John Deere D Tractor (1953)

Manufacturer:John Deere

Price:1,000(USD)

Series:Two-Cylinder Letter Series

Model:D

Equipment Type: Standard-Tread Tractors

Factory:Waterloo, Iowa, USA

Full Specifications

ENGINES OVERVIEW

Description: John Deere 7.6L 2-cyl all fuel John Deere 8.2L 2-cyl all fuel

ENGINE DETAIL 1

Description: John Deere all fuel 2-cylinder liquid-cooled/Used from beginning until 1927, S/N 53388
Displacement: 465ci / 7.6L
Bore/Stroke: 6.50x7.00inches / 165x 178mm
Compression: 3.91:1
Rated RPM: 800
Firing order: 1-2
Coolant capacity: 52qts / 49.2L

ENGINE DETAIL 2

Description: John Deere all fuel 2-cylinder liquid-cooled/The larger 501 cubic inch engine was introduced in 1927, replacing the 465
Displacement: 501ci / 8.2L
Bore/Stroke: 6.75x7.00inches / 171x 178mm
Compression: 3.91:1
Rated RPM: 900
Firing order: 1-2
Oil capacity: 13qts / 12.3L
Coolant capacity: 52qts (early) / 49.2L 56qts (after 1931) / 53.0L

JOHN DEERE D ENGINES

Description: John Deere 7.6L 2-cyl all fuel John Deere 8.2L 2-cyl all fuel
Fuel tank: 18gal (early) / 68.1L 23.5gal (after 1931) / 88.9L
Aux. fuel: 2.5gal (early) / 9.5L 1.5gal (after 1931) / 5.7L

TRANSMISSIONS OVERVIEW

Description: 2-speed unsynchronized gear 3-speed unsynchronized gear

TRANSMISSION 1

Type: unsynchronized gear
Gears: 2 forward and 1 reverse
Description: Original transmission, used from 1923 to 1935

TRANSMISSION 2

Type: unsynchronized gear
Gears: 3 forward and 1 reverse
Description: Three-speed transmission was introduced in 1935

JOHN DEERE D TRANSMISSIONS

Description: 2-speed unsynchronized gear 3-speed unsynchronized gear

MECHANICAL

Description: Two-wheel drive Manual steering Open operator station with steel pan seat

POWER TAKE-OFF (PTO)

Rear PTO: optional
Rear RPM: 525

JOHN DEERE D TIRES

Ag front: 28x5 (steel) / 28x6 (steel) / 7.50x18
Ag rear: 46x12 (steel) / 12.75x28

DIMENSIONS & TIRES

Weight: 4090 to 5880 pounds
Front tire: 28x5
Rear tire: 46x12

D SERIAL NUMBERS

1929: 71645
1939: 142300
Final: 143799

D SERIAL LOCATION

Description: Operator's platform, ahead of seat mount

BELT PULLEY

Diameter: 13.25inches / 33cm
Width: 8.5inches / 21cm
RPM: 900
Speed: 3122ft/min / 951.59meters/min

About John Deere Tractor

The D model tractor is part of John Deere's 9R line of tractors. The D is classified as a Standard-Tread Tractors and which is mostly used for Agriculture Tractors operations. The engine of the D tractors is impressive. This configuration more effectiveness in the real world.