Ford 2810 Tractor (1990)
Manufacturer:Ford
Price:16,000(USD)
Series:10 Utility Series
Model:2810
Equipment Type: Utility Tractors
Factory:
Full Specifications
NEBRASKA TRACTOR TEST 1573 2
- Description
- Diesel 8-speed 2WD September 6 - 11, 1985 Link: Nebraska Tractor Test 1573 file PTO performance Drawbar performance Gear 5 used for power test. Gear 2 used for pull test
- Power at rated engine speed
- 32.83hp / 24.5kW
- Fuel use
- 2.2gal/hour / 8.3l/hour
- Power at rated PTO speed
- 31.82hp / 23.7kW
- Max power
- 28.19hp / 21.0kW
- Max pull
- 4,036lbs / 1830kg
FORD 2810 POWER
- Engine (gross)
- 36.5hp / 27.2kW
- Engine
- 34.3hp / 25.6kW
- PTO (claimed)
- 32hp / 23.9kW
- Drawbar (tested)
- 28.19hp / 21.0kW
- PTO (tested)
- 32.83hp / 24.5kW
ENGINE DETAIL
- Description
- Ford diesel 3-cylinder liquid-cooled
- Displacement
- 158ci / 2.6L
- Bore/Stroke
- 4.20x3.80inches / 107x 97 mm
- Power
- 34.3hp / 25.6kW
- Power (gross)
- 36.5hp / 27.2kW
- Air cleaner
- dual paper elements
- Compression
- 17.3:1
- Rated RPM
- 2000
- Torque
- 101 lb-ft /137.0 Nm
- Torque RPM
- 1400
- Starter volts
- 12
- Oil capacity
- 7 qts /6.6 L
- Coolant capacity
- 11qts / 10.4L
FORD 2810 ENGINE
- Description
- Ford 2.6L 3-cyl diesel
TRANSMISSIONS OVERVIEW
- Description
- 8-speed 6-speed mechanical shuttle
TRANSMISSION 1
- Transmission
- Dual Range
- Gears
- 8 forward and 2 reverse
- Clutch
- 330mm dry disc
- Oil capacity
- 12.7qts / 12.0L
SPEEDS 1
- Description
- With 13.6x28 rear tires
TRANSMISSION 2
- Type
- mechanical shuttle
- Gears
- 6 forward and 4 reverse
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD
- Final drives
- inboard planetary
- Differential lock
- mechanical rear
- Steering
- manual/power assist
- Brakes
- differential wet disc
- Cab
- Two-post fixed ROPS.
- Transmissions
- 8-speed/6-speed mechanical shuttle
CAPACITY
- 2WD Fuel
- 13gal / 49.2L
- 4WD Fuel
- 16gal / 60.6L
- Hydraulic system
- 12.1gal / 45.8L
- Steering
- 3.6qts / 3.4L
HYDRAULICS
- Type
- open center
- Capacity
- 12.1gal / 45.8L
- Pressure
- 2500psi / 172.4bar
- Pump flow
- 7.7gpm / 29.1lpm
- Steering cap.
- 3.6qts / 3.4L
TRACTOR HITCH
- Rear Type
- I
- Control
- position and draft control
- Rear lift
- 2936lbs / 1331kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540
- Engine RPM
- 540@1800
FORD 2810 TIRES
- 2WD Standard tires (ag)
- Front: 6.00-16. Rear: 13.6-28
- 4WD Standard tires (ag)
- Front: 8.3-24. Rear: 13.6-28
DIMENSIONS
- 2WD Wheelbase
- 77.5inches / 196cm
- 4WD Wheelbase
- 84.1inches / 213cm
- Length
- 127.2inches / 323cm
- Width
- 68.4inches / 173cm
- 2WD Operating weight
- 4420lbs / 2004kg
- 4WD Operating weight
- 4995lbs / 2265kg
- 2WD Clearance (front axle)
- 21.5inches / 54cm
- 4WD Clearance (front axle)
- 13.1inches / 33cm
- Clearance (rear axle)
- 20.5inches / 52cm
- 2WD Front tread
- 52 to 80inches / 132to 203 cm
- 4WD Front tread
- 56 to 72inches / 142to 182 cm
- Rear tread
- 56 to 80inches / 142to 203 cm
FORD 2810 HEIGHT
- Hood
- 58.8inches / 149cm
- ROPS
- 93.7inches / 237cm
- Exhaust
- 81.2inches / 206cm
DIMENSIONS & TIRES
- 2WD Wheelbase
- 77.5inches / 196cm
- 4WD Wheelbase
- 84.1inches / 213cm
- Weight
- 4420 to 4995 pounds
- Front tire
- 6.00-16
- 2WD Rear tire
- 13.6-28
FORD 776A LOADER
- Loader weight
- 1035lbs / 469kg
- Height (to pin)
- 124inches / 314cm
- Clearance, dumped bucket
- 102inches / 259cm
- Dump reach
- 26inches / 66cm
- Dump angle
- 40°
- Reach at ground
- 75inches / 190cm
- Rollback angle
- 6°
- Breakout force (lift)
- 3750lbs / 1701kg
- Lift to full height (at pin)
- 2500lbs / 1134kg
- Bucket width
- 48inches / 121cm/60inches / 152cm/72inches / 182cm
FORD 776B LOADER
- Loader weight
- 1260lbs / 571kg
- Height (to pin)
- 124inches / 314cm
- Clearance, dumped bucket
- 102inches / 259cm
- Dump reach
- 26inches / 66cm
- Dump angle
- 40°
- Reach at ground
- 75.2inches / 191cm
- Rollback angle
- 6°
- Breakout force (lift)
- 3750lbs / 1701kg
- Lift to full height (at pin)
- 2500lbs / 1134kg
- Bucket width
- 48inches / 121cm/60inches / 152cm/72inches / 182cm
FORD 776F LOADER
- Loader weight
- 1469lbs / 666kg
- Height (to pin)
- 120inches / 304cm
- Clearance, dumped bucket
- 94inches / 238cm
- Dump reach
- 36inches / 91cm
- Breakout force (lift)
- 4300lbs / 1950kg
- Lift to full height (at pin)
- 2500lbs / 1134kg
2810 SERIAL NUMBERS
- Location
- Identification plate inside the engine compartment
- 1983
- C694500
- 1984
- C707400
- 1985
- C732600
- 1986
- BA74292
- 1987
- BB05681
- 1988
- BB31777
- 1989
- BB80620
- 1990
- BC26239
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Mk I Charging amps
- 32
- Mk II Charging amps
- 51
- Battery volts
- 12
- Battery AH
- 51
About Ford Tractor
The Ford 2810 tractor is part of the 10 Utility Series. The 2810 is classified as a Utility Tractors and is majorly used for Agriculture Tractors activities. The 2810 tractor is powered by a engine. This arrangement improves usability in the real world scenario.
