Full Specifications
JOHN DEERE 4710 POWER
Engine (gross)
46.3hp / 34.5kW
Hydro PTO (claimed)
38.5hp / 28.7kW
Gear PTO (claimed)
40hp / 29.8kW
ENGINE DETAIL
Description
Yanmar 4TNE88 diesel 4-cylinder liquid-cooled
Displacement
133ci / 2.2L
Bore/Stroke
3.456x3.543inches / 88x 90mm
Power (gross)
46.3hp / 34.5kW
Air cleaner
dry with safety element
Compression
18:1
Rated RPM
2600
Torque
108lb-ft / 146.4Nm
Torque RPM
1700
Starter volts
12
Starter power
2.7hp / 2.0kW
Coolant capacity
6.8qts / 6.4L
ENGINE OIL
Oil capacity
5.1qts / 4.8L
JOHN DEERE 4710 ENGINE
Description
Yanmar 2.2L 4-cyl diesel
TRANSMISSIONS OVERVIEW
Description
12-speed power shuttle hydrostatic
TRANSMISSION 1
Transmission
PowrReverser
Type
power shuttle
Gears
12 forward and reverse
Oil capacity
38.8qts / 36.7L
Description
The Power Reverser is operated with a range shift lever, gear shift lever, and reverser lever. The tractor must be stopped, and clutch used, to change ranges. Gear shifts may be made while in motion using the clutch. A clutchless power shift can be made between forward and reverse using the reverser lever
SPEEDS 1
Description
With 13.6-28 rear tires
TRANSMISSION 2
Transmission
eHydro
Type
hydrostatic
Gears
infinite forward and reverse
Oil capacity
36.8qts / 34.8L
Description
The eHydro is operated via a three-position range shift lever plus forward and reverse pedals. The tractor must be stopped to change range
SPEEDS 2
Description
With 13.6-28 rear tires
MECHANICAL
Chassis
4x4 MFWD 4WD
Steering
power
Brakes
wet disc
Cab
Platform with ROPS
Transmissions
12-speed power shuttle hydrostatic
CAPACITY
Fuel
12.5gal / 47.3L
Hydraulic system
9.7gal / 36.7L 9.2gal / 34.8L (hydrostatic)
Front axle
5.2qts / 4.9L
HYDRAULICS
Type
open center
Capacity
9.7gal / 36.7L 9.2gal / 34.8L (hydrostatic)
Pressure
2500psi / 172.4bar
Pump flow
10.6gpm / 40.1lpm
Total flow
15.9gpm / 60.2lpm
Steering flow
5.3gpm / 20.1lpm
TRACTOR HITCH
Rear Type
I
Rear lift
2,500lbs / 1134kg
POWER TAKE-OFF (PTO)
Rear PTO
independent
Mid PTO
optional
Mid RPM
2100
JOHN DEERE 4710 TIRES
Ag front
6.00-16 (2WD) / 6.50-16 (2WD) / 7.00-16 (4WD) / 8.00-16 (4WD)
Ag rear
13.6-24 / 13.6-28 / 16.9-24
Lawn/turf front
27x10.5-15/27x12LL-15 (4WD)
Lawn/turf rear
44x18.00-20/22.5LL-16.1
Industrial front
10.00-16.5 (4WD)
Industrial rear
17.5L-24
DIMENSIONS
Wheelbase
71.5inches / 181cm
Length
135inches / 342cm
Width
62inches / 157cm *Minimum width
Shipping weight
3,450lbs / 1564kg
JOHN DEERE 4710 HEIGHT
Hood
51inches / 129cm
ROPS
91.6inches / 232cm 97.6inches / 247cm (folding)
DIMENSIONS & TIRES
Wheelbase
71.5inches / 181cm
Weight
3,450lbs / 1564kg
Front tire
6.00-16
Rear tire
13.6-24
ATTACHMENT OVERVIEW
Description
72
72
Type
mid-mount John Deere 3-blade
Cutting width
72inches / 182cm
JOHN DEERE 460 LOADER
Height (to pin)
112inches / 284cm
Clearance, dumped bucket
89inches / 226cm
Dump reach
27inches / 68cm
Dump angle
45°
Reach at ground
62inches / 157cm
Rollback angle
30°
Breakout force (at pin)
3863lbs / 1752kg
Breakout force (at 500mm)
2929lbs / 1328kg
Lift to full height (at pin)
2330lbs / 1056kg
Lift to full height (at 500mm)
1705lbs / 773kg
Raise time to height
4.8 s
Bucket dump time
2.2 s
Lowering time
3.3 s
Rollback time
2.5 s
4710 SERIAL NUMBERS
Location
Serial number plate on the right side of the tractor frame, above the front axle
2003
270000
2004
370000
ELECTRICAL
Ground
negative
Charging system
alternator
Charging amps
40
Battery CCA
690
Battery volts
12
The 4710 model tractor is member of John Deere's 9R line of tractors. The 4710 is a Compact Utility Tractors type, which is used most often in Agriculture Tractors. The 4710 tractor features a engine. This arrangement is more practical in the actual world.