John Deere 3032E Tractor (2008-2022)

Manufacturer:John Deere

Price:21,340(USD)

Series:3R Series

Model:3032E

Equipment Type: Compact Utility Tractors

Factory:Augusta, Georgia, USA

Full Specifications

KEY SPECS

Engine power (gross): 22.9 kW/31.2 hp
Power take-off (PTO) power: 18.6 kW/25 hp
Steering hydraulics: 15 L/min/4 gpm
Implement hydraulics: 20.2 L/min/5.3 gpm
Hitch type: Category 1
Lift capacity, 24-in. behind link arms: 615.1 kg/1356 lb
Standard transmission; forward/reverse: Hydrostatic transmission (HST)
Cruise control: Optional
Approximate shipping weight (open-station; cab): 1007.9 kg/2222 lb
Wheelbase: 159.5 cm/62.8 in.

ENGINE

Family: EYDXL1.64NDA/FYDXL1.64NDA/GYDXL1.64NDA
Manufacturer: Yanmar
Engine model: 3TNV88C-NJT
Engine power (gross): 22.9 kW/31.2 hp
Power take-off (PTO) power: 18.6 kW/25 hp
Rated engine speed: 2500 rpm
Type: Diesel
Injection pump type: High pressure common rail direct injection
Aspiration: Natural
Emissions compliance: Final Tier 4
Cylinders/displacement: 3 / 1.64 L/3 / 100.2 cu in.
Number of cylinders: Three
Cylinder liners: Cast-in-block
Bore and stroke: 88 x 90 mm/3.46 x 3.54 in.
Compression ratio: 19.1:1
Lubrication: Pressurized
Cooling system: Water pump
Air cleaner: Dual element
Engine torque at rated speed: 87 Nm/64.2 lb-ft
Fuel tank capacity: 28.5 L/7.5 U.S. gal.

ELECTRICAL

Battery size: 500 CCA
Alternator (12-V): 55 amp
Starter size: 1.4 kW/1.9 hp

FUEL SYSTEM

Type: High pressure common rail direct injection

TRANSMISSION

Standard transmission; forward/reverse: Hydrostatic transmission (HST)
Left-hand reverser: No
Final drive: Bull Gear
Brakes: Wet disc
Steering: Power steering
Axle capacity: Front/798 kg/1760 lb/Rear/1197 kg/2640 lb/
Creeper: No
Cruise control: Optional
Differential lock: Yes

HYDRAULICS

Type: Open center
Pump rated output: Steering/15 L/min/4 gpm/Implement/20.2 L/min/5.3 gpm/35.2 L/min/9.3 gpm
Pump type: Dual gear
Maximum operating pressure: 172.4 bar/2500 psi
Draft control sensing: Position control
Remote control valves available: Up to two (optional)

3-POINT HITCH

Type: Category 1
Lift capacity, 24-in. behind link arms: 615.1 kg/1356 lb

POWER TAKE-OFF (PTO)

Standard: 540 rpm at 2500 rpm
Control: Independent
Clutch: Wet disk
Brake (for mid and rear PTO): Wet disk

FLUID CAPACITIES

Crankcase with filter: 4.5 L/4.8 qt

FINAL DRIVE

Type: Bull Gear

OPERATOR STATION

Rollover protective structure: Type/Foldable/ASABE S478
Platform - flat/straddle: Semi-flat
Gear shift location - console/floor: Left-hand side

DIMENSIONS

Wheelbase: 159.5 cm/62.8 in.
Front axle clearance: 36.3 cm/14.3 in.
Turning radius without brakes: 2.9 m/9.4 ft
Approximate shipping weight (open-station; cab): 1007.9 kg/2222 lb

TIRES

Front: Farm - 7-14/Turf - 27x8.5-15/R4 - 25x8.5-14/R4 - 27x8.5-15
Rear: Farm - 11.2-24/Turf - 41x14-20/R4 - 15-19.5/R4 - 43x16-20

About John Deere Tractor

The John Deere 3032E tractor is part of the 3R Series of tractors. The 3032E is a Compact Utility Tractors type, which is used mostly in the Agriculture Tractors. The 3032E tractor is operated by a 25 horsepower engine. This arrangement improves usability in the real world situation.