Farmall 230 Tractor (1958)
Manufacturer:Farmall
Price:2,100(USD)
Series:
Model:230
Equipment Type: Row-Crop Tractors
Factory:Louisville, Kentucky, USA
Full Specifications
NEBRASKA TRACTOR TEST 616 2
- Description
- Gasoline 4-speed 2WD April 25, 1957 - Link: Nebraska Tractor Test 616 file Drawbar performance Gear 2 used for power test Gear 1 used for pull test.
- Belt power (max)
- 28.06hp / 20.9kW
- Belt fuel use (max)
- 2.4gal/hour / 9.1 l/hour
- Max power
- 25.00hp / 18.6kW
- Max pull
- 3,574lbs / 1621kg
FARMALL 230 POWER
- Drawbar (claimed)
- 20.0hp / 14.9kW
- PTO (claimed)
- 24.95hp / 18.6kW
- Drawbar (tested)
- 25.00hp / 18.6kW
- Belt (tested)
- 28.06hp / 20.9kW
ENGINE DETAIL
- Description
- International Harvester C123 gasoline 4-cylinder liquid-cooled vertical I-head
- Displacement
- 122.7ci / 2.0L
- Bore/Stroke
- 3.125x4.00inches / 79 x 102mm
- Compression
- 6.94:1
- Rated RPM
- 1800
- Firing order
- 1-3-4-2
- Starter volts
- 6
- Oil capacity
- 5qts / 4.7L
- Coolant capacity
- 15qts / 14.2L
FARMALL 230 ENGINE
- Description
- International Harvester 2.0L 4-cyl gasoline
- Fuel tank
- 11gal / 41.6L
TRANSMISSIONS OVERVIEW
- Description
- 4-speed sliding gear 4-speed creeper
TRANSMISSION 1
- Type
- sliding gear
- Gears
- 4 forward and 1 reverse
TRANSMISSION 2
- Transmission
- Hydra-Creeper
- Type
- creeper
- Gears
- 4 forward and reverse
- Description
- The Hydra-Creeper unit consisted of a hydraulic motor that attached to the tractor's PTO shaft. The motor was powered from the tractor's hydraulics and drove the tractor through the PTO shaft.
MECHANICAL
- Chassis
- 4x2 2WD
- Steering
- manual
- Brakes
- differential mechanical dry disc
- Cab
- Open operator station.
- Transmissions
- 4-speed sliding gear/4-speed creeper
POWER TAKE-OFF (PTO)
- Rear RPM
- 540
FARMALL 230 TIRES
- Ag front
- 5.00-15
- Ag rear
- 11.2-36
DIMENSIONS
- Operating weight
- 3440lbs / 1560kg
- Ballasted weight
- 5331lbs / 2418kg
DIMENSIONS & TIRES
- Weight
- 3440lbs / 1560kg
- Front tire
- 5.00-15
- Rear tire
- 11.2-36
230 SERIAL NUMBERS
- Location
- Right side of clutch housing
- 1956
- 501
- 1957
- 815
- 1958
- 6827
- Final
- 7671
BELT PULLEY
- Diameter
- 8inches / 20cm
- Width
- 6inches / 15cm
- RPM
- 1,487
- Speed
- 3,114ft/min / 949.15meters/min
Row-Crop Tractors
