Deutz-Fahr DX 3.10 Tractor (1990)

Manufacturer:Deutz-Fahr

Price:N/A

Series:DX 3 Series

Model:DX 3.10

Equipment Type: Utility Tractors

Factory:Germany

Full Specifications

DEUTZ-FAHR DX 3.10 POWER

Engine: 46hp / 34.3kW

ENGINE DETAIL

Description: Deutz F3L 912 diesel 3-cylinder air-cooled
Displacement: 172.50ci / 2.8L
Bore/Stroke: 3.94x4.71inches / 100x 120mm
Power: 46hp / 34.3kW
Rated RPM: 2150
Oil capacity: 8.5qts / 8.0L

DEUTZ-FAHR DX 3.10 ENGINE

Description: Deutz 2.8L 3-cyl diesel

TRANSMISSIONS OVERVIEW

Description: 8-speed partially synchronized 12-speed partially synchronized 16-speed two-speed power shift 24-speed two-speed power shift

TRANSMISSION 1

Type: partially synchronized
Gears: 8 forward and 4 reverse
Clutch: dry disc
Oil capacity: 21.1qts / 20.0L
Description: Four synchronized gears (1-4) in two ranges (low/high) plus reverse range

TRANSMISSION 2

Type: partially synchronized
Gears: 12 forward and 4 reverse
Clutch: dry disc
Description: Four synchronized gears (1-4) in three ranges (creeper/low/high) plus reverse range

TRANSMISSION 3

Transmission: Dual-Split
Type: two-speed power shift
Gears: 16 forward and 8 reverse
Clutch: dry disc
Description: Dual-split adds a two-speed high/low shift to the basic transmission. Four gears in two forward ranges and one reverse range

TRANSMISSION 4

Transmission: Dual-Split
Type: two-speed power shift
Gears: 24 forward and 8 reverse
Clutch: dry disc
Description: Dual-split adds a two-speed high/low shift to the basic transmission. Four gears in three forward ranges and one reverse range

MECHANICAL

Chassis: 4x2 2WD/4x4 MFWD 4WD
Differential lock: mechanical rear
Steering: power
Brakes: mechanical drum
Cab: Four-post ROPS with canopy
Transmissions: 8-speed partially synchronized 12-speed partially synchronized 16-speed two-speed power shift 24-speed two-speed power shift

CAPACITY

Fuel: 19.8gal / 74.9L
Hydraulic system: 4gal / 15.1L 7.5gal / 28.4L

HYDRAULICS

Type: open center
Capacity: 4gal / 15.1L 7.5gal / 28.4L
Pressure: 2538psi / 175.0bar
Rear valves: 1 to 3
Front valves: 2
Pump flow: 9.8gpm / 37.1lpm

TRACTOR HITCH

Rear Type: I
Control: position and draft control
Rear lift: 4189lbs / 1900kg
Front Hitch: II

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 540 (1.375)
Front PTO: independent
Clutch: dry disc
Front RPM: 1000

DEUTZ-FAHR DX 3.10 TIRES

2WD Standard tires (ag): Front: 7.50x16. Rear: 14.9x28
4WD Standard tires (ag): Front: 10.5x20. Rear: 14.9x28
2WD Optional tires (ag): Front: 7.50x16. Rear: 16.9x24

DIMENSIONS

2WD Wheelbase: 79inches / 200cm
4WD Wheelbase: 82inches / 208cm
Length: 140.2inches / 356cm
Width: 82.3inches / 209cm
Height (ROPS): 88.5inches / 224cm
2WD Weight: 5776lbs / 2619kg
4WD Weight: 6173lbs / 2800kg
Rear tread: 59 to 75inches / 149to 190cm

DIMENSIONS & TIRES

2WD Wheelbase: 79inches / 200cm
4WD Wheelbase: 82inches / 208cm
Weight: 5776 to 6173 pounds
Front tire: 7.50x16
2WD Rear tire: 14.9x28

About Deutz-Fahr Tractor

The DX 3.10 model tractor belongs to the Deutz-Fahr DX 3 Series. The DX 3.10 is classified as a Utility Tractors and that is mostly used for Agriculture Tractors purposes. The DX 3.10 tractor is powered by a engine. This setup enhances real-world usefulness.