Full Specifications
JOHN DEERE 4010 POWER
Engine (gross)
18.5hp / 13.8kW
PTO (claimed)
14hp / 10.4kW
ENGINE DETAIL
Description
Yanmar 3TNE68 diesel 3-cylinder liquid-cooled
Displacement
47.84ci / 0.8L
Bore/Stroke
2.68x2.83inches / 68x 72mm
Power (gross)
18.5hp / 13.8kW
Fuel system
indirect injection
Air cleaner
dry
Rated RPM
3000
Operating RPM
1300-3225
Starter volts
12
Oil capacity
2.1qts / 2.0L
Coolant capacity
2.5qts / 2.4L
JOHN DEERE 4010 ENGINE
Description
Yanmar 0.8L 3-cyl diesel
TRANSMISSION
Type
hydrostatic
Gears
infinite (2-range) forward and reverse
Oil capacity
10.4qts / 9.8L
MECHANICAL
Chassis
4x4 MFWD 4WD
Steering
hydrostatic power
Brakes
wet disc
Cab
Two-post ROPS
Transmission
hydrostatic
CAPACITY
Fuel
3.4gal / 12.9L
Hydraulic system
2.6gal / 9.8L
Front axle
3.6qts / 3.4L
HYDRAULICS
Type
open center
Capacity
2.6gal / 9.8L
TRACTOR HITCH
Rear Type
I
Rear lift (at 24
860lbs / 390kg
POWER TAKE-OFF (PTO)
Rear PTO
independent
Rear RPM
540
Mid RPM
2100
JOHN DEERE 4010 TIRES
Ag front
6-12
Ag rear
8-16
Lawn/turf front
22x9.00-12
Lawn/turf rear
29x12.50-15
Industrial front
5.70-12
Industrial rear
10-16.5
DIMENSIONS
Wheelbase
57.1inches / 145cm
Length
102inches / 259cm
Width
40.6inches / 103cm *Minimum 44.5inches / 113cm *Maximum
Height (hood)
44inches / 111cm
Height (ROPS)
78.4inches / 199cm
Weight
1420lbs / 644kg
Max Drawbar
562lbs / 254kg
Clearance (front axle)
9.8inches / 24cm
DIMENSIONS & TIRES
Wheelbase
57.1inches / 145cm
Weight
1420lbs / 644kg
Front tire
6-12
Rear tire
8-16
ATTACHMENT OVERVIEW
Description
54
54
Type
mid-mount John Deere 3-blade
Cutting width
54inches / 137cm
Weight
190lbs / 86kg
Overall width
57.9inches / 147cm
60
Type
mid-mount John Deere 3-blade
Cutting width
60inches / 152cm
Weight
325lbs / 147kg
Overall width
73.5inches / 186cm
JOHN DEERE 410 LOADER
Height (to pin)
74inches / 187cm
Clearance, dumped bucket
55.1inches / 139cm
Dump reach
24.8inches / 62cm
Dump angle
45°
Clearance, level bucket
67.8inches / 172cm
Reach at ground
44.6inches / 113cm
Breakout force (at pin)
2257lbs / 1023kg
Breakout force (at 500mm)
1500lbs / 680kg
Breakout force (bucket)
1661lbs / 753kg
Lift to full height (at pin)
882lbs / 400kg
Lift to full height (at 500mm)
618lbs / 280kg
Lift to 1.5m (at pin)
1072lbs / 486kg
Lift to 1.5m (at 500mm)
782lbs / 354kg
4010 SERIAL NUMBERS
Location
Serial number plate on right side above the tractor's front axle
2002
LV4010H100001
2003
LV4010H210001
2004
LV4010H310001
2005
LV4010H410001
ELECTRICAL
Ground
negative
Charging system
alternator
Charging amps
20
Battery CCA
435
Battery volts
12
The John Deere 4010 tractor is part of the 4000 Ten Compact Series of tractors. The 4010 is a Compact Utility Tractors and is majorly used for Agriculture Tractors production. The engine of the 4010 tractors is impressive. This setup is more practical in the real world.