John Deere 2520 Tractor (2011)

Manufacturer:John Deere

Price:N/A

Series:2000 Twenty Series

Model:2520

Equipment Type: Compact Utility Tractors

Factory:Augusta, Georgia, USA

Full Specifications

JOHN DEERE 2520 POWER

Engine (gross): 26.4hp / 19.7kW
PTO (claimed): 20.5hp / 15.3kW

ENGINE DETAIL

Description: Yanmar 3TNV82A diesel 3-cylinder liquid-cooled
Displacement: 81.2ci / 1.3L
Bore/Stroke: 3.23x3.31inches / 82x 84mm
Rated Power (EC 97/98): 26.4hp / 19.7kW
Compression: 19.2:1
Rated RPM: 2600
Torque: 51.3lb-ft / 69.6Nm
Torque RPM: 2600
Starter volts: 12
Oil capacity: 3.8qts / 3.6L
Coolant capacity: 4.1qts / 3.9L

JOHN DEERE 2520 ENGINE

Description: Yanmar 1.3L 3-cyl diesel

TRANSMISSION

Type: hydrostatic
Gears: infinite (2-range) forward and reverse
Oil capacity: 15.6qts / 14.8L

MECHANICAL

Chassis: 4x4 MFWD 4WD
Final drives: spur gear
Steering: power
Brakes: wet disc
Cab: Two-post folding ROPS
Transmission: hydrostatic

CAPACITY

Fuel: 7.1gal / 26.9L
Hydraulic system: 3.85gal / 14.6L
Front axle: 3.6qts / 3.4L

HYDRAULICS

Type: open center
Capacity: 3.85gal / 14.6L
Valves: 2
Pump flow: 5.0gpm / 18.9lpm
Total flow: 10.5gpm / 39.7lpm

TRACTOR HITCH

Rear Type: I
Control: position control
Rear lift (at ends): 1433lbs / 650kg
Rear lift (at 24: 1150lbs / 521kg

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 540
Mid PTO: standard
Mid RPM: 2100

JOHN DEERE 2520 TIRES

Lawn/turf front: 24x8.5-14
Lawn/turf rear: 36x14.00-15
Industrial front: 23x8.5-12
Industrial rear: 14-17.5

DIMENSIONS

Wheelbase: 65.2inches / 165cm
Length: 108.9inches / 276cm
Width: 39.2inches / 99cm (min) 52.6inches / 133cm (max)
Height (hood): 47.2inches / 119cm
Height (ROPS): 89.7inches / 227cm
Operating weight: 1865lbs / 845kg
Ground clearance: 12.5inches / 31cm
Clearance (front axle): 13inches / 33cm
Clearance (drawbar): 11inches / 27cm
Front tread: 32.7inches / 83cm
Rear tread: 37.6inches / 95cm

DIMENSIONS & TIRES

Wheelbase: 65.2inches / 165cm
Weight: 1865lbs / 845kg

ATTACHMENT OVERVIEW

Description: 62

62

Type: mid-mount John Deere 62D2 3-blade
Cutting width: 62inches / 157cm
Weight: 275lbs / 124kg
Overall width: 75.3inches / 191cm
Cut height: 1 to 6 inch /2 to 15 cm

72

Type: mid-mount John Deere 72/3-blade
Cutting width: 72inches / 182cm
Weight: 406lbs / 184kg
Overall width: 85inches / 215cm
Cut height: 1 to 9inch / 2 to 22cm

JOHN DEERE 200CX LOADER

Height (to pin): 78.5inches / 199cm
Clearance, dumped bucket: 72.2inches / 183cm
Dump reach: 29.5inches / 74cm
Dump angle: 38°
Rollback at ground: 25°
Rollback, raised: 105°
Breakout force (at pin): 2239lbs / 1015kg
Breakout force (at 500mm): 1515lbs / 687kg
Breakout force (bucket): 1702lbs / 772kg
Lift to full height (at pin): 902lbs / 409kg
Lift to full height (at 500mm): 629lbs / 285kg
Lift to 1.5m (at pin): 1124lbs / 509kg
Lift to 1.5m (at 500mm): 827lbs / 375kg
Bucket width: 53inches / 134cm
Raise time to height: 3.19 s
Bucket dump time: 3.19 s
Lowering time: 1.95 s
Rollback time: 1.95 s

JOHN DEERE 46 BACKHOE

Backhoe type: John Deere 46 Backhoe
Weight: 896lbs / 406kg
Transport height: 60inches / 152cm
2-Foot flat digging depth: 78inches / 198cm
Reach from pivot: 101inches / 256cm
Loading height: 60inches / 152cm
Bucket Rotation: 180
Swing Arc: 180
Bucket force: 2450lbs / 1111kg
Dipperstick force: 1250lbs / 567kg

2520 SERIAL NUMBERS

Location: On frame, right side, above front axle
2005: E100001 (EU)
2006: E286001 (EU)
2007: E386001 (EU)
2008: E486001 (EU)
2009: E586001 (EU)
2010: E686001 (EU)
2011: E710001 (EU)

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 20
Battery CCA: 500
Battery volts: 12

About John Deere Tractor

The 2520 model tractor is one of John Deere's 9R line of tractors. The 2520 is a kind of Compact Utility Tractors and is majorly used for Agriculture Tractors activities. A engine powers the 2520 tractor. This arrangement increases real-world efficiency.