J.I. Case 4994 Tractor (1984)

Manufacturer:J.I. Case

Price:132,050(USD)

Series:4WD 94 Series

Model:4994

Equipment Type: Four-wheel Drive 4WD Tractors

Factory:Racine, Wisconsin, USA

Full Specifications

NEBRASKA TRACTOR TEST 1530 2

Description: Diesel 12-speed 4WD June 9 - 27, 1984 Link: Nebraska Tractor Test 1530 file PTO performance Drawbar performance Gear 6 used for power test Gear 2 used for pull test
Power at rated engine speed: 344hp / 256.5kW
Fuel use: 20.1gal/hour / 76.1l/hour
Max power: 294.24hp / 219.4kW
Max pull: 34,519lbs / 15657kg

J.I. CASE 4994 POWER

Engine: 400hp / 298.3kW
PTO (claimed): 344hp / 256.5kW
Drawbar (tested): 294.24hp / 219.4kW
PTO (tested): 344hp / 256.5kW

ENGINE DETAIL

Description: Saab-Scania turbocharged diesel 8-cylinder liquid-cooled
Displacement: 866ci / 14.2L
Bore/Stroke: 5.00x5.51inches / 127x 140mm
Power: 400hp / 298.3kW
Air cleaner: dual paper elements
Compression: 15.5:1
Rated RPM: 2100
Torque: 1140lb-ft / 1545.8Nm
Torque RPM: 1300
Firing order: 1-5-4-2-6-3-7-8
Starter volts: 12
Coolant capacity: 88qts / 83.3L
Intake valve clearance: 0.018inches / 0.457mm
Exhaust valve clearance: 0.031inches / 0.787mm

ENGINE OIL

Oil capacity: 27qts / 25.6L

J.I. CASE 4994 ENGINE

Description: Saab-Scania 14.2L 8-cyl diesel

TRANSMISSION

Type: full power shift
Gears: 12 forward and 2 reverse
Oil capacity: 63qts / 59.6L 59qts / 55.8L (without PTO) Case Powergard PTF
Description: Electronically-controlled Case powershift transmission operated with single control lever and inching pedal. The inching pedal must be depressed to move from park/neutral into first gear. Tractor must be moving in first gear before higher gears can be selected. Gear changes made by pushing control lever into upshift or downshift position. Control lever can be held in upshift/downshift position for multiple gear changes

SPEEDS

Description: With 20.5-32 tires

MECHANICAL

Chassis: 4x4 4WD
Steering: hydraulic, front, rear or four-wheel crab steering
Brakes: hydraulic dual caliper disc
Cab: Silent Guardian cab standard
Transmission: 12-speed full power shift

CAPACITY

Fuel: 300gal / 1135.5L
Hydraulic system: 26.25gal / 99.4L
Front hubs: 13.5qts / 12.8L (each)
Front diff.: 17qts / 16.1L
Rear hubs: 13.5qts / 12.8L (each)
Rear diff.: 22.5qts / 21.3L

HYDRAULICS

Type: closed center
Capacity: 26.25gal / 99.4L
Pressure: 2000psi / 137.9bar
Valves: 2 to 4
Pump flow: 35gpm / 132.5lpm
Total flow: 35gpm / 132.5lpm
Steering flow: 20gpm / 75.7lpm
Steering press.: 2000psi / 137.9bar

TRACTOR HITCH

Rear Type: IV/IVN (optional)
Rear lift (at 24: 16,000lbs / 7257kg

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 1000 (1.75)
Engine RPM: 1000@2100

J.I. CASE 4994 TIRES

Ag front: 20.8-38
Ag rear: 20.8-38 / 20.8-42 / 23.1-34 / 30.5-32

DIMENSIONS

Wheelbase: 124.8inches / 316cm
Length: 261.8inches / 664cm
Width: 120inches / 304cm
Height (exhaust): 138.5inches / 351cm
Clearance (drawbar): 14.5inches / 36cm

J.I. CASE 4994 WEIGHT

Shipping: 26500lbs / 12020kg
Operating: 31315lbs / 14204kg
Ballasted: 39930lbs / 18112kg
Max capacity: 40000lbs / 18144kg

DIMENSIONS & TIRES

Wheelbase: 124.8inches / 316cm
Weight: 26500 to 31315 pounds
Front tire: 24.5-32
Rear tire: 24.5-32

4994 SERIAL NUMBERS

Location: Data plates located at forward-right corner in top of the tractor cab
1984: 8865000

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 105
Batteries: 2
Battery volts: 12
Battery AH: 300
Battery Group: 30H

About J.I. Case Tractor

The 4994 model tractor belongs to the 4WD 94 Series of tractors from J.I. Case. The 4994 is classified as a Four-wheel Drive 4WD Tractors and that is mostly used for Agriculture Tractors purposes. A engine powers the 4994 tractor. This arrangement is more practical in the actual world.