John Deere 4052R Tractor 

Manufacturer:John Deere

Price:N/A

Series:4R Series

Model:4052R

Equipment Type: Compact Utility Tractors

Factory:Augusta, Georgia, USA

Full Specifications

KEY SPECS

Engine power (gross)
37.9 kW/51.5 hp/PS at 2600 rpm/SAE J1995 rated power
Power take-off (PTO) power
PRT - 30.5 kW/40.8 hp/eHST - 30.5 kW/Per SAE J1995
Steering hydraulics
23.5 L/min/6.2 gpm
Implement hydraulics
42.3 L/min/11.2 gpm
Hitch type
Category 1
Lift capacity, 24-in. behind link arms
1135 kg/2500 lb
Standard transmission; forward/reverse
eHydro Transmission (eHST)
Cruise control
Standard
Approximate shipping weight (open-station; cab)
Open operator station (OOS) - 1710 kg/3770 lb/Cab - 2120 kg/4675 lb
Wheelbase
185.5 cm/73 in.

ENGINE

Family
EYDXL2.09TDA/FYDXL2.09TDA/GYDXL2.09TDA
Manufacturer
Yanmar
Engine model
4TNV86CT-MJT
Engine power (gross)
37.9 kW/51.5 hp/PS at 2600 rpm/SAE J1995 rated power
Power take-off (PTO) power
PRT - 30.5 kW/40.8 hp/eHST - 30.5 kW/Per SAE J1995
Rated engine speed
2600 rpm
Type
Diesel
Injection pump type
High pressure common rail direct injection
Aspiration
Turbocharged
Emissions compliance
Final Tier 4
Cylinders/displacement
4 / 2.091 L/4 / 127.6 cu in.
Number of cylinders
Four
Cylinder liners
Cast-in-block
Bore and stroke
86 x 90 mm/3.4 x 3.54 in.
Compression ratio
19.1:1
Lubrication
Pressurized
Cooling system
Liquid
Air cleaner
Dual element with electronic restriction indicator
Engine torque at rated speed
139 Nm/102.5 lb-ft
Fuel tank capacity
Rollover protective structure (ROPS) - 56.9 L/15 U.S. gal./Cab - 52.2 L/13.8 U.S. gal.

ELECTRICAL

Battery size
770 CCA
Alternator (12-V)
75 amp
Starter size
2 kW/2.68 hp

FUEL SYSTEM

Type
High pressure common rail direct injection

TRANSMISSION

Standard transmission; forward/reverse
eHydro transmission (eHST)
Optional transmission; forward/reverse
12/12 PowrReverser transmission (PRT)
Left-hand reverser
PRT only
Transmission gear ranges
PRT - 12F/12R eHydro - Infinitely-variable 3 range
Final drive
Planetary
Brakes
Multi-plate wet disc
Steering
Hydrostatic power steering
Clutch, wet/dry
Wet
Clutch disk diameter wet clutch
129 mm/5.08 in.
Axle capacity
Front/1600 kg/3528 lb/Rear/2400 kg/5292 lb/
Creeper
SpeedMatch standard
Cruise control
Standard
Differential lock
Yes

HYDRAULICS

Type
Open center
Pump rated output
Steering/23.5 L/min/6.2 gpm/Implement/42.3 L/min/11.2/65.8 L/min/17.4 gpm
Pump type
Single gear
Draft control sensing
Position control
Remote control valves available
Up to six rear remotes

3-POINT HITCH

Type
Category 1
Lift capacity, 24-in. behind link arms
1135 kg/2500 lb

POWER TAKE-OFF (PTO)

Standard
Independent 540 rpm at 2600 rpm
Optional
540E rpm
Control
Independent
Clutch
Wet disc

FLUID CAPACITIES

Crankcase with filter
5.3 L/1.4 qt
Transmission and hydraulic system
47.3 L/12.5 gal.

FINAL DRIVE

Type
Planetary
Differential lock
Yes

OPERATOR STATION

Rollover protective structure
Type/Foldable/Yes
Platform - flat/straddle
Flat
Gear shift location - console/floor
PRT - Left-hand side

CAB

Compliance
OSHA, SAE, ASAE
Visibility
360 degree (angle)
Air conditioning, temperature differential
14.4 °C/58 °F
Doors
Two
Noise rating
78 dBA
Seat equipment
Air suspension with swivel

DIMENSIONS

Wheelbase
185.5 cm/73 in.
Front axle clearance
35.1 cm/13.8 in.
Turning radius with brakes
2.8 m/9.19 ft
Turning radius without brakes
3 m/9.84 ft
Approximate shipping weight (open-station; cab)
Open operator station (OOS) - 1710 kg/3770 lb/Cab - 2120 kg/4675 lb

TIRES

Front
Farm - 8-16/Turf - 27x10.5-15 or 27x12LL-15/Industrial - 10-16.5
Rear
Farm - 13.6-28/Turf - 44x18-20 or 22.5LL-16.1/Industrial - 16.9Lx24
Front tread range
148.1 cm/58.3 in.
Rear tread spacing
137.2 cm/54 in.

About John Deere Tractor

The 4052R model tractor belongs to the John Deere 4R Series. The 4052R is a Compact Utility Tractors type, that is used often in Agriculture Tractors. The 4052R tractor is operated by a 40.8 horsepower engine. This arrangement improves usability in the real world scenario.

Also See