpm (at rated PTO speeds): 16-speed PowerShift: 1,000 PTO rpm at 2,003 engine rpm, 1,000 ECO PTO rpm at 1,596 engine rpm, 540 PTO rpm at 1,817 engine rpm/IVT: 1,000 PTO rpm at 2,000 engine rpm, 1,000 ECO PTO at 1594 engine rpm, 540 PTO rpm at 1,814 engine rpm/e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm
Multispeed PTO option availability: Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable
PTO actuation: Electrohydraulic with adjustable modulation

FRONT HITCH

Category: Category 3N
Standard lift capacity: Category 3N ground-engaging front hitch: 5200 kg/11,464 lb
Front power take-off (PTO): 44 mm (1.75 in.) 20 spline, 1000 rpm/35 mm (1.375 in.) 21 spline, 1000 rpm/35 mm (1.375 in.) 6 spline, 1000 rpm (available dependent on location)
PTO speed: 1,000 PTO rpm at 2000 engine rpm

REAR AXLE

Type: Standard: Rack-and-pinion, double flat, or flange axles/Optional: Long, dual taper hub: Diameter: 110 x 3010 mm/4.33 x 118.5 in./Short, double flat axle with single taper hub: Diameter: 120 x 2550 mm/4.72 x 100.4 in.
Final drive type: Inboard planetary three pinion
Rear differential lock: Full-locking electrohydraulic

FRONT AXLE

Type: Standard: 1300 Series MFWD/Optional: 1500 Series MFWD/ILS
Front axle differential lock: 1300 Series MFWD: Limited Slip/1500 Series MFWD: Full-locking electrohydraulic/ILS: Full-locking electrohydraulic

TIRES

Wheel tread range: 1300 Series MFWD: 1524-2235 mm/60-88 in./1500 Series MFWD: 1524-3657 mm/60-144 in./ILS: 1524-3657 mm
Turning radius without brakes: 1300 Series with 380/85R34 group 42 tires at 152.4-cm (60-in.) spacing, 5.4 m/17.7 ft/ILS with 380/85R34 group 42 tires at 152.4-cm (60-in.) spacing, 5.42 m/17.8 ft
Central Tire Inflation System (CTIS): Optional

STEERING

Type: Standard: Hydraulic power-steering with electric pump back-up/Optional: ActiveCommand Steering 2 (ACS 2) with electronic backup pump

ELECTRICAL SYSTEM

Alternator size: Standard: 200 amp/Optional: 330 amp
Battery options: 12 V
Working lights: Standard: 18 halogen/Available: 18 LED/22 LED
Type of bulb in headlight (Halogen, Zenon, LED): /Standard: halogen, 65 W/Available: LED
Total cold cranking amps: 1,850 CCA

OPERATOR STATION

Seat: Degree of seat swivel, left hand/25 degree (angle)/Degree of seat swivel, right hand/40 degree (angle)/Standard: air suspension/Optional: ActiveSeat II
Cab suspension: Optional
Instructional seat: Standard
Display: Standard: 4600 Generation 4 CommandCenter: 25.4 cm/10 in.
Radio: Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume: 3.24 m3/114 cu ft
Cab glass area: 6.52 m2/70.18 sq ft

DIMENSIONS

Wheelbase: MFWD: 3,080 mm/121.3 in./ILS: 3,050 mm/120.1 in.
Overall length: 6,636 mm/261.3 in.
Drawbar clearance: 376 mm/14.8 in.
Front axle center: MFWD: 686 mm/27 in./ILS: 590 mm/23.2 in.

WEIGHT

Base machine weight: MFWD/PowerShift: 11,700 kg/25,800 lb/ILS/e23: 12,700 kg/28,000 lb
Maximum ballast level: 20,000 kg/44,100 lb
Maximum permissible weight: 20,000 kg/44,100 lb

CAPACITIES

Crankcase oil volume: 1300 MFWD: 25.7 L/6.8 U.S. gal./1500 MFWD: 27.6 L/7.3 U.S. gal./ILS: 25.8 L
Fuel tank: 727 L/192 U.S. gal./CTIS: 651 L/172 U.S. gal.
Diesel exhaust fluid (DEF) tank: 37.2 L/9.8 U.S. gal.
Cooling system: 42.3 L/11.2 U.S. gal.
Transmission-hydraulic system: 1300 MFWD: 180.7 L/37 U.S. gal./1500 MFWD: 184.6 L/48.8 U.S. gal./ILS: 207.2 L/54.7 U.S. gal.

SERVICEABILITY

Interval for engine oil change: 500 hours
Interval for hydraulic/transmission oil change: 1,500 hours
Interval for engine coolant change: 6,000 hours

LOADERS

Loader: H480
Lift capacity at full height: 2,486 kg/5469 lb/measured at 800 mm (31.5 in.) ahead of pivot
Maximum lift height: 4735 mm/186 in.

PRECISION AG

Guidance: Integrated AutoTrac
Telematic: JDLink hardware standard, activations, and Ethernet harnesses (availability dependent upon destination)
Remote diagnostics: JDLink hardware standard