John Deere 5100GN Tractor (2020)
Manufacturer:John Deere
Price:60,190(USD)
Series:Narrow Series Tractors
Model:5100GN
Equipment Type: Specialty Tractors
Factory:Augusta, GA
Full Specifications
KEY SPECS
- Engine description
- 3.4L Fiat® Powertrain Technologies
- Engine displacement
- 4 cylinder: 3.4 L207 cu in.
- Rated engine power
- 74.6 kW100 hp
- Rated PTO power (hp SAE)
- 64.9 kW87 hp
- Transmission type
- 24F/12R PowrReverser, EH Hi-Lo"
- Hydraulic pump rated output
- Standard: 96.5 L/min25.5 gpmOptional: 126.4 L/min33.4 gpm
- Rear hitch category (SAE designation)
- Category 1/Category 2
- Base machine weight
- OOS: 2660 kg5864 lbCab: 2975 kg6558 lb
ENGINE SPECIFICATIONS
- Description
- 3.4L Fiat® Powertrain Technologies
- Engine family
- FPTF34
- Rated speed
- 2300 rpm
- Aspiration
- Turbocharged
- Cylinders liners
- Wet sleeved
- Emission level
- Final Tier 4
- After treatment type
- Diesel Oxidation Catalyst (DOC) and Selective Catalyst Reduction (SCR)
- Displacement
- 4 cylinder: 3.4 L207 cu in.
ENGINE PERFORMANCE
- Rated power
- 74.6 kW100 hp
- Rated PTO power (hp SAE)
- 64.9 kW87 hp
TRANSMISSION
- Type
- 24F/12R PowrReverser, EH Hi-Lo"
- Reverser
- Yes
- Clutch; wet/dry
- Wet
- Creeper
- Yes
HYDRAULIC SYSTEM
- Type
- Open Center
- Pump rated output
- Standard: 96.5 L/min25.5 gpmOptional: 126.433.4 gpm
- Available flow at a single rear SCV
- 41.6 L/min11 gpm
- Number of rear selective control valves (SCVs)
- Standard: 2Optional: 4
- SCV control
- Mechanical
REAR HITCH
- Hitch draft control load sense type
- Mechanical
- Hitch category (SAE designation)
- Category 1/Category 2
- Maximum lift capacity behind lift points
- 2549 kg5620 lb
- Sensing type
- Top Link Draft Sensing
DRAWBAR
- Drawbar category
- Extendable
REAR POWER TAKE-OFF (PTO)
- Type
- Standard: 540/540E
- Engine rpm (at rated PTO speeds)
- 540 at 1938 rpm540E at 1648 rpm
- PTO actuation
- Electrohydraulic
REAR AXLE
- Type
- Carraro Drivetech
- Final drive type
- Three point inboard planetary drives
- Differential controls
- Multi disk oil cooled design
- Axle type
- Flanged
- Brakes, type and control
- Multi-disc rear braking
- Rear differential lock
- Electrohydraulic
FRONT AXLE
- Type
- Carraro Drivetech
- Front axle differential lock
- Self Locking Differential
TIRES
- Front
- 7.50R16
- Rear
- 280/70 R18
- Turning radius without brakes
- 3627 mm11.9 ft
STEERING
- Type
- Dynamic Load Sensing, Hydrostatic, Flow Metering"
ELECTRICAL SYSTEM
- Alternator size
- 120 amp
OPERATOR STATION
- Rollover protective structure, OOS
- Rigid - foldable - telescopicRigid, front foldingPlatform - flat/straddleStraddleGearshift location - console/floorFloorYes"
- Seat
- OOS: standard: COBO MT SC74 M200Optional: COBO MT SC74 M97Cab: standard: COBO MT SC74 M200Optional: GRAMMER MSG93/511
- dB(A) rating
- 82
DIMENSIONS
- Wheelbase
- 2098 mm82.5 in.
- Overall length
- 4319 mm170 in.
- Drawbar clearance
- Min. 254 mm10 in.Max. 289 mm11.3 in.
- Front axle center
- Min. 254 mm10 in.Max. 289 mm11.3 in.
WEIGHT
- Base machine weight
- OOS: 2660 kg5864 lbCab: 2975 kg6558 lb
- Maximum permissible weight
- 4200 kg9259.41 lb
- Fuel tank
- Standard: 73.1 L19.3 U.S. gal.Optional: 101.4 L26.8 U.S. gal.
SERVICEABILITY
- Interval for engine oil change
- 500
- Interval for hydraulic/transmission oil change
- 750
About John Deere Tractor
The 5100GN model tractor is one of John Deere's 9R line of tractors. The 5100GN is a Specialty Tractors type, which is used mainly in Agriculture Tractors. A 87 horsepower engine powers the 5100GN tractor. This setting more usefulness in the actual world.
