John Deere 4310 Tractor (2004)
Manufacturer:John Deere
Price:N/A
Series:4000 Ten Compact Series
Model:4310
Equipment Type: Compact Utility Tractors
Factory:Augusta, Georgia, USA
Full Specifications
JOHN DEERE 4310 POWER
- Engine (gross)
- 31.2hp / 23.3kW
- PTO (claimed)
- 27hp / 20.1kW
ENGINE DETAIL
- Description
- Yanmar 3TNE84 diesel 3-cylinder liquid-cooled
- Displacement
- 92ci / 1.5L
- Power (gross)
- 31.2hp / 23.3kW
- Air cleaner
- dry
- Compression
- 18.5:1
- Rated RPM
- 2600
- Idle RPM
- 1000-2810
- Starter volts
- 12
- Starter power
- 1.9hp / 1.4kW
- Oil capacity
- 4.5qts / 4.3L
- Coolant capacity
- 6 qts /5.7 L
JOHN DEERE 4310 ENGINE
- Description
- Yanmar 1.5L 3-cyl diesel
TRANSMISSIONS OVERVIEW
- Description
- 9-speed partially synchronized hydrostatic 12-speed power shuttle
TRANSMISSION 1
- Transmission
- SyncShift
- Type
- partially synchronized
- Gears
- 9 forward and 3 reverse
- Oil capacity
- 25.2qts / 23.8L
- Description
- Three gears (1-3) plus reverse in three ranges (A-C). Gears can be shifted on the move using the clutch. Tractor must be stopped to shift ranges
SPEEDS 1
- Description
- With 11.2-24 rear tires
TRANSMISSION 2
- Transmission
- eHydro
- Type
- hydrostatic
- Gears
- infinite (3-range) forward and reverse
- Oil capacity
- 27.2qts / 25.7L
- Description
- Three-range hydrostatic transmission with foot pedals and cruise control. Tractor must be stopped to shift ranges. Automotive cruise control option allows set speed to be adjusted with rocker switch. SpeedMatch option allows a maximum speed to be set and full pedal travel used to achive that speed. LoadMatch option prevents the tractor from stalling during heavy loads. The MotionMatch option enables the acceleration rate to be set to fast or slow
SPEEDS 2
- Description
- With 11.2-24 rear tires
TRANSMISSION 3
- Transmission
- ePowrReverser
- Type
- power shuttle
- Gears
- 12 forward and reverse
- Oil capacity
- 25.2qts / 23.8L
- Description
- Four gears (1-4) in three ranges (A-C) with reverser lever. Gears are synchronized and may be shifted on the move using the clutch. Tractor must be stopped to shift ranges. Forward/reverse direction changes may be done on the move, without the clutch, by using the reverser lever
SPEEDS 3
- Description
- With 11.2-24 rear tires
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD
- Differential lock
- mechanical
- Steering
- power
- Brakes
- wet disc
- Cab
- Two-post ROPS. Foldable ROPS optional
- Transmissions
- 9-speed partially synchronized hydrostatic 12-speed power shuttle
CAPACITY
- Fuel
- 10gal / 37.9L
- Hydraulic system
- 6.3gal / 23.8L (gear) 6.8gal / 25.7L (hydro)
- Front axle
- 4.7qts / 4.4L
HYDRAULICS
- Type
- open center
- Capacity
- 6.3gal / 23.8L (gear) 6.8gal / 25.7L (hydro)
- Pressure
- 2500psi / 172.4bar
- Valves
- 5
- Pump flow
- 8.6gpm / 32.6lpm
- Total flow
- 13.9gpm / 52.6lpm
- Steering flow
- 5.3gpm / 20.1lpm
TRACTOR HITCH
- Rear Type
- I
- Rear lift (at 24
- 2,200lbs / 997kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540
- Mid PTO
- optional
- Mid RPM
- 2100
JOHN DEERE 4310 TIRES
- Ag front
- 5.00-15 (2WD) / 7.00-14 (4WD)
- Ag rear
- 11.2-24
DIMENSIONS
- Wheelbase
- 68inches / 172cm
- Length
- 117inches / 297cm
- Width
- 50inches / 127cm
- Ground clearance
- 13.4inches / 34cm
JOHN DEERE 4310 WEIGHT
- 2,600lbs / 1179kg (2WD) 2,900lbs / 1315kg (4WD)
- Max Drawbar
- 562lbs / 254kg
- Max front axle
- 1,588lbs / 720kg
- Max rear axle
- 4,410lbs / 2000kg
JOHN DEERE 4310 HEIGHT
- Hood
- 53.3inches / 135cm
- ROPS
- 82.4inches / 209cm (fixed) 90inches / 228cm (folding)
DIMENSIONS & TIRES
- Wheelbase
- 68inches / 172cm
- Weight
- 2600 to 2900 pounds
- Front tire
- 5.00-15
- Rear tire
- 11.2-24
ATTACHMENT OVERVIEW
- Description
- 60
60
- Type
- mid-mount John Deere 60 7-Iron
- Cutting width
- 60inches / 152cm
72
- Type
- mid-mount John Deere 3-blade
- Cutting width
- 72inches / 182cm
JOHN DEERE 420 LOADER
- Height (to pin)
- 87.6inches / 222cm
- Clearance, dumped bucket
- 66.1inches / 167cm
- Dump reach
- 30.3inches / 76cm
- Dump angle
- 43°
- Reach at ground
- 53.6inches / 136cm
- Rollback angle
- 23°
- Breakout force (at pin)
- 2693lbs / 1221kg
- Lift to full height (at pin)
- 1195lbs / 542kg
- Lift to full height (at 500mm)
- 895lbs / 405kg
- Raise time to height
- 2.9 s
- Bucket dump time
- 1.6 s
- Lowering time
- 2.4 s
- Rollback time
- 2.2 s
JOHN DEERE 430 LOADER
- Height (to pin)
- 101.4inches / 257cm
- Clearance, dumped bucket
- 78.3inches / 198cm
- Dump reach
- 26inches / 66cm
- Dump angle
- 45°
- Reach at ground
- 57.5inches / 146cm
- Rollback angle
- 30°
- Breakout force (at pin)
- 3299lbs / 1496kg
- Breakout force (at 500mm)
- 2417lbs / 1096kg
- Lift to full height (at pin)
- 1261lbs / 571kg
- Lift to full height (at 500mm)
- 1045lbs / 474kg
- Raise time to height
- 3.5 s
- Bucket dump time
- 1.8 s
- Lowering time
- 2.5 s
- Rollback time
- 2.3 s
JOHN DEERE 48 BACKHOE
- Backhoe type
- John Deere 48 Backhoe
- Weight
- 1517lbs / 688kg
- Transport height
- 81inches / 205cm
- 2-Foot flat digging depth
- 102inches / 259cm
- Reach from pivot
- 133inches / 337cm
- Loading height
- 82inches / 208cm
- Bucket Rotation
- 180
- Swing Arc
- 180
- Bucket force
- 3730lbs / 1691kg
- Dipperstick force
- 2435lbs / 1104kg
4310 SERIAL NUMBERS
- Location
- On right side of tractor frame above the front axle
- 2002
- 130001
- 2003
- 230001
- 2004
- 330001
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 40/55 (optional)
- Battery CCA
- 500
- Battery volts
- 12
About John Deere Tractor
The 4310 tractor is part of the John Deere's 4000 Ten Compact Series. The 4310 is a type of Compact Utility Tractors and that is primarily used for Agriculture Tractors applications. A engine powers the 4310 tractor. This arrangement is more practical in the actual world.
