John Deere 6125M Tractor (2015)

Manufacturer:John Deere

Price:101,397(USD)

Series:6M Series

Model:6125M

Equipment Type: Utility Tractors

Factory:Mannheim, Baden-Württemberg, Germany

Full Specifications

ENGINE DETAIL

Description: John Deere PowerTech PVX variable geometry turbocharger with intercooler diesel 4-cylinder liquid-cooled
Displacement: 276ci / 4.5L
Bore/Stroke: 4.19x5.00inches / 106x 127mm
Emission: Interim Tier IV
Emission control: cooled exhaust gas recirculation
Rated Power (EC 97/98): 125hp / 93.2kW
Maximum Power (EC 97/68): 130hp / 96.9kW
Fuel system: high pressure common rail
Compression: 16.1:1
Rated RPM: 2100
Torque: 415lb-ft / 562.7Nm
Torque RPM: 1600
Starter: electric
Starter volts: 12
Oil capacity: 16.9qts / 16.0L
Coolant capacity: 23.3qts / 22.1L

JOHN DEERE 6125M ENGINE

Description: John Deere 4.5L 4-cyl diesel

TRANSMISSIONS OVERVIEW

Description: 12-speed fully synchronized 16-speed partial power shift 24-speed partial power shift

TRANSMISSION 1

Transmission: SyncroPlus
Type: fully synchronized
Gears: 12 forward and 4 reverse
Clutch: wet disc

TRANSMISSION 2

Transmission: Power Quad
Type: partial power shift
Gears: 16 forward and reverse
Clutch: wet disc
Oil capacity: 55qts / 52.1L

TRANSMISSION 3

Transmission: Power Quad Plus
Type: partial power shift
Gears: 24 forward and reverse
Clutch: wet disc
Oil capacity: 55qts / 52.1L

TRANSMISSION 4

Transmission: AutoQuad Plus
Type: partial power shift
Gears: 24 forward and reverse
Clutch: wet disc
Oil capacity: 55qts / 52.1L

JOHN DEERE 6125M TRANSMISSIONS

Description: 12-speed fully synchronized 16-speed partial power shift 24-speed partial power shift

MECHANICAL

Description: Two- or four-wheel drive Hydraulic wet disc brakes Two-post foldable ROPS. Cab optional with air-conditioning. Green Star (optional); AutoTrac (optional)
Differential lock: Electro-hydraulic rear limit-slip front (4WD)
Steering: hydrostatic power

CAPACITY

Fuel: 58gal / 219.5L
Hydraulic system: 13.7gal / 51.9L

HYDRAULICS

Type: open center pressure compensated/closed center load sensing pressure and flow compensated (optional)
Capacity: 13.7gal / 51.9L
Pressure: 2900psi / 200.0bar
Rear valves: 1 to 3
Mid valves: 2 or 3 (optional)
Pump flow: 21.1gpm / 79.9lpm 30gpm (optional) / 113.6lpm
SCV flow: 21.1gpm / 79.9lpm

TRACTOR HITCH

Rear Type: II/IIIN
Control: electrohydraulic load sensing
Rear lift (at 24): 5154lbs / 2337kg 6247lbs (optional) / 2833kg
Drawbar: Cat. II

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 540/1000 (1.375)
Engine RPM: 540@1932 / 1000@1932

JOHN DEERE 6125M TIRES

Standard tires (ag): Front: 10.00-16. Rear: 460/85R34 (2WD) Front: 380/85R24. Rear: 460/85R34 (4WD)

DIMENSIONS & TIRES

Wheelbase: 101.6inches / 258cm
Weight: 11519lbs / 5225kg
Front tire: 10.00-16
Rear tire: 460/85R34 (2WD)

6125M SERIAL LOCATION

Description: Serial number plate on the right side of the tractor frame, above the front axle

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 90/150 (optional)
Charging volts: 14
Battery volts: 12

About John Deere Tractor

The 6125M model tractor belongs to the 6M Series of tractors from John Deere. The 6125M is classified as a Utility Tractors and which is mostly used for Agriculture Tractors operations. A engine runs the 6125M tractor. This setting is more practical in the real world.