John Deere 8R 410 Tractor (2021)

Manufacturer:John Deere

Price:492,755(USD)

Series:8R Series

Model:8R 410

Equipment Type: Row-Crop Tractors

Factory:Waterloo, Iowa, USA

Full Specifications

KEY SPECS

Engine description: John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)

KEY SPECS

Engine displacement: 9 L549 cu in.
Rated engine power: ECE-R120: 302 kW410 hp
Maximum engine power: ECE-R120: 326 kW443 hp
Rated PTO power (hp SAE): 231 kW310 hp
Transmission type: Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h (24.9 mph)Optional: e23 PowerShift with Efficiency Manager 50K, 50 km/h (31 mph)"
Hydraulic pump rated output: Standard: 85-cc pump: 227.1 L/min60 gpmOptional: 85-cc plus 35-cc dual pump: 318 L/min84 gpm
Rear hitch category (SAE designation): Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg20,000 lbOptional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg15,000 lb"
Base machine weight: ILS™/e23: 12,700 kg28,000 lb"

ENGINE SPECIFICATIONS

Description: John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)
Engine type: Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head"
Engine family: MJDXL09.0333
Rated speed: 2100 rpm
Aspiration: Dual turbochargers, variable geometry turbo with fixed geometry turbo in series; air-to-air aftercooling and cooled exhaust gas recirculation"
Cylinders liners: Wet-sleeve
Emission level: Final Tier 4
After treatment type: Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Displacement: 9 L549 cu in.

ENGINE PERFORMANCE

Rated power: ECE-R120: 302 kW410 hp
Rated PTO power (hp SAE): 231 kW310 hp
Power boost: 8 percent
Maximum engine power: ECE-R120: 326 kW443 hp
Engine peak torque: At 1600 rpm: 1851 Nm1365 lb-ft
PTO torque rise: 40 percent

TRANSMISSION

Type: Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h24.9 mphOptional: e23 PowerShift with Efficiency Manager 50K, 50 km/h31 mph"

HYDRAULIC SYSTEM

Type: Closed-center, pressure/flow compensated system with load sensing"
Pump rated output: Standard: 85-cc pump: 227.1 L/min60 gpmOptional: 85-cc plus 35-cc dual pump: 318 L/min84 gpm
Available flow at a single rear SCV: 1.3-cm (1/2-in.) couplers: 132 L/min35 gpm1.9-cm (3/4-in.) coupler: 159 L/min42 gpm
Available flow at front SCVs: 96 L/min25 gpm
Number of rear selective control valves (SCVs: Standard: 1.3-cm (1/2-in.) ISO couplers: 4Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available1.9-cm (3/4-in.) ISO coupler: 1
SCV control: Electronic

REAR HITCH

Hitch category (SAE designation): Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg20,000 lbOptional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg15,000 lb"
Maximum lift capacity behind lift points: Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg26,729 lb"
Sensing type: Electrohydraulic
Rear axle differential lock: Electrohydraulic

DRAWBAR

Drawbar category: Standard: Category 4Optional: Category 4 with heavy-duty support
Maximum vertical load: Dependent on drawbar position: 1837 to 2700 kg4050 to 6000 lbOptional: 2,245 kg4,950 lb4,990 kg11,000 lb"

REAR POWER TAKE-OFF (PTO)

Type: IndependentStandard: 44 mm (1.75 in.) 20-spline, 1,000 rpmOptional: 44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm"
Engine rpm (at rated PTO speeds): e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm"
Multispeed PTO option availability: Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable"
PTO actuation: Electrohydraulic with adjustable modulation

FRONT HITCH

Category: Category 3N
Standard lift capacity: Category 3N ground-engaging front hitch: 5200 kg11,464 lb"
Front power take-off (PTO): 44 mm (1.75 in.) 20 spline, 1000 rpm35 mm (1.375 in.) 21 spline, 1000 rpm35 mm (1.375 in.) 6 spline, 1000 rpm (available dependent on location)"
PTO speed: 1,000 PTO rpm at 2000 engine rpm"

REAR AXLE

Type: Standard: Rack-and-pinion, double flat, or flange axlesOptional: short, double flat axle with single taper hub: Diameter: 120 x 2550 mm4.72 x 100.4 in.Long, double flat axle with single taper hub: Diameter: 120 x 3010 mm4.72 x 118.5 in."
Final drive type: Inboard planetary three pinion
Rear differential lock: Full-locking electrohydraulic

FRONT AXLE

Type: Standard: ILSOptional: 1500 Series MFWD
Front axle differential lock: 1500 Series MFWD: Full-locking electrohydraulicILS: Full-locking electrohydraulic

TIRES

Wheel tread range: 1500 Series MFWD: 1524-3657 mm60-144 in.ILS: 1524-3657 mm
Turning radius without brakes: ILS with 380/80R38 group 43 tires at 152.4-cm (60-in.) spacing: 5.77 m18.9 ftILS with 600/70R30 group 43 tires at 187-cm (74-in.) spacing: 6.14 m20.1 ft
Central Tire Inflation System (CTIS): Optional

STEERING

Type: Standard: Hydraulic power-steering with electric pump back-upOptional: ActiveCommand Steering 2 (ACS™ 2) with electronic backup pump

ELECTRICAL SYSTEM

Alternator size: Standard: 200 ampOptional: 330 amp
Battery options: 12 V
Working lights: Standard: 18 halogenAvailable: 18 LED22 LED
Type of bulb in headlight (Halogen, Zenon, LE: Standard: halogen, 65 WAvailable: LED"
Total cold cranking amps: 1,850 CCA"

OPERATOR STATION

Seat: Degree of seat swivel, left hand25 degree (angle)Degree of seat swivel, right hand40 degree (angle)Standard: air suspensionOptional: ActiveSeat™ II"
Cab suspension: Optional
Instructional seat: Standard
Display: Standard: 4600 Generation 4 CommandCenter™: 25.4 cm10 in.
Radio: Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna"
Inner cab volume: 3.24 m3114 cu ft
Cab glass area: 6.52 m270.18 sq ft

DIMENSIONS

Wheelbase: MFWD: 3,080 mm121.3 in.ILS: 3,050 mm120.1 in."
Overall length: 6,636 mm261.3 in."
Drawbar clearance: 376 mm14.8 in.
Front axle center: MFWD: 686 mm27 in.ILS: 590 mm23.2 in.

WEIGHT

Base machine weight: ILS™/e23: 12,700 kg28,000 lb"
Maximum ballast level: 20,000 kg44,100 lb"
Maximum permissible weight: 20,000 kg44,100 lb"

CAPACITIES

Crankcase oil volume: 1500 MFWD: 27.6 L7.3 U.S. gal.ILS: 25.8 L6.8 U.S. gal.
Fuel tank: 727 L192 U.S. gal.CTIS: 651 L172 U.S. gal.
Diesel exhaust fluid (DEF) tank: 37.2 L9.8 U.S. gal.
Cooling system: 42.3 L11.2 U.S. gal.
Transmission-hydraulic system: 1500 MFWD: 184.6 L48.8 U.S. gal.ILS: 207.2 L54.7 U.S. gal.

SERVICEABILITY

Interval for engine oil change: 500 hours
Interval for hydraulic/transmission oil chang: 1,500 hours"
Interval for engine coolant change: 6,000 hours"

LOADERS

Loader: H480
Lift capacity at full height: 2,486 kg5469 lbmeasured at 800 mm (31.5 in.) ahead of pivot"
Maximum lift height: 4735 mm186 in.
Guidance: Integrated AutoTrac™
Telematic: JDLink™ hardware standard, activations, and Ethernet harnesses (availability dependent upon destination)"
Remote diagnostics: JDLink hardware standard

ADDITIONAL INFORMATION

Date collected: 22-Jan-21

About John Deere Tractor

The John Deere 8R 410 tractor is part of the 8R Series of tractors. The 8R 410 is a type of Row-Crop Tractors and is majorly used for Agriculture Tractors applications. The engine of the 8R 410 tractor offers 310 horsepower. This setting more efficiency in the actual world.