Ford 6710 Tractor (1987)
Full Specifications
NEBRASKA TRACTOR TEST 1430 2
- Description
- Diesel 16x4 4WD April 1 - 21, 1982 Link: Nebraska Tractor Test 1430 file PTO performance Drawbar performance Gear 6L used for power test. Gear 3L used for pull test
- Power at rated engine speed
- 72.13hp / 53.8kW
- Fuel use
- 4.5gal/hour / 17.0l/hour
- Power at rated PTO speed
- 68.27hp / 50.9kW
- Max power
- 60.96hp / 45.5kW
- Max pull
- 7,887lbs / 3577kg
NEBRASKA TRACTOR TEST 1431 2
- Description
- Diesel 16x8 2WD April 13 - May 4, 1982 Link: Nebraska Tractor Test 1431 file PTO performance Drawbar performance Gear 6L used for power test. Gear 3L used for pull test
- Power at rated engine speed
- 72.30hp / 53.9kW
- Fuel use
- 4.7gal/hour / 17.8l/hour
- Power at rated PTO speed
- 15.43hp / 11.5kW
- Max power
- 61.37hp / 45.8kW
- Max pull
- 7,948lbs / 3605kg
FORD 6710 POWER
- Engine (gross)
- 82hp / 61.1kW
- Engine
- 78.5hp / 58.5kW
- PTO (claimed)
- 72hp / 53.7kW
- Drawbar (tested)
- 61.37hp / 45.8kW
- PTO (tested)
- 72.30hp / 53.9kW
ENGINE DETAIL
- Description
- Ford diesel 4-cylinder liquid-cooled
- Displacement
- 268ci / 4.4L
- Bore/Stroke
- 4.4094x4.4094inches / 112x 112 mm
- Power
- 78.5hp / 58.5kW
- Power (gross)
- 82hp / 61.1kW
- Compression
- 16.3:1
- Rated RPM
- 2100
- Torque
- 219 lb-ft /297.0 Nm
- Starter volts
- 12
- Oil capacity
- 9 qts /8.5 L
- Coolant capacity
- 14.5qts / 13.7L
FORD 6710 ENGINE
- Description
- Ford 4.4L 4-cyl diesel
TRANSMISSIONS OVERVIEW
- Description
- 16-speed partial power shift 16-speed synchromesh partial power shift
TRANSMISSION 1
- Transmission
- Dual Power
- Type
- partial power shift
- Gears
- 16 forward and 4 reverse
- Description
- The Dual Power adds a shift-on-the-move to an under-speed on the basic 8/2 gear transmission.
SPEEDS 1
- Description
- With 18.4x34 rear tires
TRANSMISSION 2
- Transmission
- Dual Power
- Type
- synchromesh partial power shift
- Gears
- 16 forward and 8 reverse
- Description
- A shift-on-the-move under-speed added to the 8/4 synchromesh transmission.
SPEEDS 2
- Description
- With 18.4x34 rear tires
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD
- Steering
- power assist
- Brakes
- differential mechanical wet disc
- Cab
- Two-post ROPS. Cab optional.
- Transmissions
- 16-speed partial power shift/16-speed synchromesh partial power shift
CAPACITY
- Fuel
- 28gal / 106.0L
- Hydraulic system
- 15gal / 56.8L
HYDRAULICS
- Type
- open center
- Capacity
- 15gal / 56.8L
- Valves
- 1
- Pump flow
- 9.7gpm / 36.7lpm
- Steering flow
- 3.6gpm / 13.6lpm
- Steering press.
- 2500psi / 172.4bar
TRACTOR HITCH
- Rear Type
- II
- Rear lift (at 24
- 4,137lbs / 1876kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540/540/1000 (optional)
FORD 6710 TIRES
- Ag front
- 7.50-15 (2WD)
- Ag rear
- 18.4-30/16.9-34/18.4-34/16.9-38
DIMENSIONS
- Wheelbase
- 101.6inches / 258cm
- Length
- 152.5inches / 387cm
- Width
- 76.9inches / 195cm
- Height (ROPS)
- 111inches / 281cm
- Height (cab)
- 114.6inches / 291cm
- Shipping weight
- 6,344lbs / 2877kg
- Ballasted weight
- 9,700lbs / 4399kg
- Ground clearance
- 20.7inches / 52cm/24.8inches / 62cm (optional front axle)
- Front tread
- 58.5 to 86.5inches / 148to 219 cm
- Rear tread
- 56 to 90inches / 142to 228 cm (power)
DIMENSIONS & TIRES
- Wheelbase
- 101.6inches / 258cm
- Weight
- 6,344lbs / 2877kg
- Front tire
- 7.50-16
- Rear tire
- 15.5-38
ATTACHMENT OVERVIEW
- Description
- Three loaders were available. The 777B was available for two-wheel drive tractors. The 777D could be fitted to 2WD models with ROPS. The 777F loader fit four-wheel drive tractors with ROPS or cab.
FORD 777B LOADER
- Loader weight
- 1390lbs / 630kg
- Height (to pin)
- 124inches / 314cm
- Clearance, dumped bucket
- 100inches / 254cm
- Dump reach
- 44.9inches / 114cm
- Dump angle
- 47°
- Reach at ground
- 76inches / 193cm
- Rollback angle
- 14°
- Breakout force (lift)
- 4550lbs / 2063kg
- Lift to full height (at pin)
- 2500lbs / 1134kg
- Bucket width
- 48inches / 121cm/60inches / 152cm/72inches / 182cm
FORD 777D LOADER
- Loader weight
- 1415lbs / 641kg
- Height (to pin)
- 125.2inches / 318cm
- Clearance, dumped bucket
- 100inches / 254cm
- Dump reach
- 33.9inches / 86cm
- Dump angle
- 47°
- Reach at ground
- 68.1inches / 172cm
- Rollback angle
- 14°
- Breakout force (lift)
- 5500lbs / 2494kg
- Lift to full height (at pin)
- 2900lbs / 1315kg
- Bucket width
- 48inches / 121cm/60inches / 152cm/72inches / 182cm
FORD 777F LOADER
- Loader weight
- 1636lbs / 742kg
- Height (to pin)
- 120.9inches / 307cm
- Clearance, dumped bucket
- 98inches / 248cm
- Dump reach
- 40.2inches / 102cm
- Dump angle
- 40°
- Reach at ground
- 74inches / 187cm
- Rollback angle
- 13°
- Breakout force (lift)
- 4800lbs / 2177kg
- Lift to full height (at pin)
- 2900lbs / 1315kg
- Bucket width
- 48inches / 121cm/60inches / 152cm/72inches / 182cm
6710 SERIAL NUMBERS
- Location
- On plate inside engine compartment and one right-front of transmission.
- 1982
- C681910
- 1983
- C695880
- 1984
- C713459
- 1985
- C737800
- 1986
- BA80100
- 1987
- BB06622
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 32
- Battery volts
- 12
- Battery AH
- 128
About Ford Tractor
The 6710 model tractor belongs to the 10 Series of tractors from Ford. The 6710 is a Row-Crop Tractors type, which is used most often in Agriculture Tractors. The engine of the 6710 tractor offers . This setting improves usability in the real world situation.
Row-Crop Tractors
