John Deere 8R 410 Tractor (2021)
Manufacturer:John Deere
Price:492,755(USD)
Series:8R Series
Model:8R 410
Equipment Type: Row-Crop Tractors
Factory:Waterloo, Iowa, USA
Full Specifications
KEY SPECS
- Engine description
- John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)
KEY SPECS
- Engine displacement
- 9 L549 cu in.
- Rated engine power
- ECE-R120: 302 kW410 hp
- Maximum engine power
- ECE-R120: 326 kW443 hp
- Rated PTO power (hp SAE)
- 231 kW310 hp
- Transmission type
- Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h (24.9 mph)Optional: e23 PowerShift with Efficiency Manager 50K, 50 km/h (31 mph)"
- Hydraulic pump rated output
- Standard: 85-cc pump: 227.1 L/min60 gpmOptional: 85-cc plus 35-cc dual pump: 318 L/min84 gpm
- Rear hitch category (SAE designation)
- Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg20,000 lbOptional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg15,000 lb"
- Base machine weight
- ILS™/e23: 12,700 kg28,000 lb"
ENGINE SPECIFICATIONS
- Description
- John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)
- Engine type
- Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head"
- Engine family
- MJDXL09.0333
- Rated speed
- 2100 rpm
- Aspiration
- Dual turbochargers, variable geometry turbo with fixed geometry turbo in series; air-to-air aftercooling and cooled exhaust gas recirculation"
- Cylinders liners
- Wet-sleeve
- Emission level
- Final Tier 4
- After treatment type
- Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
- Displacement
- 9 L549 cu in.
ENGINE PERFORMANCE
- Rated power
- ECE-R120: 302 kW410 hp
- Rated PTO power (hp SAE)
- 231 kW310 hp
- Power boost
- 8 percent
- Maximum engine power
- ECE-R120: 326 kW443 hp
- Engine peak torque
- At 1600 rpm: 1851 Nm1365 lb-ft
- PTO torque rise
- 40 percent
TRANSMISSION
- Type
- Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h24.9 mphOptional: e23 PowerShift with Efficiency Manager 50K, 50 km/h31 mph"
HYDRAULIC SYSTEM
- Type
- Closed-center, pressure/flow compensated system with load sensing"
- Pump rated output
- Standard: 85-cc pump: 227.1 L/min60 gpmOptional: 85-cc plus 35-cc dual pump: 318 L/min84 gpm
- Available flow at a single rear SCV
- 1.3-cm (1/2-in.) couplers: 132 L/min35 gpm1.9-cm (3/4-in.) coupler: 159 L/min42 gpm
- Available flow at front SCVs
- 96 L/min25 gpm
- Number of rear selective control valves (SCVs
- Standard: 1.3-cm (1/2-in.) ISO couplers: 4Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available1.9-cm (3/4-in.) ISO coupler: 1
- SCV control
- Electronic
REAR HITCH
- Hitch category (SAE designation)
- Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg20,000 lbOptional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg15,000 lb"
- Maximum lift capacity behind lift points
- Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg26,729 lb"
- Sensing type
- Electrohydraulic
- Rear axle differential lock
- Electrohydraulic
DRAWBAR
- Drawbar category
- Standard: Category 4Optional: Category 4 with heavy-duty support
- Maximum vertical load
- Dependent on drawbar position: 1837 to 2700 kg4050 to 6000 lbOptional: 2,245 kg4,950 lb4,990 kg11,000 lb"
REAR POWER TAKE-OFF (PTO)
- Type
- IndependentStandard: 44 mm (1.75 in.) 20-spline, 1,000 rpmOptional: 44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm"
- Engine rpm (at rated PTO speeds)
- e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm"
- Multispeed PTO option availability
- Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable"
- PTO actuation
- Electrohydraulic with adjustable modulation
FRONT HITCH
- Category
- Category 3N
- Standard lift capacity
- Category 3N ground-engaging front hitch: 5200 kg11,464 lb"
- Front power take-off (PTO)
- 44 mm (1.75 in.) 20 spline, 1000 rpm35 mm (1.375 in.) 21 spline, 1000 rpm35 mm (1.375 in.) 6 spline, 1000 rpm (available dependent on location)"
- PTO speed
- 1,000 PTO rpm at 2000 engine rpm"
REAR AXLE
- Type
- Standard: Rack-and-pinion, double flat, or flange axlesOptional: short, double flat axle with single taper hub: Diameter: 120 x 2550 mm4.72 x 100.4 in.Long, double flat axle with single taper hub: Diameter: 120 x 3010 mm4.72 x 118.5 in."
- Final drive type
- Inboard planetary three pinion
- Rear differential lock
- Full-locking electrohydraulic
FRONT AXLE
- Type
- Standard: ILSOptional: 1500 Series MFWD
- Front axle differential lock
- 1500 Series MFWD: Full-locking electrohydraulicILS: Full-locking electrohydraulic
TIRES
- Wheel tread range
- 1500 Series MFWD: 1524-3657 mm60-144 in.ILS: 1524-3657 mm
- Turning radius without brakes
- ILS with 380/80R38 group 43 tires at 152.4-cm (60-in.) spacing: 5.77 m18.9 ftILS with 600/70R30 group 43 tires at 187-cm (74-in.) spacing: 6.14 m20.1 ft
- Central Tire Inflation System (CTIS)
- Optional
STEERING
- Type
- Standard: Hydraulic power-steering with electric pump back-upOptional: ActiveCommand Steering 2 (ACS™ 2) with electronic backup pump
ELECTRICAL SYSTEM
- Alternator size
- Standard: 200 ampOptional: 330 amp
- Battery options
- 12 V
- Working lights
- Standard: 18 halogenAvailable: 18 LED22 LED
- Type of bulb in headlight (Halogen, Zenon, LE
- Standard: halogen, 65 WAvailable: LED"
- Total cold cranking amps
- 1,850 CCA"
OPERATOR STATION
- Seat
- Degree of seat swivel, left hand25 degree (angle)Degree of seat swivel, right hand40 degree (angle)Standard: air suspensionOptional: ActiveSeat™ II"
- Cab suspension
- Optional
- Instructional seat
- Standard
- Display
- Standard: 4600 Generation 4 CommandCenter™: 25.4 cm10 in.
- Radio
- Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna"
- Inner cab volume
- 3.24 m3114 cu ft
- Cab glass area
- 6.52 m270.18 sq ft
DIMENSIONS
- Wheelbase
- MFWD: 3,080 mm121.3 in.ILS: 3,050 mm120.1 in."
- Overall length
- 6,636 mm261.3 in."
- Drawbar clearance
- 376 mm14.8 in.
- Front axle center
- MFWD: 686 mm27 in.ILS: 590 mm23.2 in.
WEIGHT
- Base machine weight
- ILS™/e23: 12,700 kg28,000 lb"
- Maximum ballast level
- 20,000 kg44,100 lb"
- Maximum permissible weight
- 20,000 kg44,100 lb"
CAPACITIES
- Crankcase oil volume
- 1500 MFWD: 27.6 L7.3 U.S. gal.ILS: 25.8 L6.8 U.S. gal.
- Fuel tank
- 727 L192 U.S. gal.CTIS: 651 L172 U.S. gal.
- Diesel exhaust fluid (DEF) tank
- 37.2 L9.8 U.S. gal.
- Cooling system
- 42.3 L11.2 U.S. gal.
- Transmission-hydraulic system
- 1500 MFWD: 184.6 L48.8 U.S. gal.ILS: 207.2 L54.7 U.S. gal.
SERVICEABILITY
- Interval for engine oil change
- 500 hours
- Interval for hydraulic/transmission oil chang
- 1,500 hours"
- Interval for engine coolant change
- 6,000 hours"
LOADERS
- Loader
- H480
- Lift capacity at full height
- 2,486 kg5469 lbmeasured at 800 mm (31.5 in.) ahead of pivot"
- Maximum lift height
- 4735 mm186 in.
- Guidance
- Integrated AutoTrac™
- Telematic
- JDLink™ hardware standard, activations, and Ethernet harnesses (availability dependent upon destination)"
- Remote diagnostics
- JDLink hardware standard
ADDITIONAL INFORMATION
- Date collected
- 22-Jan-21
About John Deere Tractor
The 8R 410 tractor is part of the John Deere's 8R Series. The 8R 410 is a kind of Row-Crop Tractors and that is often used for Agriculture Tractors operations. The 8R 410 tractor is operated by a 310 horsepower engine. This configuration gives better real-world usability.
Row-Crop Tractors
