John Deere 8R 230 Tractor
Manufacturer:John Deere
Price:283,001(USD)
Series:8R Series
Model:8R 230
Equipment Type: Row-Crop Tractors
Factory:Waterloo, Iowa, USA
Full Specifications
KEY SPECS
- Engine description
- John Deere PowerTech PVS 9.0 L (B20 diesel compatible)
- Engine displacement
- 9 L/549 cu in.
- Rated engine power
- ECE-R120: 169 kW/230 hp
- Maximum engine power
- ECE-R120: 186 kW/253 hp
- Rated PTO power (hp SAE)
- 135 kW/182 hp
- Transmission type
- Standard: e23 PowerShift with Efficiency Manager 40K, 40 km/h (24.9 mph)/Optional: 16-speed PowerShift 40 km/h (24.9 mph)/e23 PowerShift with Efficiency Manager 50K, 50 km/h (31 mph)/John Deere AutoPowr IVT 40K, 0.05-42 km/h (0.03-26 mph)/John Deere AutoPowr IVT 50K, 0.05-50 km/h (0.03-31 mph)
- Hydraulic pump rated output
- Standard: 85-cc pump: 227.1 L/min/60 gpm/Optional: 85-cc plus 35-cc dual pump: 318 L/min/84 gpm
- Rear hitch category (SAE designation)
- Standard: Category 3/3N standard lift at 610 mm (24 in.) behind hitchpoint: 6350/14,000 lb/Optional: Category 3/3N at 610 mm (24 in.) behind hitchpoint: 8391 kg/18,500 lb/Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 9072 kg/20,000 lb
- Base machine weight
- MFWD/PowerShift: 11,700 kg/25,800 lb/ILS/e23: 12,700 kg/28,000 lb
ENGINE SPECIFICATIONS
- Description
- John Deere PowerTech PVS 9.0 L (B20 diesel compatible)
- Engine type
- Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head
- Engine family
- MJDXL09.0333
- Rated speed
- 2100 rpm
- Aspiration
- Single, variable geometry turbo; air-to-air aftercooling and cooled exhaust gas recirculation
- Cylinders liners
- Wet-sleeve
- Emission level
- Final Tier 4
- After treatment type
- Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
- Displacement
- 9 L/549 cu in.
ENGINE PERFORMANCE
- Rated power
- ECE-R120: 169 kW/230 hp
- Rated PTO power (hp SAE)
- 135 kW/182 hp
- Power boost
- 10 percent
- Maximum engine power
- ECE-R120: 186 kW/253 hp
- Engine peak torque
- At 1600 rpm: 1077 Nm/794 lb-ft
- PTO torque rise
- 40 percent
TRANSMISSION
- Type
- Standard: e23 PowerShift with Efficiency Manager 40K, 40 km/h/24.9 mph/Optional: 16-speed PowerShift 40 km/h/e23 PowerShift with Efficiency Manager 50K, 50 km/h/31 mph/John Deere AutoPowr IVT 40K, 0.05-42 km/h (0.03-26 mph)/John Deere AutoPowr IVT 50K, 0.05-50 km/h (0.03-31 mph)
HYDRAULIC SYSTEM
- Type
- Closed-center, pressure/flow compensated system with load sensing
- Pump rated output
- Standard: 85-cc pump: 227.1 L/min/60 gpm/Optional: 85-cc plus 35-cc dual pump: 318 L/min/84 gpm
- Available flow at a single rear SCV
- 1.3-cm (1/2-in.) couplers: 132 L/min/35 gpm/1.9-cm (3/4-in.) coupler: 159 L/min/42 gpm
- Available flow at front SCVs
- 96 L/min/25 gpm
- Number of rear selective control valves (SCVs)
- Standard: 1.3-cm (1/2-in.) ISO couplers: 4/Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available/1.9-cm (3/4-in.) ISO coupler: 1
- SCV control
- Electronic
REAR HITCH
- Hitch category (SAE designation)
- Standard: Category 3/3N standard lift at 610 mm (24 in.) behind hitchpoint: 6350 kg/14,000 lb/Optional: Category 3/3N at 610 mm (24 in.) behind hitchpoint: 8391 kg/18,500 lb/Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 9072 kg/20,000 lb
- Maximum lift capacity behind lift points
- Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg/26,729 lb
- Sensing type
- Electrohydraulic
- Rear axle differential lock
- Electrohydraulic
DRAWBAR
- Drawbar category
- Standard: Category 3/Optional: Category 4/Category 4 with heavy-duty support
- Maximum vertical load
- Dependent on drawbar position: 1837 to 2700 kg/4050 to 6000 lb/Optional: 2,245 kg/4,950 lb/4,990 kg/11,000 lb
REAR POWER TAKE-OFF (PTO)
- Type
- Independent/Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm/Optional: 44 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm/44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm
- Engine rpm (at rated PTO speeds)
- 16-speed PowerShift: 1,000 PTO rpm at 2,003 engine rpm, 1,000 ECO PTO rpm at 1,596 engine rpm, 540 PTO rpm at 1,817 engine rpm/IVT: 1,000 PTO rpm at 2,000 engine rpm, 1,000 ECO PTO at 1594 engine rpm, 540 PTO rpm at 1,814 engine rpm/e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm
- Multispeed PTO option availability
- Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable
- PTO actuation
- Electrohydraulic with adjustable modulation
FRONT HITCH
- Category
- Category 3N
- Standard lift capacity
- Category 3N ground-engaging front hitch: 5200 kg/11,464 lb
- Front power take-off (PTO)
- 44 mm (1.75 in.) 20 spline, 1000 rpm/35 mm (1.375 in.) 21 spline, 1000 rpm/35 mm (1.375 in.) 6 spline, 1000 rpm (available dependent on location)
- PTO speed
- 1,000 PTO rpm at 2000 engine rpm
REAR AXLE
- Type
- Standard: Rack-and-pinion, double flat, or flange axles/Optional: Long, single taper hub: Diameter: 110 x 3010 mm/4.33 x 118.5 in./Long, dual taper hub: Diameter: 110 x 3010 mm/Long, dual taper hub: Diameter: 120 x 3010 mm/4.72 x 118.5 in./Short, double flat axle with single taper hub: Diameter: 120 x 2550 mm/4.72 x 100.4 in.
- Final drive type
- Inboard planetary three pinion
- Rear differential lock
- Full-locking electrohydraulic
FRONT AXLE
- Type
- Standard: 1300 Series MFWD/Optional: 1500 Series MFWD/ILS
- Front axle differential lock
- 1300 Series MFWD: Limited Slip/1500 Series MFWD: Full-locking electrohydraulic/ILS: Full-locking electrohydraulic
TIRES
- Wheel tread range
- 1300 Series MFWD: 1524-2235 mm/60-88 in./1500 Series MFWD: 1524-3657 mm/60-144 in./ILS: 1524-3657 mm
- Turning radius without brakes
- 1300 Series with 380/85R34 group 42 tires at 152.4-cm (60-in.) spacing, 5.4 m/17.7 ft/ILS with 380/85R34 group 42 tires at 152.4-cm (60-in.) spacing, 5.42 m/17.8 ft
- Central Tire Inflation System (CTIS)
- Optional
STEERING
- Type
- Standard: Hydraulic power-steering with electric pump back-up/Optional: ActiveCommand Steering 2 (ACS 2) with electronic backup pump
ELECTRICAL SYSTEM
- Alternator size
- Standard: 200 amp/Optional: 330 amp
- Battery options
- 12 V
- Working lights
- Standard: 18 halogen/Available: 18 LED/22 LED
- Type of bulb in headlight (Halogen, Zenon, LED)
- Standard: halogen, 65 W/Available: LED
- Total cold cranking amps
- 1,850 CCA
OPERATOR STATION
- Seat
- Degree of seat swivel, left hand/25 degree (angle)/Degree of seat swivel, right hand/40 degree (angle)/Standard: air suspension/Optional: ActiveSeat II
- Cab suspension
- Optional
- Instructional seat
- Standard
- Display
- Standard: 4600 Generation 4 CommandCenter: 25.4 cm/10 in.
- Radio
- Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
- Inner cab volume
- 3.24 m3/114 cu ft
- Cab glass area
- 6.56 m2/70.61 sq ft
DIMENSIONS
- Wheelbase
- MFWD: 3,080 mm/121.3 in./ILS: 3,050 mm/120.1 in.
- Overall length
- 6,636 mm/261.3 in.
- Drawbar clearance
- 376 mm/14.8 in.
- Front axle center
- MFWD: 686 mm/27 in./ILS: 590 mm/23.2 in.
WEIGHT
- Base machine weight
- MFWD/PowerShift: 11,700 kg/25,800 lb/ILS/e23: 12,700 kg/28,000 lb
- Maximum ballast level
- 20,000 kg/44,100 lb
- Maximum permissible weight
- 20,000 kg/44,100 lb
CAPACITIES
- Crankcase oil volume
- 1300 MFWD: 25.7 L/6.8 U.S. gal./1500 MFWD: 27.6 L/7.3 U.S. gal./ILS: 25.8 L
- Fuel tank
- 727 L/192 U.S. gal./CTIS: 651 L/172 U.S. gal.
- Diesel exhaust fluid (DEF) tank
- 37.2 L/9.8 U.S. gal.
- Cooling system
- 42.3 L/11.2 U.S. gal.
- Transmission-hydraulic system
- 1300 MFWD: 180.7 L/47.7 U.S. gal./1500 MFWD: 184.6 L/48.8 U.S. gal./ILS: 207.2 L/54.7 U.S. gal.
SERVICEABILITY
- Interval for engine oil change
- 500 hours
- Interval for hydraulic/transmission oil change
- 1,500 hours
- Interval for engine coolant change
- 6,000 hours
LOADERS
- Loader
- H480
- Lift capacity at full height
- 2,486 kg/5469 lb/measured at 800 mm (31.5 in.) ahead of pivot
- Maximum lift height
- 4735 mm/186 in.
PRECISION AG
- Guidance
- Integrated AutoTrac
- Telematic
- JDLink hardware standard, activations, and Ethernet harnesses (availability dependent upon destination)
- Remote diagnostics
- JDLink hardware standard
MISCELLANEOUS
- Country of manufacture
- USA
ADDITIONAL INFORMATION
- Date collected
- 22-Jan-2021
About John Deere Tractor
The 8R 230 model tractor belongs to the John Deere 8R Series. The 8R 230 is a kind of Row-Crop Tractors and that is often used for Agriculture Tractors activities. The 8R 230 tractor is powered by a 182 horsepower engine. This setup more usability in the real world.
