John Deere 5050E Tractor (2023)

Manufacturer:John Deere

Price:28,714(USD)

Series:5E Series

Model:5050E

Equipment Type: Utility Tractors

Factory:Pune, Maharashtra

Full Specifications

KEY SPECS

Engine description: John Deere Power Tech 3029 EWR
Engine displacement: 3 cylinders: 2.9L / 179cu in
Rated engine power: At 2100 rpm: 37.4kW / 50hp
Maximum engine power: 37.4kW / 50hp
Rated PTO power (hp SAE): At 2100 rpm: 27.6kW / 37hp
Transmission type: Sync Shuttle 9F/3R
Hydraulic pump rated output: 68.8L/min / 18.2gpm
Rear hitch category (SAE designation): Category 2; convertible to 1

ENGINE SPECIFICATIONS

Description: John Deere Power Tech 3029 EWR
Engine type: 3029HPY110
Engine family: NJDXL02.9339
Rated speed: 2100 rpm
Aspiration: Turbocharged
Cylinders liners: Wet sleeved
Emission level: Final Tier 4
After treatment type: DOC/EGR
Displacement: 3 cylinders: 2.9L / 179cu in

ENGINE PERFORMANCE

Rated power: At 2100 rpm: 37.4kW / 50hp
Rated PTO power (hp SAE): At 2100 rpm: 27.6kW / 37hp
Power boost: 0 percent
Maximum engine power: 37.4kW / 50hp
Engine peak torque: At 1500 rpm: 209Nm / 154lb-ft
PTO torque rise: 22 percent

TRANSMISSION

Type: Sync Shuttle 9F/3R
Reverser: No
Clutch; wet/dry: Dry
Creeper: Kit available for OOS Sync Shuttle 9F/3R transmission

HYDRAULIC SYSTEM

Type: Open center
Pump rated output: 68.8L/min / 18.2gpm
Available flow at a single rear SCV: 43.1L/min / 11.4gpm
Number of rear selective control valves (SCVs): Standard: One / Optional: Two
Number of mid selective control valves (SCVs): Standard: Zero / Optional: Up to Three
Joystick SCV control: Mechanical

REAR HITCH

Hitch draft control load sense type: Mechanical
Remote control valves available: Standard: One / Optional: Two
Hitch category (SAE designation): Category 2; convertible to 1
Maximum lift capacity behind lift points: 1448kg / 3192lb
Sensing type: Top link

DRAWBAR

Maximum vertical load: field use (short position): 1120kg / 2470lb Field use (fully extended): 760kg / 1675lb

REAR POWER TAKE-OFF (PTO)

Type: Independent 540
Engine rpm (at rated PTO speeds): 540 at 2100 rpm
PTO actuation: Mechanical (lever)

REAR AXLE

Type: Flange
Final drive type: Planetary
Differential controls: Mechanical (pedal)
Brakes, type and control: Hydraulic wet disc

FRONT AXLE

Type: Standard: Two-Wheel Drive (2WD) / Optional: Mechanical Front Wheel Drive (MFWD)

TIRES

Rear: 2WD: 14.9-28 R1 Bias MFWD: 14.9-28 R1 Bias
Turning radius with brakes: 2WD: 3.1m / 10.2ft MFWD: 3.94m / 12.9ft
Turning radius without brakes: 2WD: 3.5m / 11.5ft MFWD: 4.65m / 15.3ft

ELECTRICAL SYSTEM

Alternator size: 70 amp
Battery options: 12 V
Working lights: Halogen
Type of bulb in headlight (Halogen, Zenon, LED): Halogen
Type of bulb in beacon (Halogen, Zenon, LED): Kit: Halogen

OPERATOR STATION

Rollover protective structure, OOS: Rigid - foldable - telescopic Foldable, 2-post Platform - flat/straddle Straddle Gearshift location - console/floor Floor, on the side
Seat: Mechanical
Instructional seat: Not Available
Display: Simple automotive-style instrument cluster

DIMENSIONS

Wheelbase: 2WD and MFWD: 2050mm / 80.7in
Overall length: 3639mm / 143.3in
Approximate shipping weight, Open;Cab: 2WD OOS: 2420kg / 5335lb MFWD OOS: 2634kg / 5809lb

CAPACITIES

Fuel tank: 72.5L / 19gal U.S
Diesel exhaust fluid (DEF) tank: Not Applicable

MISCELLANEOUS

AutoTrac ready: No
ISOBUS ready: No
Country of manufacture: Sub assembly in Pune, India, Final assembly in Augusta, GA

ADDITIONAL INFORMATION

Date collected: 6-Jan-2023

About John Deere Tractor

The 5050E model tractor belongs to the 5E Series of tractors from John Deere. The 5050E is a Utility Tractors type, which is used most often in Agriculture Tractors. A 50 engine powers the 5050E tractor. This arrangement is more practical in the real world.