John Deere 3043D Tractor (2019-)

Manufacturer:John Deere

Price:24,558(USD)

Series:3D Series

Model:3043D

Equipment Type: Compact Utility Tractors

Factory:

Full Specifications

KEY SPECS

Engine power (gross): 31 kW/41.6 hp
Power take-off (PTO) power: 27.1 kW/36.3 hp
Steering hydraulics: 16.8 L/min/4.4 gpm
Implement hydraulics: 22.4 L/min/5.9 gpm
Hitch type: Category 1
Lift capacity, 24-in. behind link arms: 944 kg/2081.2 lb
Standard transmission; forward/reverse: 8F/8R synchromesh shuttle shift gear transmission
Cruise control: No
Approximate shipping weight (open-station; cab): Open operator station (OOS): 1288 kg/2840 lb/Cab: Not applicable
Wheelbase: 1574 mm/62 in.

ENGINE

Manufacturer: Yanmar®
Engine model: 3TNV86CT-KJPT
Engine power (gross): 31 kW/41.6 hp
Power take-off (PTO) power: 27.1 kW/36.3 hp
Rated engine speed: 2800 rpm
Injection pump type: High pressure common rail direct injection
Aspiration: Turbocharged
Emissions compliance: Final Tier 4
Cylinders/displacement: 3 / 1.57 L/3 / 95.8 cu in.
Number of cylinders: Three
Cylinder liners: Cast-in-block
Bore and stroke: 86 x 90 mm/3.39 x 3.54 in.
Compression ratio: 19.1:1
Lubrication: Pressurized
Cooling system: Liquid
Air cleaner: Dual element
Engine torque at rated speed: 105.7 Nm/78 lb-ft
Fuel tank capacity: 36.7 L/9.7 U.S. gal.

ELECTRICAL

Battery size: 600 CCA
Alternator (12-V): 55 amp
Starter size: 1.4 kW/1.9 hp

FUEL SYSTEM

Type: High pressure common rail direct injection

TRANSMISSION

Standard transmission; forward/reverse: 8F/8R synchromesh shuttle shift gear transmission
Left-hand reverser: Yes
Transmission gear ranges: Four gears and two ranges
Final drive: Spur gear
Brakes: Wet disk
Steering: Power steering
Axle capacity: Front/880 kg/1940 lb/Rear/1600 kg/3527 lb/
Creeper: No
Cruise control: No
Differential lock: Yes

HYDRAULICS

Type: Open center
Pump rated output: Steering/16.8 L/min/4.4 gpm/Implement/22.4 L/min/5.9 gpm/39.2 L/min/10.3 gpm
Pump type: Single gear
Maximum operating pressure: 172 bar/2495 psi
Draft control sensing: Position control
Remote control valves available: Up to two (optional)

3-POINT HITCH

Type: Category 1
Lift capacity, 24-in. behind link arms: 944 kg/2081.2 lb

POWER TAKE-OFF (PTO)

Standard: At 2400 rpm: 540 rpm
Control: Mechanical
Clutch: Transmission
Brake (for mid and rear PTO): Wet disk

FLUID CAPACITIES

Crankcase with filter: 4.5 L/4.8 qt
Transmission and hydraulic system: 33 L/34.8 qt

FINAL DRIVE

Type: Spur gear

OPERATOR STATION

Rollover protective structure: Type/Foldable/ASABE S478
Platform - flat/straddle: Straddle
Gear shift location - console/floor: Right-hand side

DIMENSIONS

Wheelbase: 1574 mm/62 in.
Front axle clearance: Minimum: 331 mm/13 in./Maximum: 353 mm/13.9 in.
Turning radius with brakes: 1.63 m/5.3 ft
Approximate shipping weight (open-station; cab): OOS: 1288 kg/2840 lb/Cab: Not applicable

TIRES

Front: R1 Bar: 7-14/R3 Turf: 27x8.5-15/R4 Industrial: 25x8.5-14
Rear: R1 Bar: 11.2-24/R3 Turf: 41x14-20/R4 Industrial: 15-19.5

MISCELLANEOUS

Toolbox: Yes
Tilt steering wheel: No
12-V Outlet: No

About John Deere Tractor

The John Deere 3043D tractor is part of the 9R tractor series. The 3043D is a Compact Utility Tractors type, which is used most often in Agriculture Tractors. The 3043D tractor is equipped by a 36.3 horsepower engine. This configuration improves usability in the real world scenario.