Full Specifications
KEY SPECS
Engine description
John Deere PowerTech 3029
Engine displacement
3 cylinders: 2.9 L/179 cu in.
Rated engine power
At 2100 rpm: 37.4 kW/50 hp
Rated PTO power (hp SAE)
At 2100 rpm: 27.6 kW (37 PTO)
Maximum PTO power
@ 1800 RPM/Open Station: 28.5kw (38hp)
Transmission type
Standard: 9F/3R SyncShuttle
Hydraulic pump rated output
Standard: 66.1 L/min/17.5 gpm
Rear hitch category (SAE designation)
Category 2; convertible to 1
ENGINE SPECIFICATIONS
Description
John Deere PowerTech 3029
Aspiration
Turbocharged
Cylinders liners
Wet sleeved
Displacement
3 cylinders: 2.9 L/179 cu in.
ENGINE PERFORMANCE
Rated power
At 2100 rpm: 37.4 kW/50 hp
Rated PTO power (hp SAE)
At 2100 rpm: 27.6 kW (37 PTO)
Maximum PTO power
@ 1800 RPM:/Open Station - 28.5kw (38hp)
TRANSMISSION
Type
Standard: 9F/3R SyncShuttle
Reverser
No
Clutch; wet/dry
Dry
HYDRAULIC SYSTEM
Type
Open Center
Pump rated output
Standard: 66.1 L/min/17.5 gpm
Available flow at a single rear SCV
43.4L/min / 11.5gpm
Number of rear selective control valves (SCVs)
standard: 1/Optional: 2
Number of mid selective control valves (SCVs)
Standard: 0/Optional: 2
Joystick SCV control
2WD: FIK/MFWD: Standard
REAR HITCH
Hitch draft control load sense type
Mechanical
Remote control valves available
Standard: 1/Optional: 2
Hitch category (SAE designation)
Category 2; convertible to 1
Maximum lift capacity behind lift points
OECD hitch lift cap at 24 behind: 3192 lb/1448 kg
Sensing type
Top link
REAR POWER TAKE-OFF (PTO)
Type
Standard: Independent 540
Engine rpm (at rated PTO speeds)
540 at 2100rpm
PTO actuation
Mechanical (lever)
REAR AXLE
Final drive type
Planetary
Differential controls
Mechanical (pedal)
Axle type
Flanged
Brakes, type and control
Hydraulic wet disc
TIRES
Front
2WD: 7.5-16 R1/MFWD: 9.5-24 R1
Rear
2WD: 13.6-28 R1/MFWD: 13.6-28 R1
Turning radius with brakes
2WD: 3.1 m/10.2 ft/MFWD: 3.94 m/12.9 ft
Turning radius without brakes
2WD: 3.5 m/11.5 ft/MFWD: 4.65 m/15.3 ft
OPERATOR STATION
Rollover protective structure, OOS
Rigid - foldable - telescopic/Foldable, 2-post/Platform - flat/straddle/Straddle/Gearshift location - console/floor/Floor, on the side/
Seat
Mechanical
DIMENSIONS
Wheelbase
2WD and MFWD: 2050 mm/80.7 in.
Overall length
3639mm / 143.3in.
Approximate shipping weight, Open;Cab
MFWD: 2525kg / 5566lb
CAPACITIES
Fuel tank
Standard: 72.5L / 19 U.S.gal.
MISCELLANEOUS
Country of manufacture
Sub assembly in Pune, India, Final assembly in Augusta, GA
The 5045E UTILITY TRACTOR model tractor belongs to the John Deere 5E Series. The 5045E UTILITY TRACTOR is a Utility Tractors type, that is used often in Agriculture Tractors. The 50 horsepower engine of the 5045E UTILITY TRACTOR tractors is impressive. This setting improves usability in the real world setting.