Full Specifications
KEY SPECS
Engine description
John Deere PowerTech PWL (B20 Diesel Compatible)
Engine displacement
4.5 L/275 cu in.
Rated engine power
97/68EC: 77 kW/105 engine hp
Rated PTO power (hp SAE)
66 kW/89 PTO hp
Transmission type
Standard: John Deere 12F/12R PowrReverser Transmission: 30 km/h/19 mph/Optional: John Deere 24F/12R PowrReverser Transmission: 40 km/h/25 mph
Hydraulic pump rated output
36.5 cc pump: 75.7 L/min/20 gpm
Rear hitch category (SAE designation)
Category 2: 2500 kg (5500 lb) standard lift at 610 mm behind hitchpoint/Optional: Category 2: 3318 kg (7300 lb) heavy duty lift at 610 mm behind hitchpoint
ENGINE SPECIFICATIONS
Description
John Deere PowerTech PWL (B20 Diesel Compatible)
Engine type
Diesel, in-line, 4-cylinders, wet-sleever cylinder lingers with 4 valves-in-head
Engine family
HJDXL04.5315
Rated speed
2200 rpm
Aspiration
Turbocharged, wastegate turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
Emission level
Final Tier 4
After treatment type
DOC/DPF/SCR
Displacement
4.5 L/275 cu in.
ENGINE PERFORMANCE
Rated power
97/68EC: 77 kW/105 engine hp
Rated PTO power (hp SAE)
66 kW/89 PTO hp
Engine peak torque
At 1,600 rpm: 432 Nm/318 lb-ft
PTO torque rise
30 percent
TRANSMISSION
Type
Standard: John Deere 12F/12R PowrReverser Transmission: 30 km/h/19 mph/Optional: John Deere 24F/12R PowrReverser Transmission: 40 km/h/25 mph
HYDRAULIC SYSTEM
Type
Open-center/Gear driven
Pump rated output
36.5 cc pump: 75.7 L/min/20 gpm
Available flow at a single rear SCV
75.7 L/min/20 gpm
Number of rear selective control valves (SCVs)
Standard: ISO Couplers: 2/Optional: ISO Couplers 3
SCV control
Mechanical
REAR HITCH
Hitch category (SAE designation)
Category 2: 2500 kg (5500 lb) standard lift at 610 mm behind hitchpoint/Optional: Category 2: 3318 kg (7300 lb) heavy duty lift at 610 mm behind hitchpoint
Maximum lift capacity behind lift points
Standard: Category 2 with heavy duty lift: 3318 kg/7300 lb
Sensing type
Optional
DRAWBAR
Drawbar category
Standard: Category 2/Optional: Category 2 heavy duty
Maximum vertical load
Standard: Category 2 1000-1250 kg/2205-2756 lb/Optional: Category 2 heavy duty: 1200-1900 kg/2645-4189 lb/Maximum vertical load dependent on drawbar position
REAR POWER TAKE-OFF (PTO)
Type
Independent/Standard: 35 mm (1.375 in.) 540 rpm/1000 rpm reversible shaft
Engine rpm (at rated PTO speeds)
2085 engine rpm at 540 rpm PTO/2067 engine rpm at 1000 rpm PTO
REAR AXLE
Type
Flange
Final drive type
Inboard Planetary
Rear differential lock
Full-locking mechanical
FRONT AXLE
Type
Standard: MFWD/Optional: 2WD
Front axle differential lock
2WD: None/MFWD: limited slip
TIRES
Wheel tread range
2WD: 1533-2043 mm/60.4-80.4 in./MFWD: 1516-2016 mm/59.7-79.4 in.
STEERING
Type
Standard: Hydrostatic power
ELECTRICAL SYSTEM
Alternator size
90 amp
Battery options
12 V
Total cold cranking amps
925 CCA
OPERATOR STATION
Seat
Standard: Mechanical suspension cloth seat/Optional: Air suspension
Instructional seat
Optional
Display
LCD instrument cluster
DIMENSIONS
Wheelbase
2WD: 2456 mm/96.7 in./MFWD: 2450 mm/96.5 in.
Approximate shipping weight, Open;Cab
2WD: Open: 4064 kg/8960 lb/MFWD: Open: 4268 kg/9410 lb/Cab: 4645 kg/10,240 lb
WEIGHT
Maximum ballast level
6464 kg/14250 lb
CAPACITIES
Crankcase oil volume
15 L/4 U.S. gal.
Fuel tank
168 L/44.4 U.S. gal.
Cooling system
Open station: 18.6 L/4.7 U.S. gal./Cab: 19.1 L/5 U.S. gal.
Transmission-hydraulic system
58 L/15.3 U.S. gal.
SERVICEABILITY
Interval for engine oil change
500 hours
Interval for hydraulic/transmission oil change
1,000 hours
Interval for engine coolant change
5,000 hours
MISCELLANEOUS
Country of manufacture
Mexico
ADDITIONAL INFORMATION
Date collected
9-Feb-17
The John Deere 6105E tractor is part of the company's 6E Series. The 6105E is a Utility Tractors and that is mostly used for Agriculture Tractors purposes. The 6105E tractor has a 89 PTO horsepower engine. This setting improves usability in the real world.